TAGARNO 180 mm Calibration Ruler Instruction Manual
- June 1, 2024
- TAGARNO
Table of Contents
TAGARNO 180 mm Calibration Ruler
Product Information
Specifications:
- Calibration Ruler Length: 180 mm
- Optimized for printers pushing long side or short side of paper out first
- Suitable for close-up lens: +3
- Version: 2019.11.05
Product Usage Instructions
Printing Instructions:
- Set scaling to None, 1:1, or 100%.
- Print on heavy paper, preferably 200 g/m2 (53lb).
- Note the printing direction of your printer – short side of paper out first or long side of paper out first.
- Choose the appropriate calibration ruler optimized for your printer’s printing direction.
Verification and Calibration:
- After printing, use an office ruler to verify that the printed ruler is exactly 180 mm long.
- Any calibration ruler that does not meet the specified criteria should be discarded.
- For ease of use, cut out the verified ruler for calibration purposes.
Additional Information:
The printing direction may affect the accuracy of the ruler, so ensure you
select the correct version for your printer.
FAQ
- Q: How do I know which calibration ruler version to use for my printer?
A: Check if your printer pushes the short side or long side of the paper out first and select the corresponding optimized calibration ruler.
Instructions for printing
Set scaling to None, 1:1 or 100 %
Print on heavy paper, preferably 200 g/m (53lb)
Please note if the used printer pushes the long or short side of the paper out
first.
- The printing direction may affect the accuracy of the ruler.
- After printing, use an office ruler to verify that the ruler is exactly 180 mm long.
- Any calibration ruler that does not meet these criteria should be discarded.
- For ease of use, the verified ruler can be cut out.
Read User Manual Online (PDF format)
Loading......