WiFi Independent PIR Infrared Detection Alarm User Manual

June 9, 2024
WiFi

WiFi Independent PIR Infrared Detection Alarm User Manual
WiFi Independent PIR Infrared Detection Alarm

Product diagram

Product diagram

1.LED lights 2.Set key
 3.USB power port 4.Detection window
5.buzzer 6.Spare battery compartment
7.Bracket slot
  1. Mountiong brackets
    First use

  2. Connect to power

  3. Turn on (enter induction alarm)
    induction alarm

  4. Trigger induction alarm
    induction alarm

  5. Turn off the sensor alarm

Turn sensor alarm

Mobile app

  1. Download app

    • Tuya smart

    • Smart life

    • Scan the QR code to download the APP.

    •  IOS: Download the “Tuya Smart” or “Smart Life” at APP Store.

    • Android: Download the “Tuya Smart” or “Smart Life” at Google Play.

  2. Register/ login tuya smart

  3. Network configuration with mobile phone (two methods) Method 1: Wi_ Fi quick connect

Mobile app Mobile app
Observe whether the I.ED light flashes quick!). If it is not flashing quickly, press and hold for 5 seconds.

Mobile app 
Connection Failed please select hotspot network confguration mode

method 2: Hotspot distribution network

distribution network

distribution network

working status selection

Prompt sound Alarm lamp Status
Di Blink 1 time Turn on sensor alarm
Didi 2 flashes Turn off the sensor alarm

installation

  1. Installation method
    place the table (recommended)

wall installation

  1. a fixed way

  2. 0 3M doutde-sided tape fixed
    Tear off one side of the 3M double-sided adhesive film
    installations
    Attach to the bottom of the bracket
    installations

  3. Screw fixation
    a. Draw a line on the installation position to make the positioning hole. Then hammer it into the expansion pipe as the figure below:

b. Screw in the screws with a cross screwdriver in clockwise direction as the figure below:

c. Shown as the figure below
installations

Common problem

When the battery is dead and the USB is
Apowered, the alarm does not sound (or makes a sinling sound), just remove the battery and reconnect the USB cable.

When the power of the infrared detection alarm is lower than 20%, the APP will push a low-voltage alarm.

Detection angle

Detection angle

Technical Parameters

Main power supply: USB DCSV power supply Working voltage: 5V Standby current: 20mA Alarm current: 60mA Alarm sound: <90dB Detection distance: 6 – 9m (Affected by the environment) Backup battery: 2 AAA batteries Working temperature: -10°C — .50°C Anti-pet interference: Below 25KG WiFi standard: IEEE 802.11 b 2.4GHz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals