IKOHS Retro Fridge 83.5 Gold/Black Fridge with Gold Handle/Mini Bar User Manual

Retro Fridge 83.5 Gold/Black Fridge with Gold Handle/Mini Bar
User Manual

Thank you for choosing our fridge. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury, and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt, and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no lia­bility for customers failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

1. Make sure your outlet voltage and circuit frequency correspond to the voltage stated on the appliance’s rating label If this Is not the case, please contact the after-sales service and do not use the refrigerator.
2. Use a dedicated circuit to avoid the main circuit getting overloaded as it may blow the fuse or circuit breaker.
3. To protect against fire and electrical shock, do not immerse the cord, plug, power base or the body of the Retro Fridge itself in water or other liquids. Do not expose the electrical connections to water.
4. The cord should be placed In such a way that there is no risk of anyone accidentally pulling it or tripping over it.
5. Do not kink, bend, squash, strain or damage the power cord and protect it from sharp edges and heat sources.
6. Do not pull out the mains plug by tugging the cable.
7. Do not let the cord hang over the edge of a table or benchtop. Do not let it come in contact with hot surfaces.
8. Do not pick up or operate the appliance If the power supply cord or the plug are damaged, or if the refrigerator is malfunctioning or has been dropped or damaged in any way.
9. In case of damage, contact the aftersales service.
10. A damaged cord or plug must be exclusively replaced by the manufacturer or a qualified person in order to avoid injuries.
11. Make sure all of the electrical connections are clean and dry before switching anything on.
12. Do not connect this appliance to an extension cord.
13. Unplug the appliance from the power outlet when it’s not in use and before cleaning, ser­vicing, moving or maintenance of the refrigerator.
14. Supervision or instruction concerning the use of the appliance In a safe way and understand the hazards Involved.
15. To avoid the risk of children becoming trapped and suffocating, do not allow them to play or hide inside the appliance
16. Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of the unit, as these will scratch the surface.
17. Ensure that all the parts are correctly assembled before operation.
18. If the product Is defective or if It has been damaged In any way, please contact the after­sales service.
19. If there is smoke coming out of the appliance or it has an unusual smell, unplug it immedi­ately and contact the after-sales service.
20. Place the product on a level and stable surface, away from direct sunlight or excessive heat.
21. Do not place the product near heat sources such as radiators, heat registers, stoves or other appliances that produce heat.
22. Do not place the product near other items that may damage It, such as naked flame sourc­es (lit candles) or objects containing water (such as a vase or a glass).
23. Care should be taken so that objects do not fall and liquids are not spilled into any open­ings.
24. The Manufacturer declines any liability for Injury or damage to property If the above advice and precautions are not respected.
25. Prevent overheating: Place the product in a well-ventilated room. Ensure that air can circu­late freely around the back of the refrigerator.
26. To ensure the best performance, leave a distance of approximately 100 mm on all sides of the fridge.
27. This appliance features a short power cord to reduce the risk of the cable getting tangled and people tripping. Do not use single/multi adapters or extension cords.
28. There are no user-serviceable parts inside. Do not attempt to repair this product. Please contact our aftersales service.
29. Before its first use, It ls advisable to wait at least eight hours before connecting the appli­ance to enable the oil ejected from the compressor to return to the crankcase.
30. Make sure there is proper air circulation around the appliance to prevent overheating. To ensure there is enough space follow the installation instructions.
31. The appliance must not be located near radiators or cookers.
32. Make sure that the mains plug is accessible after installing the appliance.

DAILY USE

1. Always allow hot foods and drinks to cool to room temperature before putting them in the compartment.
2. Store pre-packaged food according to the instructions on the label
3. WARNING! Do not use mechanical, electric or chemical means other than those recommend­ed by the Manufacturer to speed up the defrosting process.
4. Never use a sharp or metal instrument to remove frost or clean the appliance. Use a plastic scraper, if necessary.
5. Strictly follow the refrigerator’s storage guidelines. Refer to relevant instructions.
6. If the refrigerator is unplugged, turned off, or has lost power, you must wait for 3 to 5 minutes before restarting the unit. If you attempt to restart it before this time delay, the refrigerator will not start

FLAMMABLE – REFRIGERANT GAS WARNING

• Danger! Risk of fire or explosion. The flammable refrigerant was used. Maintenance and repair work may only be carried out by authorized and appropriately trained personnel Do not damage the appliance’s refrigerant circuit pipes.
• Caution! Risk of fire or explosion. Dispose of the refrigerator in accordance with federal and local regulations. Refrigerants must be evacuated in accordance with established proce­dures.

appliances with isobutane (R600a): isobutane is a natural gas without environmental impact, but it is flammable. Therefore, make sure the refrigerant circuit pipes are not damaged. Keep special attention in case of damaged pipes emptying the refrigerant circuit.
WARNING: Do not damage the refrigerant circuit! Never use an appliance with a damaged refrigerant circuit! If the refrigerant circuit is damaged, avoid proximity to open fires and all types of heat and sources of Ignition. Thoroughly ventilate the room in which the appliance is located.

