STIHL HS 56 Hedge Trimmer Instruction Manual
- June 10, 2024
- STIHL
Table of Contents
HS 56 Hedge Trimmer
Product Information: STIHL HSA 56 Hedge Trimmer
The STIHL HSA 56 Hedge Trimmer is a high-quality product
designed to meet the requirements of customers. It is a reliable
tool that can be used under extreme conditions. The hedge trimmer
is equipped with a battery and charger, which enables it to be used
wirelessly. It also has a loop handle for holding, controlling, and
carrying the hedge trimmer. The cutting blades perform the cutting
action, and the handguard helps protect the hand on the loop handle
from contact with the blades. The hedge trimmer comes with a blade
scabbard that helps protect the user from contact with the cutting
blades.
Product Usage Instructions:
-
Before using the STIHL HSA 56 Hedge Trimmer, read and
understand the instruction manual carefully. -
Make sure to charge the battery fully before using it for the
first time. -
Insert the battery into the battery compartment and secure it
with the locking lever. -
Attach the blade scabbard to the cutting blades before
use. -
Hold the loop handle firmly with one hand and operate the
switch lever with the other hand to turn on the hedge trimmer. -
Use the control handle to operate and control the hedge
trimmer. -
Press and hold the trigger to start cutting, and release it to
stop. -
Always use the handguard to protect your hand from contact with
the cutting blades. -
When finished, turn off the hedge trimmer by releasing the
trigger and turning off the switch lever. -
Remove the battery from the battery compartment and store it in
a cool, dry place. -
Remove the blade scabbard and clean the cutting blades with a
soft cloth.
HSA 56
2 – 21
Instruction Manual
Translation of Original Instruction Manual 0000007377_019_GB
Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled.
English
Contents
1 Introduction…………………………………………. 2 2 Guide to Using this Manual…………………….2 3
Overview…………………………………………….. 3 4 Safety Precautions………………………………..4 5 Preparing
Hedge Trimmer for Operation.. 11 6 Charging the Battery, LEDs…………………. 11 7
Removing and Fitting the Battery…………..12 8 Switching the Hedge Trimmer
On/Off……. 12 9 Testing the Hedge Trimmer and Battery… 13 10 Operating the
Hedge Trimmer……………… 13 11 After Finishing Work…………………………….14 12
Transporting……………………………………….14 13 Storing……………………………………………….14 14
Cleaning…………………………………………….15 15 Maintenance……………………………………… 15 16
Repairing……………………………………………16 17 Troubleshooting…………………………………. 16 18
Specifications……………………………………..17 19 Spare Parts and Accessories………………..18 20
Disposal……………………………………………. 18 21 EC Declaration of Conformity………………. 18 22
UKCA Declaration of Conformity………….. 19 23 General Power Tool Safety
Warnings…….19
1 Introduction
Dear Customer,
Thank you for choosing STIHL. We develop and manufacture our quality products
to meet our customers’ requirements. The products are designed for reliability
even under extreme con- ditions.
STIHL also stands for premium service quality. Our dealers guarantee competent
advice and instruction as well as comprehensive service support.
STIHL expressly commit themselves to a sus- tainable and responsible handling
of natural resources. This user manual is intended to help you use your STIHL
product safely and in an environmentally friendly manner over a long service
life.
We thank you for your confidence in us and hope you will enjoy working with
your STIHL product.
2 Guide to Using this Manual
2.1 Applicable Documentation
Local safety regulations apply. Read, understand and save the following
documents in addition to this instruction man- ual: Safety notes and
precautions for STIHL AK
battery. Safety information for STIHL batteries and
products with built in batteries: www.stihl.com/safety-data-sheets
2.2 Warning Notices in Text
DANGER
This notice refers to risks which result in seri- ous or fatal injury. Serious
or fatal injuries can be avoided by taking the precautions mentioned.
WARNING
This notice refers to risks which can result in serious or fatal injury.
Serious or fatal injuries can be avoided by taking the precautions mentioned.
NOTICE
This notice refers to risks which can result in damage to property. Damage to
property can be avoided by tak- ing the precautions mentioned.
2.3 Symbols in Text
This symbol refers to a chapter in this instruction manual.
