IKOHS 2500 Oil Radiator User Manual

2500 Oil Radiator
User Manual

CREATE
The life you want to live in

WELCOME

Thank you for choosing our old radiator. Before using the 1ppll1nce, carefully read these instructions to ensure It Is used correctly.
The safety precautions enclosed will reduce the risk of death, Injury, and electrical shock when correctly followed.
Keep the manual In I safe place for future reference, along with the completed warranty card, purchase receipt, and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no liability for customers failing to comply with these requirements.

SAFETY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge  If they have been given supervision or instruction concerning the use of the appliance in I safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in I safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
• CAUTION: Some parts of this product can become very hot and cause bums. Particular attention has to be given where children and vulnerable people are present.
• If the supply cord is damaged, It must be replaced by the manufacturer, its service agent or a similarly qualified persona in order to avoid I hazard.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as  I timer, or connected to I circuit that Is regularly switched on and off by the utility.
• WARNING: In order to avoid overheating, do not cover the heater.
• The heater must not be located Immediately below I socket-outlet.
• Do not use this heater In the Immediate surroundings of a bath, a shower or I swimming pool.

PARTS LIST

1. Wheel
2. Front control panel
3. On/Off switch
4. Radiator housing
5. Power cord holder

CONTROL PANEL

4. 24 hours timer off / Child lock

ASSEMBLY INSTRUCTIONS

1. To prevent damage, place the radiator upside down on a soft surface (for example a carpet)
2. Fix wheels on two plates with cap nuts. Wheels should be Installed between the two first and two last fins.
3. Insert the U-shaped hook into the wheels plate and fix it on the radiator by wing nuts.
4. Turn the heater upright Welt one minute before connecting the heater to a power outlet.
   

OPERATION

1. Press on/off switch and press the Power button to start the setting.
2. Press + or – to adjust the target temperature, 5-35 °C.
3. Press III to adjust the heating position (I, II, or III).
4. Press the Timer button to set the 24 hours timer off, “0” means the timer function is off. Press + or – to set the desired timer. The indicator light will light up when this function is activated.
5. Press the Timer button for 3 seconds, the screen will be locked and the light will be dim. To unlock the heater, press the Timer button for 3 seconds again.
6. The heater has a heating boost function. The heater will continuously work for 12 hours, while the temperature sensor does not work. In this mode, the indicator will be light up. (The function needs to be set on the app only)
7. When the heater is working, the will be light up.
8. For all the operations, the indicator light will stop twinkling when the user doesn’t operate the appliance for 10 seconds, it will work based on the setting before the twinkle stops.
9. The light of the screen will be dim after stopping the operation for 30 seconds.

APP CONNECTION

CREATE HOME application is available for Android and i0 (look for the app on Google Play or App Store or scan the QR code below). Depending on the provider; there may  be costs Involved In downloading the app.
This appliance allows you to operate the appliance via your home network 2.4 Gh. A prerequisite Is a permanent Wifi connection to your router and the free app CREATE  HOME.
We recommend disconnecting the appliance from the power supply when you are away from home to prevent unintentional switching on while you are away.

https://apps.apple.com/es/app/ikohs-home/id1479200310| https://play.google.com/store/apps/details?id=com.ikohs.home

1. Press the button for more than a second, and the indicator on the top right corner will flash rapidly. Open the app and follow the instructions to connect it.
2. Press the button once to turn on or turn off the W-Fi function.

TIP-OVER SAFETY PROTECTION

• This appliance Is provided with a safety device that will switch off the heater In case of accidental tipping over.
  To reset, disconnect the plug from the power for a few minutes, remove the cause of tipping over, then plug the appliance In again. If It still cannot be reset, ask a qualified technician to check and repair it.

OVERHEAT SAFETY DEVICE

• Your heater is fitted with a safety device to switch off the heater in the event of overheating. If the safety device is activated, please tum the heater off, unplug the appliance and let ft completely cool, Inspect for blockage of air Inlet or outlet, attempting to restart the heater then after.
• If the heater fails to operate or the safety device switches the heater off again, return the heater to your nearest service center for examination or repair.

MAINTENANCE AND STORAGE

• Always disconnect the appliance and let it completely cool before any maintenance.
• Use a vacuum cleaner to remove dust on grilles.
• Clean the outside of the unit with a damp cloth and then dry It with a dry cloth. Never immerse the unit in water, nor let water drip Into the unit.
• Always disconnect the appliance, let It completely cool, and clean It before storing it.
• If you do not use the device for a long period, put back the unit and the Instruction manual to the original carton and store in a dry and ventilated place.
• Do not place any heavy items on top of cartons during storage as this may damage the appliance.

CHARACTERISTICS

This product is only suitable for well-insulated spaces or occasional use.

Heat Output

| WARM
CONNECT
2000| WARM
CONNECT
2500| Type of heat input, for electric storage local space heaters only (select one)| WARM
CONNECT
2000|

WARM
CONNECT
2500

---|---|---|---|---|---
Nominal heat output| 2,0 KW| 2,5 KW| Manual heat charge control, with integrated thermostat.| NO| NO
Minimum heat output (Indicative)| 0,8 KW| 1,0 KW| Manual heat charge control, with room and/or outdoor temperature feedback.| NO| NO
Maximum continuous heat output| 2,0 KW| 2,5 KW| Electronic heat charge control with room and/or outdoor temperature feedback.| NO| NO
Maier electricity consumption| | Fan-assisted heat output| NO| _ NO
At nominal heal output| 1,983 KW| 2,467 KW| Type of heat output/room temperature control (select one).
At minimum heat output| 0,759 KW| 0,984 KW| Single state heat output and no room temperature control.| NO| NO
In standby mode| 0,0014 KW| 0,0014 KW| Two or more manual stages, no room temperature control.| NO| NO
| With mechanic thermostat room temperature control.| NO| NO
With electronic room temperature control.| NO| NO
Electronic room temperature control plus day timer.| YES| YES
Electronic room temperature control plus week timer.| NO| NO
Other control options (multiple elections poss be).
Room temperature control, with presence detection.| NO| NO
Room temperature control, with open window detection.| NO| NO
With distance control option.| YES| YES
With adaptive start control.| NO| NO
With working time limitations.| NO| NO
With black bulb sensor.| NO| NO

In compliance with Directives: 2012/19/EU and 2015/863/CU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated, and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves the application of the adminis­trative sanctions according to the laws.

CREATE
The life you want to live in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>