• It is hazardous for anyone other than an authorized service person to service this appliance.
• The room in which the appliance is located must be at least 1m3 per 8g of refrigerant. The amount and type of refrigerant in the appliance can be found in the Technical Specifica­tions.
• Do not use or place electrical devices inside the appliance compartments if they are not of the type expressly authorized by the Manufacturer.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• During transportation and installation of the appliance, ensure that none of the compo-nents of the refrigerant circuit becomes damaged.
• Avoid open flames and sources of ignition.
• Thoroughly ventilate the room in which the appliance is located.
• It is dangerous to alter the specifications or modify this product in any way.
• A damaged cord can cause a short circuit. fire and/or electrical shock.
• Excessive weight hazard. Take extra care when moving the fridge to avoid any injuries. This may require two people or mechanical aid when installing the fridge. Failure to do so can result in back injuries, amongst others.
• Avoid prolonged exposure of the appliance to direct sunlight.
• This appliance is intended to be used indoors only.
• All electrical components (plug, power cord, compressor, etc.) must be exclusively replaced by a certified service agent or qualified service personnel.
• DO NOT USE AN EXTENSION CORD. Plug the appliance into a grounded socket: the appli­ance must be correctly connected to an approved earthing system. Do not use single/multi adapters or extension cords.
• Make sure that the power plug is not squashed or damaged. This could lead to overheating and cause a fire.

PARTS LIST

•  Freezer
•  Internal light
• Adjustable shelves
•  Wine shelf
•  Hinge
•  Crisper drawer
• Leveling foot
• Adjustable thermo­stat
• Door shelves
•  Anti-tip bottle racks

UNPACKING

• This product has been packaged to protect it against transportation damage. Remove all packaging materials from around and inside the appliance, but do not remove any foam insulation surrounding the pipes at the back. Keep the original packaging and materials in a safe place; this will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the event that the packaging is to be disposed of, please recycle all packaging materials where possible.
• Plastic wrapping can constitute a suffocation hazard for pets, babies, and young children. Ensure all packaging materials are out of their reach and disposed of safely.
• Parts: Check to ensure you have all the parts shown at the beginning of this manual
• Unwind the power cord completely and inspect it for damage. Do not use the appliance if the refrigerator or its cord has been damaged or if they are not working properly. In case of damage, contact our aftersales service.
• Make sure the refrigerator is disconnected from the power supply before cleaning the in­terior surfaces and all internal accessories with lukewarm water, a soft cloth, and neutral cleaning agents. This will remove any dust from transit and storage and will help remove the typical smell of a brand-new product. Dry thoroughly. Important: do not use harsh or abrasive detergents or powders, as these will damage the finish.

DOOR HANDLE INSTALLATION

The door handle comes detached due to packaging restrictions. It can be easily attached following the instructions.

• Fix the two screws (1) to the door.
• Insert the two fixed screws into the two holes on the metal handle (2).
• Fasten the two screws (3) to the bottom of the handle.

FRIDGE INSTALLATION

Before installing your new fridge, read all of the safety guidelines in this manual and then follow the instructions below:

• Place the fridge on a sturdy, level floor for quieter operation. Ensure that the floor is strong enough to support the fridge when it is fully loaded.
• If the refrigerator is to be placed on a carpet, put a wooden board in between the fridge and the carpet. Be aware that, by placing the refrigerator on top of a carpet, the heat from the compressor may cause the carpet to fade.
•  This appliance is designed to be freestanding and it should not be recessed or built-in.
•  Do not tilt the fridge more than 45° from its upright position when moving it.
•  Avoid areas where the appliance would be exposed to direct sunlight, sources of heat (stove, heater, radiator, etc.), extremely cold ambient temperatures or excessive moisture and high humidity. Installing it in the coolest area of the room will save energy consumption and running costs.