© ANDREAS STIHL AG & Co. KG 2022 0458-714-0121-D. VA1.F22.
Dr. Nikolas Stihl IMPORTANT! READ BEFORE USING AND KEEP IN A SAFE PLACE FOR
REFERENCE.
2
0458-714-0121-D
3 Overview
3 Overview
3.1 Hedge Trimmer, Battery and Charger
12 3
18
4
5
6
9
87
11
10
14
12 13 #
15
0000-GXX-1450-A3
16 17
1 Loop Handle For holding, controlling and carrying the hedge trimmer.
2 Switch Lever Operated together with the trigger to switch the hedge trimmer
on and off.
3 Battery Compartment Accommodates the battery.
4 Locking Lever Secures the battery in the battery compart- ment.
5 Retaining Latch Operated together with the trigger lockout to unlock the
trigger.
6 Trigger Lockout Operated together with the retaining latch to unlock the
trigger.
7 Control Handle For operating, holding and controlling the hedge trimmer.
8 Trigger Operated together with the switch lever to switch the hedge trimmer
on and off.
9 Hand Guard Helps protect hand on loop handle from con- tact with the cutting
blades.
0458-714-0121-D
English
10 Cutting Blades Perform the cutting action.
11 Charger Charges the battery.
12 LED The LED indicates the operating status of the charger.
13 Appliance Plug Connects cable to wall outlet.
14 Connecting Cable Connects charger to appliance plug.
15 Battery Supplies power to the hedge trimmer.
16 LEDs Indicate state of charge and malfunctions.
17 Button Activates the LEDs on the battery.
18 Blade scabbard Helps protect user from contact with the cut- ting blades.
Rating label with serial number
3.2 Symbols
Meanings of symbols that may be on the hedge trimmer, battery and charger:
Retaining latch unlocks the trigger in this position.
Retaining latch locks the trigger in this position.
1 LED glows red. Battery too hot or too cold.
4 LEDs flash red. There is a malfunc- tion in the battery.
LED glows green and LEDs on battery glow or flash green. Battery is being charged.
LED flashes red. No electrical contact between battery and charger or mal- function in battery or charger.
LWA
Guaranteed sound power level accord- ing to directive 2000/14/EC in dB(A) in
order to make sound emissions of
products comparable.
The data next to this symbol indicates the energy content of the battery according to the cell manufacturer’s specification. The
3
English energy content available during operation is lower. Operate the
electric appliance in a dry place, indoors only. Do not dispose of the product
with your household waste.
4 Safety Precautions
4.1 Warning Symbols
Meanings of warning signs and labels on the hedge trimmer, battery or charger:
Observe safety notices and take the necessary precautions.
Read, understand and keep the User Manual.
Wear safety glasses.
Do not touch moving cutting blades.
Remove the battery during work stop- pages, transport, storage, maintenance or
repair. Protect hedge trimmer and charger from rain and dampness.
4 Safety Precautions
The STIHL AL 101 charger is used to charge the STIHL AK battery.
WARNING
Batteries and chargers not explicitly approved for the hedge trimmer by STIHL
may cause a fire or explosion. Persons may be seriously or fatally injured,
and property may be damaged. Use the hedge trimmer with a STIHL AK battery.
Recharge the STIHL AK bat- tery with a STIHL AL 101, AL 301 or AL 500 charger.
Using the hedge trimmer, battery or the charger for purposes for which they
were not intended may result in serious or fatal injuries, and damage to
property may occur. Use the hedge trimmer, battery and charger as described in
this User Manual.
4.3 The Operator
WARNING
Users without adequate training or instruction cannot recognize or assess the
risks involved in using the hedge trimmer, battery and charger. The user or
other persons may sus- tain serious or fatal injuries. Read, understand and
save the instruction manual.
Protect battery from heat and fire.
Protect the battery from rain and mois- ture and do not immerse it in liquids.
Observe the permitted battery temper- ature range.
4.2 Intended Use
The STIHL HSA 56 hedge trimmer is designed for cutting hedges, shrubs, bushes
and under- growth. The hedge trimmer must not be used in the rain. The STIHL
AK battery supplies power to the hedge trimmer.
If you pass the hedge trimmer, battery and charger on to another person:
Always give them the instruction manual.
Make sure the user meets the following requirements: The user must be
rested.
The user must be in good physical condition and mental health to operate and
work with the hedge trimmer, battery and charger. If the user’s phys- ical,
sensory or mental ability is restricted, he or she may work only under the
supervision of or as
4
0458-714-0121-D
4 Safety Precautions
English
instructed by a responsible person.
The user is able to recognize and assess the risks involved in using the
hedge trimmer, battery and charger.
The user must be of legal age or is being trained in a trade under
supervision in accordance with national rules and regulations.
The user has received instruction from a STIHL servicing dealer or other
experienced user before working with the hedge trimmer for the first time.
The user must not be under the influ- ence of alcohol, medication or drugs.
If you have any queries: Contact a STIHL servicing dealer for assistance.
4.4 Clothing and equipment
WARNING
Long hair may be pulled into the hedge trim- mer while working. This may
result in serious injury to the user. Tie up and confine long hair above your
shoulders.
Objects can be thrown at high speed during operation. This may result in
injury to the user. Wear close-fitting safety glasses. Suitable safety glasses
are tested in accordance with EN 166 or national regulations and available
commer- cially with the corresponding mark- ing. Wear a long-sleeved, close-
fitting top and long trousers.
Dust can be whipped up during operation. Whipped up dust can damage the
respiratory passages and cause allergic reactions. If dust is generated: Wear
a dust respirator mask.
Unsuitable clothing can snag on wood or scrub and may become caught in the
hedge trimmer. Users not wearing suitable clothing are at risk of serious
injury. Wear close-fitting clothing.
Remove scarves and jewelry. The user may come into contact with the mov-
ing cutting blades while working. This may result in serious injury to the
user. Wear robust footwear. Wear long trousers made from resistant
material. The user may come into contact with the cut-
ting blades during cleaning or servicing. This may result in injury to the
user. Wear work gloves made from resistant
material. Wearing unsuitable footwear may cause the
user to slip. This may result in injury to the user. Wear sturdy, closed-toed
footwear with
high-grip soles.
4.5 Work Area and Surroundings
4.5.1 Hedge Trimmer
WARNING
Bystanders, children and animals cannot rec- ognize or assess the dangers of
the hedge trimmer or flying debris. Innocent bystanders, children and animals
may be seriously injured and damage to property may occur. Keep bystanders,
children and animals away from the work area. Do not leave the hedge trimmer
unatten- ded. Make sure that children cannot play with the hedge trimmer.
The hedge trimmer is not waterproof. Working in the rain or a damp location
may result in an electric shock. This can result in injuries to the user and
may damage the hedge trimmer. Do not work in the rain or a damp location.
Electrical components of the hedge trimmer can produce sparks. Sparks may
cause a fire or an explosion in an easily combustible or explosive
environment. This can result in seri- ous or fatal injuries and damage to
property. Do not work in an easily combustible or explosive environment.
4.5.2 Battery
WARNING
Bystanders, children and animals cannot rec- ognize or assess the dangers of
the battery. Bystanders, children and animals may be seri- ously injured.
0458-714-0121-D
5
English
4 Safety Precautions
Keep bystanders, children and animals away from the work area.
Do not leave the battery unattended. Make sure that children cannot play with
the battery. The battery is not protected against all ambi-
ent conditions. If the battery is exposed to cer- tain ambient conditions, the
battery may catch fire, explode or be irreparably damaged. This may result in
serious injury to people and damage to property.
Protect battery from heat and fire. Do not throw the battery into a fire.
Do not operate the charger in a flammable environment or in an explosive
environ- ment.
Do not operate the charger on a readily combustible surface.
Use and store the charger at temperatures between + 5 °C and + 40 °C.
The connecting cable is a trip hazard. People may be injured and the charger
may be dam- aged. Lay the connecting cable flat on the floor.
4.6 Safe Condition
4.6.1 Hedge trimmer
Use and store the battery at temper- atures between 10 °C and + 50 °C.
The hedge trimmer is in a safe condition if the following conditions are fulfilled:
The hedge trimmer is undamaged.
Hedge trimmer is clean and dry.
Protect the battery from rain and
The controls function properly and have not
moisture and do not immerse it in liq- been modified.
uids.
The cutting blades are correctly fitted.
Keep battery away from small metal parts.
Only an original STIHL accessory for this hedge trimmer has been fitted.
Do not expose the battery to high pressure. Do not expose the battery to microwaves. Protect the battery from chemicals and
The accessories are correctly attached.
WARNING
salts.
If not in safe condition, components may no
4.5.3 Charger
WARNING
longer operate correctly and safety devices may be disabled. This may result in serous or fatal injury to people.
Bystanders, children and animals are not aware of and cannot assess the
dangers of a charger or electric current. Bystanders, chil- dren and animals
may be seriously or fatally injured. Keep bystanders, children and animals
away from the work area.
Make sure that children can-
Never use a damaged hedge trimmer. If the hedge trimmer is dirty or wet: Clean
the hedge trimmer and allow it to dry. Do not modify the hedge trimmer. If the
controls do not work: Do not operate
the hedge trimmer. Only fit original STIHL accessories for this
hedge trimmer. Attach accessories as described in this
not play with the charger.
The charger is not waterproof. If you work in the rain or in a damp
environment, an electric shock may occur. The user may be injured and the
charger may be damaged.
Do not operate it in the rain or in a damp environment.
User Manual or in the User Manual for the accessories. Do not insert objects into the openings in the hedge trimmer. Replace worn or damaged labels. If you have any doubts, be sure to consult a STIHL dealer.
The charger is not protected against all ambi- ent conditions. If the charger is exposed to certain ambient conditions, it may catch fire or explode. This may result in serious injury to people and damage to property. Operate the charger in an enclosed, dry room.
4.6.2 Cutting Blades
The cutting blades are in a safe condition if the
following points are observed:
Cutting blades are undamaged. Cutting blades are not deformed. Cutting
blades move freely. Cutting blades are properly sharpened. Cutting blades
have no burrs.
6
0458-714-0121-D
4 Safety Precautions
WARNING
If they are in an unsafe condition, parts of the cutting blades may come off
and be thrown at high speed. This can result in serious injuries. Work only
with undamaged cutting blades. Make sure the cutting blades are properly
sharpened and deburred. If you have any queries: Contact your STIHL servicing
dealer.
4.6.3 Battery The battery is in safe condition when the follow- ing conditions
are met: The battery is not damaged. The battery is clean and dry. The
battery is working and has not been modi-
fied.
WARNING
The battery cannot function safely if it is not in safe condition. There is a
risk of serious injury to persons. Use an undamaged and functioning battery.
Do not charge a damaged or defective bat- tery. If the battery is dirty or
wet: clean the bat- tery and allow it to dry. Do not modify the battery. Do
not insert objects into the apertures in the battery. Never connect the
battery terminals to met- allic objects and cause a short circuit. Do not open
the battery. Replace worn or damaged warning signs.
Fluid may leak from a damaged battery. If the fluid contacts the skin or eyes,
this may cause irritation. Avoid contact with the fluid. In the event of
contact with the skin: wash the affected areas with plenty of soap and water.
In the event of contact with the eyes: rinse the eyes with plenty of water for
at least 15 minutes and seek medical attention.
A damaged or defective battery may emit an unusual odour, smoke or catch fire.
This may result in serious or fatal injury to people and damage to property.
If the battery emits an unusual odour or smoke: do not use the battery and
keep it away from flammable materials. If the battery catches fire: try to
extinguish the battery using a fire extinguisher or water.
English
4.6.4 Charger The charger is in a safe condition if the following points are
observed: Charger is undamaged. Charger is clean and dry.
WARNING
If components do not comply with safety requirements, they will no longer
function properly and safety devices may be rendered inoperative. This can
result in serious or fatal injuries. Do not use a damaged charger. If the
charger is dirty or wet: Clean the charger and allow it to dry. Never attempt
to modify the charger. Never insert objects in the charger’s open- ings. Never
bridge the charger’s contacts with metallic objects (short circuit). Do not
open the charger.
4.7 Operation
WARNING
The user cannot concentrate on the work in certain situations. The user may
stumble, fall and be seriously injured. Work calmly and carefully. If light
and visibility are poor: Do not use your hedge trimmer. Operate the hedge
trimmer alone. Watch out for obstacles. Stand on the ground while working and
keep a good balance. If it is necessary to work at heights: Use a lift bucket
or a safe platform. If you begin to feel tired: Take a break.
