TESLA 162588WLESS Wireless Phone Charger User Guide
- June 6, 2024
- Tesla
Table of Contents
TESLA 162588WLESS Wireless Phone Charger
OVERVIEW
POWER STATUS
Press Power Button quickly to view the remaining capacity.
WIRELESS CHARGING
Press and hold Power Button for 3 seconds to start wireless charging.
First LED will:
Be on when wireless charging is on
turn off in 30 seconds if wireless charging device is not detected turn off when
a foreign object is detected
WIRED CHARGING
Ensure the cable plugs into USB-A port in Wireless Charger and connect USB-C
plug to the mobile device. Press the power button quickly to activate output
charging.
WIRELESS CHARGING FOR CHARGER
Place the rear side of the wireless charger on the wireless charging device to
charge.
WIRED CHARGING FOR CHARGER
Ensure the cable plugs into USB-C port and connect USB-A plug into power
supply to charge the wireless charger.
PRODUCT SPECIFICATIONS
- Product Name: Mobile Power Supply
- Input: 5V/2.0A (Type-C) Output: 5V/2.0A; 9V/2.0A (USB-A)
- Rated Capacity: 10000mAh/38.5Wh Wireless Output Power: 5W;
- Maximum Fast Charging Support: 10W
Product Dimension: 141.5×70×160mm
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment .
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interferencE
- this device must accept any interference received, in including interference that may cause undesired
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference ce to radio communications. However, there is no guarantee that interference will not occur in a pa rticula r installatio n. If this equipment does cause harmful interferenc e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conne ct the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Cons ult the dealer or an experienced radio/TV technician for help .
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>