Handle with care

Do not apply force to any area such as the condenser or the door. The metal rails on the bottom of the refrigerator may have sharp edges, so always unpack and handle them with care. Do not drag the unit: place it carefully into position to avoid scratching the floor.

Space requirements

• Place the unit so there is enough space for the door to open.
• Ensure that air can circulate freely around the back of the cabinet, which is necessary for cooling the compressor and condenser. To ensure proper ventilation for your refrierator, allow for 50mm of space on each side and at the top. Allow for 100mm of space behind the refrigerator.

Leveling

• The appliance must be level in order to work properly. If the unit is not level, the doors and magnetic seal alignments will not be covered properly.
• Your refrigerator has two adjustable front feet, one on the right and one on the left. In most cases, the refrigerator should be steady when both feet are touching the floor. If your refrig­erator seems unsteady or if you want the doors to close more easily, adjust the refrigerator’s tilt by leveling the feet.

ADJUSTING THE THERMOSTAT

• To start the refrigerator, turn the thermostat knob to the position corresponding to the desired temperature. The temperature of the refrigerator is controlled by adjusting/setting the thermostat knob, located at the top of the cabinet.
• The settings O(OFF) – 7(MAX) regulate the internal temperature of the refrigerator. Setting O (OFF): not operating (Please press the knob and turn to get the “O” position). Setting 1 (Min.): lowest setting (warmest internal temperature). Setting 7 (Max.): highest setting (coldest internal temperature).

NOTE: The refrigerator temperature will vary depending on the number of cans/bottles stored and on the frequency with which the door is opened. The internal temperature varies in different parts of the refrigerator. The back of the refrigerator is the coldest. Please keep the cans/bottles away from the rear wall to avoid them freezing and to allow cold air circulation.
NOTE: The thermostat’s 0 (OFF) position indicates that the refrigerator is turned off even though power is still being supplied to the appliance. By turning the thermostat knob to the left, the refrigerator will turn on automatically. When the refrigerator is not going to be used for a long period of time, disconnect the plug and leave the door partially open.

DEFROSTING

The surface of the evaporator ices up when the refrigerator is working. This is an entirely normal part of the operation. If the frost layer is more than 3mm (1/8″) thick, the refrigerator must be defrosted and cleaned to avoid unnecessary energy consumption and inefficient operation.

• Remove all of the items from the inside and unplug the refrigerator.
• After defrosting, clean the refrigerator and allow it to dry.
• Reconnect to the mains supply and turn the fridge on.

WARNING: Food should not be stored in the freezer in contact with its wall. When the sur­face of the evaporator freezes it creates a thin layer of ice that would end up turning anything In contact with this part of the freezer into a block of Ice, which would also hinder the correct functioning of the product.

REPLACING THE LE D LIGHTBULB

Your fridge uses a long-life, energy-saving LED lightbulb. Should you need to replace this light, please contact your nearest retailer or service agent for a suitable replacement part.
To replace the lightbulb:

1.  Disconnect the appliance from the power supply.
2. To remove the light shield, gently squeeze the light shield and slightly turn It deals, then remove the screws on both sides.
3. Gently pull out the connectors and take out the lightbox, but keep the controller and the thermostat knob.
4.  Insert the connectors into the new light box, place the controller and thermostat knob back, and fasten them.
5. Put the light cover back and adjust it by turning it on widdershins.

FOOD STORAGE

• The refrigerator compartment is suitable for the short-term storage of fresh food. The internal temperature of the appliance may be affected by the ambient temperature, frequency of door opening, as well as location of the appliance. When setting the temperature, these factors should be taken into consideration.
• In order to maintain good cooling efficiency and save energy, we recommend you do not open the door for too long or too often. Do not overload the fridge, and leave enough space around items to allow cold air to flow. Do not block ventilation openings.
• The shelves can be positioned to suit individual storage requirements.
• In order to keep vegetables fresh and crisp, make sure they are properly packaged and the cover sits firmly on top of the crisper drawer (applicable model).
•  You can conveniently store two wine bottles in the hanging wine rack. If you don’t need this wine rack, or you wish to remove it for cleaning, pull the shelf that holds the rack completely out of the fridge, then slide the wine rack off the side of the shelf (applicable model).

