ZealSound K58-A Bluetooth Karaoke Microphone User Manual

ZealSound K58-A Bluetooth Karaoke Microphone User Manual

Preview

1. Power Button: long press for 3 seconds to turn on/off. Short press to toggle between different Mode(Bluetooth/ TF Card/ Aux Mode). Note: Double—click the power button can turn off/on the lights.
2. Previous
3. Next
4. Mode Button:
5. Short press to enter into volume adjustment for Microphone input, Reverberation Volume and Music Volume.
6. Long press to toggle among the different sound effects (Mag master mode/three kind of Magic Sound Modes/KTV mode).
7. Play/Pause Button:
8. Short press to play/pause the song on Music Apps. Long press to decrease the original voice. Press again to exit.
9. When during Duet Pairing Mode, double—click the Play/Pause button of the first K58—A microphone to control the play or pause on the second K58—A microphone.
10. Volume —
11. Volume +
12. TF Card Slot
13. Charging Port/Audio In
14. Headphone Jack(3.5mm)

Package Include

How to use ZealSound K58-A karaoke Microphone?

On/Off:
Long press the power button to turn the microphone on, accompanied with a prompt tone “Powered on”, and the color light blinks. If no TF card inserted, the microphone will enter into Bluetooth mode automatically, accompanied with a prompt tone “Bluetooth mode”. The microphone is ready for paring.

Bluetooth connection:
Open Bluetooth on your device, and then you will find “K58—A” on your Bluetooth list. Select and connect, accompanied with a prompt tone “Bluetooth has been connected”. It may take few seconds to paring.

Duet Pairing Mode: When you use two K58-A microphones, please connect the first microphone to your mobile phone via Bluetooth, and turn on the second K58-A microphone next, then double-click the Play/Pause button of the first K58-A, they will enter into Duet Pairing Mode. It will take about 5-10 seconds during pairing, please be patient to wait.

Warm Tips:

If Bluetooth cannot be connected:

• a. Please restart the microphone.
• b. Move the phone closer.
• c. Avoid any obstacles.
• d. Check if any other device is paring with k58-A.
  If yes, please Unpair previous device.

TF card Playing/Music Mode:
When the TF card is inserted, the microphone will play music from TF card automatically. Only MP3 and WAV audio files are available. (TF card capacity: No more than 32G).

Sound effects:
Recording: Long press “Mode Button” to start Mag master mode/Magic Sound Modes/KTV mode. In turns is Master voice, Lori voice, Female voice, Male voice and KTV mode. Long press to toggle among the different sound effects.

Volume Adjustment:

1. On Bluetooth Mode:
2. Adjust volume on your music device
3. Short Press “—” or “+” on K58—A to — or + ;
4. On TF Card Mode
5. Short Press “—” or “+” on K58—A to — or + ;
6. On Audio cable music Mode:
7. The volume ONLY can be adjusted on your music device. The volume +— button can NOT work.
8. Microphone volume /Reverberation/Music volume adjustment
9. Short press ” Mode Button “once, twice or thrice, till it announced the right selection, and then press “—” or + on K58—A to — or + ;

Music Recording:

You can record your voice on Bluetooth Mode via App on your phones. For better recording effect, please use enclosed Type—C to 3.5mm Audio Cable. (A lightning to 3.5mm adapter cable is needed for iPhone, NOT included.)

How to Charge it?

Use the included Type—C cable to connect ZealSound k58—A to a computer or plug adaptor with USB. The charging indicator will be on red during charging, and will shut off when fully charged. It takes about 4-5 hours to fully charge .

Troubleshooting

Try it again after charging for 4 hours.
No sound or recorded sound is too low|

1. Check the volume setting of your microphone, phone or computer.
2. Make sure the microphone is fully charged, especially when you use it for the first time.

No Echo/reverberation effect| Follow the Volume Adjustment on page 4.
Voice volume is too low| Follow the Volume Adjustment on page 4.
Noise while singing|

1. Check if it caused by poor contact.
   Unplug and plug the audio cable again.

2. Try with another phone to
   test if it is caused by incompatibility.

3. Signal interference by other device.

4. Move the mic a little far away.

Poor sound quality| Check if Bluetooth connection distance is beyond of range or any barriers between k58—A and mobile phone
When singing, volume of background music is too low or no sound| Adjust the volume of the
music APP of the phone.
Bluetooth can’t connect|

1. Please restart the microphone
2. Move the phone closer.
3. Avoid any obstacles.
4. Check if any other device has paired with k58—A. If yes, please disconnect the previous.

Sound on Bluetooth music play is distorted|

1. Low battery, please charge
2. Check if vocal decrease mode is on (Long press the button to exit)

Bluetooth was connected But No Sound|

1. Adjust volume on music device.
2. Check if the Play/Pause button on.
3. Adjust volume of K58—A
4. Change other music player

Technical Specifications

Precautions

1. Please do not expose in rain or moisture;
2. Please do not disassemble and repair and retrofit;
3. Please keep and use in normal ambient temperature;
4. Please do not drop, avoid the damages due to falling;
5. Please charging it with microphone rated voltage;
6. Unauthorized disassemble invalidates the warranty;
7. Long time exposure to high volume may hurt your hearing, please avoid too high volume.
8. Working Temperature: —10-40°C, Relative humidity: 10% —95%RH

Warranty

We provide one year warranty for the ZealSound K58-A Wireless Bluetooth Microphone. This warranty will become void if the equipment is altered, misused, mishandled, maladjusted or suffers excessive wear. If you have more questions, please do not hesitate to contact our after-sale customer service via email [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>