expert4house IR02 V1 WiFi Smart Home Sensors Instructions
- June 6, 2024
- EXPERT4HOUSE
Table of Contents
- expert4house IR02 V1 WiFi Smart Home Sensors Instructions
- Product Configuration
- LED State
- How to reset?
- Get Started with Tuya Smart App
- What’s the App User Interface Like ?
- Experience Advanced Features
- Main fuction
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
expert4house IR02 V1 WiFi Smart Home Sensors Instructions
Product Configuration
Specifications
Power Supply: USB 5V/1A
Infrared Frequency: 38-56Khz
Infrared Distance: 7M
Infrared Angle: 360°
Max Current: 110mA
Max Power: 0.55W
Wireless Type: 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Wireless Range: 45M
Operating Temperature: 0℃～40℃ (32°F～104°F)
Operating Humidity: 20% ～85%
Storage Temperature: 0℃～60℃ (32°F～140°F)
Storage Humidity: 0%～90%
Size: 60mm x 60mm x 20mm
Support: Amazon Echo, TMALL GENIE, Rokid
LED State
| Device Status | LED State |
|---|---|
| Smart Wi-Fi | Indicator flashes quickly |
| AP mode | Indicator flashes slowly |
| Remote control | Indicator flashes one time |
| Standby | Indicator OFF |
Reset/Switch to
adding staus
| Long press reset button for 5-7s
How to reset?
- Press the reset button for 6 seconds till the indicator flash Then device turns to smart wifi mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
- Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile .
- Register and Login
Launch the “Smart life” app.
To register,enter your mobile phone number or email address,create a password
,then login to the app.
Login if you have an account already.
- Add Device
Power on the smart sensor which default’s mode is
Smart WiFi mode .
Select the “ + ” symbol on the top right-hand corner . Select your
product type and follow the instructions of the app.
If the connecting fails,try using AP Mode
On the “ Add device ” page select “ AP Mode ” on the top right-hand
corner and follow the instructions of the app. Finally,have fun!
What’s the App User Interface Like ?
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main fuction
- Add Remote Control: Click “Add Remote Control”, select adevice type and follow the instructions of the app.
- Learning function (DIY): keep close enough between the sensor and the device you want to control.
Linkage alarm setting
- To connect two Sensors via scene setting.
Device sharing
- Allow others to control the device
Push motivation
- Open/close push motivation
Remove device
- Restore default settings; Delete and add the device again to clear the record by APP.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>