ENERGY-SAVING TIPS

• Install the refrigerator in a cool, well-ventilated place, protect it from direct sunlight and keep well away from heat sources.
• Do not put hot food in the fridge or freezer. Wait for foods and drinks to cool to room tem­perature before placing them in the fridge.
• Do not overload the fridge, as it forces the compressor to run for longer.
• Wrap foods properly and wipe containers dry before placing them in the fridge. This cuts down on frost build-up inside the fridge.
• Do not line any fridge container with aluminum foil, wax paper or paper towels. Liners In­terfere with cold air circulation, reducing cooling efficiency.
• Position food so that air can circulate freely around it (food should not touch each other and try to leave space between food and the rear wall).
• Do not leave the fridge door open for longer than required to prevent the unit from over­heating.
• Make sure the food doesn’t touch the back of the compartment.
• Don’t set the thermostat to extremely cold temperatures.

GOING AWAY?

1. Short vacation: Leave the fridge running during vacations shorter than a month long. Use up any perishables and freeze other items.
2. Long vacation: Disconnect the appliance from the power supply, empty it, defrost it (if nec­essary) and clean It. To prevent odor and mold growth, keep the doors slightly ajar to let air circulate inside the compartments, blocking it open, if necessary. (While the fridge remains open, restrict children’s access to the room to avoid child entrapment).

MOVING THE FRIDGE

• Unplug the fridge and remove all food from the Inside. Clean, wipe and dry thoroughly.

• Securely tape the doors closed and tape the power cord to the back of the refrigerator. Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

•  Depending on the model, raise the front of the refrigerator so it rolls more easily OR screws in the leveling feet so they don’t scratch the floor.
  CAUTION! Never pick the refrigerator up by the door.

• Protect the outside of the unit with a soft. clean surface, such as a towel, blanket or piece of cardboard and make sure the fridge stays secure in an upright position during its trans­portation.

CLEANING AND MAINTENANCE

INTERNAL CLEANING

•  Do not pour water over the appliance.
• The cavity should be cleaned periodically using a solution of baking soda and lukewarm water (5ml to 0.5 liter of water)
• Hand wash, rinse, and dry removable parts and Interior surfaces thoroughly. Use a clean sponge or soft cloth and mild detergent in warm water. Do not put them In the dish­washer.
• Do not use abrasive products, detergents or soaps.
• After washing, rinse with clean water and dry carefully.
• Once you have finished cleaning, plug in the refrigerator or reconnect power with dry hands.

EXTERNAL CLEANING

• Wash stainless steel and painted metal parts with a clean sponge or soft cloth and a mild detergent in warm water.
• Take caution when cleaning as there are sharp edges on the bottom of the unit.
• Once or twice a year, dust the back of the appliance with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause an increase of energy consumption.

WARNING

• Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flam­mable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, Interior and door liners, or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. Never use flammable fluids or sprays for cleaning as the fumes from these substances can create a fire hazard or explosion.
• Never clean the appliance with a steam cleaner. Moisture could accumulate in the electrical components. Failure to follow this recommendation could result In electrical shock. Hot steam can lead to damage to plastic parts.
• The appliance must be completely dry before it is turned back on.
• Essential oils and organic solvents (e.g. lemon Juice or Juice from an orange peel) and cleansers that contain acetic acid can damage the plastic parts. Do not clean the appliance with substances such as these.

TROUBLESHOOTING

DISPOSAL OF OLD APPLIANCES AND PACKAGING

Be sure to make any locks unusable, remove any doors and discard them separately. Warning – chemical hazard: do not allow children to play with the old appliance. Contact your local authority for disposal procedures.

• Before disposing of an old appliance, please make sure it is switched off and safe. Unplug the appliance and break any locks in order to avoid children becoming trapped.
• Please note: the refrigeration system contains gases and refrigerants which require spe­cialist waste disposal The valuable materials contained in a refrigerator can be recycled.
• You can contribute to environmental awareness by insisting on an appropriate non-pollut­ing method of disposal.
• Do not allow pets or children to play with the packaging, and dispose of plastic bags safely.
• The cardboard can be broken or cut into smaller pieces and recycled. The wrapping covers are made of polyethylene. The polyethylene pads and padding don’t contain fluorochloric hydrocarbons, and therefore they are recyclable.

WARNING!

Risk of child entrapment. Before you throw away your old appliance:

• Take off the doors.
• Leave the shelves in place so that children may not easily climb inside.
• Cut the power cord as close to the appliance as you can.
• If this appliance, featuring a magnetic door seal, is to replace an older appliance having a spring lock (latch) on the door or lid, please make the spring lock unusable before you discard the old appliance. This will reduce the risk of trapping children or animals inside.

Read more: https://manuals.plus/create/83-5-gold-retro-fridge- manual#ixzz7gXbPr7lF

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>