Working above shoulder height can cause you to tire quickly. This can result
in serious inju- ries. Work above shoulder height for short peri- ods only.
Take regular breaks.
If the moving cutting blades make contact with a hard object they can be
brought to a sudden stop. The reactive forces that occur can cause the user to
lose control of the hedge trimmer and be seriously injured. Hold the hedge
trimmer firmly with both hands. Before starting work, check hedge for hard
objects and remove any such objects.
The moving cutting blades can cut the user. This can result in serious
injuries.
0458-714-0121-D
7
English
4 Safety Precautions
Do not touch moving cutting blades. If the cutting blades are blocked by
DANGER
an object: Switch off the hedge trim- Contact with live parts may result in electric
mer and remove the battery. Then remove the object causing the block- age.
If the behavior of the hedge trimmer changes during operation or feels
unusual, it may no longer be in a safe condition. This can result in serious
injuries and damage to property. Stop work, remove the battery and contact
shock. This may result in serious or fatal injury to the user. Make sure that
the connecting cable, exten-
sion cord and their mains plugs are undam- aged.
If the connecting cable or the extension cord is damaged: Do not touch the
damaged area.
your STIHL servicing dealer for assistance.
Disconnect the mains plug from the
Hedge trimmer vibrations may occur during
power supply.
operation.
Make sure your hands are dry before touch-
Wear gloves.
ing the connecting cable, extension cord or
Take regular breaks.
mains plugs.
If signs of circulation problems occur: Seek
Plug the mains plug of the connecting cable
medical advice.
or extension cord into a properly installed,
Note that the cutting blades continue to run for
shockproof socket with the correct fuse rat-
about 1 second after you release the trigger.
ing.
The moving cutting blades can cut the user.
Install the charger with a ground fault circuit
This can result in serious injuries.
interrupter (30 mA, 30 ms).
Hold the hedge trimmer firmly by the control A damaged or unsuitable extension cable can
handle and loop handle and wait until the
result in electric shock. There is a risk of seri-
cutting blades come to a complete stand-
ous or fatal injury.
still.
Use an extension cable with the correct
DANGER
Working near live electric cables can result in
cable cross-section, 18.5.
WARNING
accidental contact with the cutting blades and Overvoltage can occur in the charger if the line
damage the cables. This can result in serious
voltage or frequency are incorrect during
or fatal injuries.
charging. The charger may be damaged.
Do not work near live electric cables.
Make sure that the mains voltage and the
4.8 Charging
mains frequency of the power supply match the data on the rating plate of the charger.
WARNING
If the charger is connected to a power strip, electrical components may be overloaded dur-
A damaged or defective charger may produce
ing the charging process. The components
an unusual smell or emit smoke during the
may overheat and cause a fire. Persons may
charging process. This may result in personal
be seriously or fatally injured, and property
injuries and damage to property.
may be damaged.
Disconnect the plug from the wall outlet.
Ensure that the technical specifications for
The charger can overheat and cause a fire if
the power strip are not exceeded by the
heat dissipation is inadequate. This can result
information on the rating plate of the
in serious or fatal injuries and damage to prop-
charger and of all electrical devices connec-
erty.
ted to the power strip.
Do not cover the charger.
An incorrectly routed connecting cable or
4.9 Connecting to the power supply
Contact with live components may occur for the following reasons: The
connecting cable or the extension cord is
damaged. The mains plug of the connecting cable or
extension cord is damaged.
extension cord may be damaged, and people may trip over it. People may be
injured, and the connecting cable or extension cord may be damaged. Route and
mark the connecting cable and
extension cord so that people will not trip over them.
The socket is not properly installed.
8
0458-714-0121-D
4 Safety Precautions
Route the connecting cable and extension cord so that they are not under
tension or tangled.
Route the connecting cable and extension cord so that they will not be
damaged, kinked or crushed and will not be chafed.
Protect the connecting cable and extension cord from heat, oil and chemicals.
Lay the connecting cable and extension cord on a dry surface.
