WiFi V3 Motion Sensor Instructions

WiFi V3 Motion Sensor

Installment

1. Use the Screw to install the base of the PIR base to the wall or other vertical place.
2. install the main body on the base.

Detect angle and distance:

Specifications

• Battery: AAAl.SV x 3
• Standby current, 20uA
• Standby time, 1 years
• Standard Mode, S months (15 times/day)
• trigger one time every two minutes
• Eco Mode, 5 months (15 times/day)
• trigger one time every four minutes
• Sensitivity distance: Sm
• Sensitive angle: 120°
• Wireless Type:2.4GHz
• Protocol:IEEE 802.llb/g/n
• Wireless Range: 45m
• Operating Temperature:-30-70 C (-80″F-158″F)
• Operating Humidity: 20% ,..__, 85%
• Storage Temperature:-40°C- 80°C(-104°F-176’F)
• Storage Humidity:0% ,…__, 90%
• Size:65mm x 65mm x 30mm

Download App

1. Android phone: download”Smart life” from Google Play.
2.  iPhone: download”Smart life” from App STORE.

Add Device

1. Run “Smart life” from your smartphone desktop.
2. Register and log in

Motion Sensor
Select Device Type, and select”Wi-Fi Connector” in the list to add the device.

**Network Configuration

**

There are two methods to bind the door sensors to App. One is Smart Wifi Mode and the other is AP Mode.

1. Smart Wifi Mode:
   Press and hold:”WiFi Coding/ RESET Button” for 6 seconds, the indicator will blink rapidly. The device is in Smart Wi-Fi Mode.

2. Ap Mode:
   Select AP Mode at upper right corner on the App. Press and hold:”WiFi Coding/ RESET Button” for 6 seconds again, the indicator will blink slowly, and the device is in AP mode. After entering your WiFi password and connect your phone to door

3. Connecting

Motion Sensor:

Customize Scenes
associate two devices to work to create your own scene

Share & Push Notification
Share: Share your devices to others directly.

LED State

Reset

| Long press the reset key for 4s , red led light rapidly blink 20s,then it will be ready for configuration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>