CGWD15A02HN Waer Dispenser Instruction Manual

WAER DISPENSER
INSTRUCTION MANUAL

CGWD15A02HN Waer Dispenser

Model : CGWD15A02HN

Read this manual carefully before operation
Pictures in this manual are for reference only, the product in kind prevail.
This instruction manual contains important information & recommendations that we would ask you to comply with to obtain best results from your proudcts.

CONSTRUCTION AND NAME

(Also suitable for desk-top water dispenser)

1. water guard
2. Power Indicator light
3. Heating indicator light
4. Normal water tap
5. Hot water tap
6. Drip box
7. Heating switch
8. Mains cord

(The picture is only for reference, it may not ve the picture of the model.}
VERY IMPORTANT! YOU MUST READ BEFORE USE.
Please check the water dispenser and carton for cvidence of rough handling and concealed damage. File damage claims with the carries or retum the water dispenser to the place of purchase.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
To place the unit steadily, please fix the Metal Fix Device we supply with the water dispenser, please fix tt between the unit and the wall with stecl nail or expanding nail.
UNITS WITH HOT TANKS
Note: On Hot and Cold units, the hot tank must be filled with water before connecting watcr dispenser to the clectneal source, Air must be bled out of the hot tank by depressing the hot side (red) faucet to fill the hot tank with water before energizing the unit. (The tank is full when water is free of air bubbles and flows from the hot faucet). All Hot and Cold units are cquipped with an On/Off switch, which controfs the hot tank. The On/Off switch is located on the rear of the water dispenser.

**BASIC OPERATIONAL GUIDELINES

**

First use, please fill the cold tank (semiconductor) with water. Air must be bled out of the cold tank by depressing the could side (green or blue) faucet to fill the cold tank with water. Always unplug the water dispenser from the wall outlet when out of water.
Locate the water dispenser cooled by semiconductor in a well-ventilated arca making sure there is at least 2” (about § cm) of clearance around the back of it for proper airflow. The noise level of the machine is below 70dB. Locate water dispenser within reach of a suitable grounded electrica) outlet. To help prevent algae growth, do not place water dispenser in direct sunlight or in front of heating vents. Do not locate water dispenser in area where the temperature may fal) below freezing. The water dispenser is pre-cleaned ai the factory. However, the reservoir and water lines must be sanitized and flushed with fresh water before use. Regular cleaning and sanitizing is advised to cnsure continued quality of water consumed. Before plugging in, check the power label on the rear of the unit to ensure the power supply is correct. Serious damage could result if the incorrect supply is used. ;
Never rest cigarettes on water dispenser top. Do not use it as a shelf for plants or storage of other objects. Keep area around water dispenser free of dust and ditt. If water accidentally splashes inside the water dispenser, unplug the unit, remove excess water and dry out before putiing back into service.
Do not locate water dispenser in area where the temperaturc may fall below freezing. The suitable surrounding tempetature is 10°C to 38°C. If ice-jam happened, let water dispenser stand for a few minutes to allow any ice in the reservoir to melt. Add hot water to speed up this process, and at the same time, remain the power off for a longer pcried of time when no one is using it, and this saves energy and prolongs the lilctime of the semiconductor.
Never place the water dispenser out of doors, it is not suitable. When used, please do not incline it exceed 45 degree. Please do not use it in water- spraying condition, the water dispenser also can not be sanitized by way of watet-spraying.

HOW TO CLEAN AND SANITIZE YOUR WATER DISPENSER

1. Unplug the water dispenser from the electrical outlet.
2. Shut off the water supply and remove the water guard.
3. Drain off any water left in the reservoir and hot and cold tanks through the faucets and drain plugs.
4. Fil cescrvoir 3/4 full of fresh clean water and add 1/2 tablespoon of liquid bleach to water. Do not use a stronger sanitizing solution!
5. Allow water to siand for 5 to 7 minutes.
6. Drain-sanitizing solution out of the reservoic through the faucets and drain plugs.
7. Flush thoroughly with clean water.
8. If a taste problem develops, place 1 tablespoon of baking soda into water tank and ad fresh water. Allow this solution to stand for 5 minutes, then drain.

Note: please do not clean the water dispenser with spraying water, besides, the machine can not be allowed to dip in any solution.
HOW TO REMOVE MINERAL DEPOSITS
Use a solution of distilled vinegar and water, and scrub reservoir with sponge or cloth. Do not use steel wool to clean reservoir. This will leave smali metal filings in the reservoir and it wil! eventually damage it.
CLEANING OF PLASTIC PARTS AND EXTERIOR PLASTIC
Periodic cleaning of drip tray, watcr guard, and reservior is required. To clcan, use liquid soap and warm water. Avoid using abrasive cleaners. Drip tray should not be used to dispose of unwanted beverages.
Do not use formulated cleaner or similar products on plastic parts. These products contain chemicals that can cause the plastics to become brittle. The water dispenser exterior can be cleaned with liquid soap and warm watcr.
Make sure washed parts are rinsed properly and all soap residuc is removed. (Do not use abrasive cleaners, which can scratch suyfaces.)

ELECTRIC DIAGRAM

A Quality Product of https://www.cginspiringlife.com/

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT INACCORDANCEWITH EC DIRECTIVE 2002/96/EC.
** At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer pro- viding this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-outwheeled dustbin.
Visit us at: www.cginspiringlife.com**

Documents / Resources

| CGW CGWD15A02HN Waer Dispenser [pdf] Instruction Manual
CGWD15A02HN Waer Dispenser, CGWD15A02HN, Waer Dispenser, Dispenser
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>