EDIFIER MF5P Portable Voice Amplifier User Manual
- June 6, 2024
- Edifier
Table of Contents
EDIFIER MF5P Portable Voice Amplifier
PRODUCT OVERVIEW
Box contents
Note: Images are for illustrative purposes only and may differ from the actual product.
IllustrUser guideation
- Mode switch button
- Previous track
- Play/pause
- Next track
- Recording button
- AUX input
- Microphone input
- Turn on/off / volume control
- Charging port
- microSD card slot
- USB connector
- Status indicator
User guide
Charge the amplifier
Battery level: The red light will flash rapidly along with prompt tone
when the amplifier is at low battery level.
Charging: Insert the USB charging cable into the charging port (DC IN)
for charging, and the red light will be steady lit during the charging.
Charging completed: The red light will turn off, please unplug the
adapter and charging cable.
Note: Charging this product outdoor or at high temperature may be disabled for charging protection. Therefore, please charge it indoor or at room temperature.
Turn on/off
“OFF” direction: turn off; “ON” direction: turn on; Volume level will be increased when rotating toward the “ON” direction, and will be decreased when rotating toward the “OFF” direction.
Sound amplification mode
Preparations for amplification:
- Wired microphone: insert the microphone into the “MIC” port (Figure 1)
- Standard way of wearing the microphone (Figure 2)
How to operate the microphone:
When wearing the microphone, please align its front side with mouth to speak,
and the voice will be loud and clear without whistling sound. When speaking,
wrap the microphone with black cotton to filter other interfering sounds. If
does not speaker toward the front side of the microphone, the voice may be
small or whistling sound may occur, etc. If amplifies sound while playing
music, press and hold the ” ” button for 3 seconds to switch the Microphone
Priority function.
Note: Microphone Priority enabled: background music will pause when speaking;
Microphone Priority disabled: background music will still play when speaking;
Audio input
AUX mode:
Insert an audio cable into the “AUX” port, press the button to switch to AUX
mode, and the green light will be lit along with prompt tone.
microSD card/USB flash disk mode:
Insert a microSD card or an USB flash disk into the corresponding slot, the
purple light will be lit along with prompt tone, and the amplifier will auto-
play MP3 file in it. In other modes, press the ” ” button to switch to microSD
card/USB flash disk mode. When playing in microSD card/USB flash disk mode,
press and hold the ” “/” ” button to rewind/fast-forward; press and hold the ”
” button to switch to single loop/full loop.
Bluetooth mode:
Press the ” ” button to switch to Bluetooth mode, and the blue light will
be lit along with a prompt tone.
Bluetooth connection:
For initial connection or there is no Bluetooth device connected, the blue
light will flash and the amplifier is waiting for connection;
Set your Bluetooth device (mobile phone, tablet, etc.) to search for and
connect to “EDIFIER MF5P”, after pairing is successful, the blue light will be
steady lit.
Disconnect Bluetooth:
To disconnect Bluetooth and enter pairing state, press and hold the ” ” button
in Bluetooth mode.
Recording mode
Preparations for recording of wired microphone:
- Insert the microphone into the “MIC” port;
- Insert a microSD card or an USB flash disk into the corresponding slot (recording files will be saved in MP3 format);
- Switch to AUX mode or Bluetooth mode.
Recording procedures:
- Press the ” ” button to enter the recording mode and there will be prompt tone;
- End recording: press any button to end recording;
- Play recording: press and hold the ” ” button for 3 seconds to switch to recording-playing mode and there will be prompt tone; press the ” ” button to play/pause, and press the ” ” or ” ” button to switch recording.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>