JUBEST TSQAL10-4FT 48 Bifold Door Hardware Instruction Manual
- May 15, 2024
- JUBEST
Table of Contents
JUBEST TSQAL10-4FT 48 Bifold Door Hardware
Product Information
- Specifications
- Model: TSQAL10-4FT
- Includes:
- x1 TSQAL10-4FT
- x6 ST4.2×32 screws
- x2 ST4.2×43 screws
- x24 ST4.2×16 screws
- x4 ST4.2×16 screws
- x18 ST4.2×25 screws
Product Usage Instructions
- Assembly Steps:
- Identify the components included in the package.
- Using the provided screws, assemble the TSQAL10-4FT following the assembly manual.
- Ensure all screws are securely fastened to prevent any loose parts.
- Maintenance:
- Regularly inspect the assembled product for any loose screws or parts. Tighten if necessary to maintain stability.
- Storage:
- Store the product in a dry and cool place to prevent any damage or corrosion to the screws.
- FAQ
- Q: How do I contact customer support?
- A: You can reach us at support@jubest.com. or visit our website at www.JuBest.com. for assistance.
TOOLS REQUIRED
HARDWARE INCLUDED
DIMENSION
Mounting Instruction
-
Mount track 3/4″ (19mm) from the front edge of the head jamb.
-
Mount hinges on the back of the door. Lay panels face down on a flat surface. ****
-
Fasten pivot plates to the top and bottom of doors as shown.
-
Mark the location of the Bottom pivot bracket on the jamb. Fasten in place with one ST4.2 X 25 flat head screw. ****
-
Hang doors: Make sure the Track pivot lock is in the unlocked position. (A) Fold the doors and insert the Door hanger plate into the track groove. Place the Top pivot into the receptor of the Track pivot lock. (B) When firmly seated, slide the tab lock toward the pin. The door now should be hanging from the Top pivot. (C) Depress the Bottom pivot bracket socket arm and insert the Bottom pivot. If no vertical adjustment is needed, secure the Bottom pivot bracket with the other 2 screws. Use a wrench for horizontal adjustment of the Top pivot lock and Bottom pivot bracket.
-
Mount knob.
-
Mount aligner on the back side of lead doors(4 door sets only).
-
Adjust the Track stop Close doors, and slide the Track stop until it touches the Door hanger plate. Open doors, move the Track stop 1/8″ (3mm) closer to the Door hanger plate and tighten, Doors should “snap” shut yet open easily with a slight pull on the knob.
Contact
- Website: www.JuBest.com.
- Feel Free to Contact Us: at support@jubest.com.