musictribe TRUE BUDS Wireless Earphone Instruction Manual

musictribe TRUE BUDS Wireless Earphone

Functions of keys

• Power On: Tap on the earpiece for 3 seconds
• Power Off: Tap on the earpiece for 3 seconds
• Volume Up: Tap the Right earpiece for a second
• Volume Down: Tap the Left earpiece for a second
• Next Track: Tap twice on the Right earpiece
• Previous Track: Tap twice on the Left earpiece
• Play the Track: Tap once on any earpiece
• Pause the Track: Tap once on any earpiece
• Answer incoming call: Tap once on any earpiece
• Refuse incoming call: Tap twice on any earpiece
• End the call: Tap once on any earpiece
• Last Number Redial: Tap twice on any earpiece
• Activate Siri: Tap thrice on any earpiece
• MIC: Microphone
• USB: micro USB charging port

Charging

The Bluetooth earphone has a built-in rechargeable battery and the battery power of a new headset is not enough; please charge for at least 1.5 hours to make the battery power enough before the first use. Hereafter, charging will take about 1-2 hours. While it is charging, the red light is on; while the charging is saturated, the red light will be off .

The pairing of the headset and Bluetooth device

The Bluetooth earphone must be paired with your mobile phone (or other Bluetooth devices) before use.

1. When taking off the earphone from the charging case, the earphone will be powered on automatically, will hear the voice prompt “power on “ and ”pairing”. But if the earphone is put outside a long time, if needs to power on, needs a long tap of around 3 seconds to power on.
2. Search the Bluetooth device on your Bluetooth earphone (please refer to the mobile phone instructions for a detailed process). When the search is finished, you will find a new device called “TRUE BUDS” in the device list.
3. Select TRUE BUDS which will be automatically paired and connected with the mobile phone; when the pairing connection is successful, will hear the voice prompt “pairing successful“
   Notes:
   In the process of pairing, some mobile phone requires inputting a pairing password, please input “0000”; The earphone will automatically shut down if it cannot find the paired device in 3-5 minutes; If the Bluetooth earphone is not in the pairing state, your mobile phone or other Bluetooth devices will not be able to search to the headset, please set the headset to the pairing state and then use the mobile phone to search again.

Bluetooth wireless call

When the Bluetooth earphone is paired and connected with your mobile phone, you can use the earphone to answer the phone or listen to the stereo music played mobile phone.

Dial out, answer and hang up of calls by mobile phone

Outgoing calls

1. Dial-out by mobile phone: Use your mobile phone to dial according to the way as usual, after dialing out, the earphone will make a ringing tone, the voice will be automatically switched to the Bluetooth earphone after putting it through. (Some smartphones need to have a choice.)
2. Last number redial: Tap twice on any earpiece to dial out the last dialing phone number.

Answering and hanging up calls
When a call comes in, you will hear a phone prompt sent by the earphone.

1. When the phone rings, Tap once on any earpiece to answer the phone.
2. When the phone rings, Tap twice on any earpiece to refuse the phone.
3. If you are in call, Tap Right earpiece for a second to increase the earphone volume, and Tap Left earpiece for a second to decrease the earphone volume.
4. Tap once on any earpiece, phone hang-up key or hang up by the other end to end the call, if the mobile

Wireless stereo music playing

The paired mobile phone shall support Bluetooth A2DP.

1. When the music is played, Tap twice on the Left earpiece to make the music jump to the previous song..
2. When the music is played, Tap twice on the Right earpiece to make the music jump to the next song.
3. When the music is played, Tap once on any earpiece to stop the music, and then Tap once on any earpiece to continue playing the music.
4. When the music is played, Tap Right earpiece for a second to increase the headset volume, and Tap Left earpiece for a second to decrease the headset volume.
5. During the stereo playing, if there is a dial-up or call, the stereo playing will be automatically suspended, and the stereo music will continue to be played at the end of the phone.

Low voltage automatic detection and power off

When the machine voltage is less than 3.3V, the red light will flash, will hear the battery low voice prompt. .When the voltage is less than 3V, the headset will automatically power off. Please recharge in time.

Battery power indication

Paired IPHONE mobile, it will have earphone battery power indication.

Packing list

1. RUE BUDS Bluetooth earphone 1pcs
2. USB charge cable 1pcs
3. Proudct user manual 1pcs

Product specification and parameters:

To prevent possible hearing damage, do not listen at high volume levels for long periods.

A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat Such as sunshine, fire or the like.
CAUTION
The danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type.

1. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
2. A battery is subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co‐located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no‐collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1) this device may not cause   harmful interference, and
2. (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>