RV WIFI 12V System Dishy Dock Instruction Manual
- June 1, 2024
- RV WiFi
Table of Contents
RV WIFI 12V System Dishy Dock ****
Introduction
Welcome to RV WIFI Dishy Dock, your complete Star link Integration System.
This is the first part of the Integration System and a great way to pre wire
your RV for Star link.
Other parts to add to your installation include:
- RV WIFI Dishy dock Power – 12volt power adapter
- RV WIFI Dishy Dock Router or RV WIFI 5G router
Inclusions in this kit
- 2 x Internal Dishy Docks/RJ45 ports
- 1 x 5000 meter Dishy Dock Ethernet cable
Please note : this installation is required to be located in a waterproof environment. It is NOT a weatherproof product. For the weatherproof version, please choose RV WIFI Installation ‘Weatherproof’.
Installation Guide
- Choose your Port1 & 2 locations Internal & External).
- The external Port must be located in a sealed TV box, Tunnel Boot, External Storage Box or other such waterproof locations with cavity access to rear.
- the internal port in a cupboard, with enough space to fit both the Dishy Dock Power, Dishy Dock Router & install a 10A/12V dual power socket beside it.
- Feed the Ethernet Cable through the wall cavity from port 1 to port 2.
- Drill a 29mm sized hole to insert the Dishy Dock into the wall cavity. Do not drill through to other side of wall.
- Plug one end of the Ethernet Cable into the rear of Port 1.
- Attach the Port with screws to the wall material and snap on cover.
- Repeat the installation for Port 2.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>