The extension cable warms up in operation. If that heat cannot escape, it may
cause a fire. If using a cable reel: completely unroll the cable reel.
If wiring and pipes are laid in the wall, they may be damaged if the charger
is mounted on the wall. Contact with wiring can result in elec- tric shock.
This may result in serious injury to people and damage to property. Make sure
there is no wiring or pipes in the wall at the proposed mounting site.
If the charger is not mounted on the wall as described in this User Manual,
the charger or the battery may fall or the charger may over- heat. This may
result in injury to people and damage to property. Mount the charger on a wall
as described in this User Manual.
If the charger is mounted on a wall with the battery inserted, the battery may
fall out of the charger. This may result in injury to people and damage to
property. Mount the charger on the wall first before inserting the battery.
4.10 Transporting
4.10.1 Hedge Trimmer
WARNING
The hedge trimmer may turn over or shift dur- ing transport. This may result
in personal inju- ries and damage to property. Push the retaining latch into
position . Remove the battery.
Fit the blade scabbard so that it completely covers the cutting blades.
Secure the hedge trimmer with lashing straps or a net to prevent it turning
over and moving.
English
4.10.2 Battery
WARNING
The battery is not protected against all ambi- ent conditions. The battery may
be damaged if it is exposed to certain ambient conditions, and damage to
property may occur. Never transport a damaged battery.
The battery may turn over or shift during trans- port. This may result in
injury to people and damage to property. Pack the battery in packaging in such
a way that it cannot move. Secure the packaging so that it cannot move.
4.10.3 Charger
WARNING
The charger may turn over or move while being transported. This may result in
personal injuries and damage to property. Disconnect the plug from the wall
outlet. Remove the battery. Secure the charger with lashing straps, belts or a
net to prevent it turning over and moving.
The connecting cable must not be used for carrying the charger. The connecting
cable and the charger may be damaged. Wind up the connecting cable and attach
it to the charger.
4.11 Storing
4.11.1 Hedge Trimmer
WARNING
Children are not aware of and cannot assess the dangers of a hedge trimmer and
can be seriously injured. Push the retaining latch into position . Remove the
battery.
Fit the blade scabbard so that it completely covers the cutting blades.
Store the hedge trimmer out of the reach of children.
Dampness can corrode the electrical contacts on the trimmer and metal
components. This can damage the hedge trimmer. Push the retaining latch into
position .
0458-714-0121-D
9
English
Remove the battery.
Store the hedge trimmer in a clean and dry condition.
4.11.2 Battery
WARNING
Children are not aware of and cannot assess the dangers of the battery
Children may be seriously injured. Store the battery out of the reach of chil-
dren.
The battery is not protected against all ambi- ent conditions. If the battery
is exposed to cer- tain ambient conditions, the battery may be irreparably
damaged. Store the battery in a clean and dry condi- tion. Store the battery
in an enclosed space. Store the battery separately from the hedge trimmer. If
the battery is stored in the charger, dis- connect the mains plug and store
the bat- tery at a state of charge between 40% and 60% (2 lit green LEDs).
Store the battery at a temperature range between – 10 °C and + 50 °C.
4.11.3 Charger
WARNING
Children are not aware of and cannot assess the dangers of a charger. Children
can be seri- ously injured or killed. Disconnect the mains plug from the wall
outlet. Store the charger out of reach of children.
The charger is not protected against all ambi- ent conditions. If the charger
is exposed to certain ambient conditions, the charger may be damaged.
Disconnect the mains plug from the wall outlet. If the charger is hot: Allow
charger to cool down. Store the charger in a clean, dry place. Store the
charger in an enclosed room. Store the charger at temperatures between + 5 °C
and + 40 °C.
The connecting cable should not be used for carrying the charger or hanging up
the charger. The connecting cable and the charger may be damaged.
4 Safety Precautions
Hold the charger by the housing in a secure grip. The charger is provided with
a handle recess to make it easy to pick up the charger.
Hang the charger on the wall mounting.
4.12 Cleaning, Maintenance and Repair
WARNING
The hedge trimmer may start unintentionally if the battery is left in place
during cleaning, maintenance or repair operations. This may result in serious
injury to people and damage to property. Move the retaining latch to the
position. Remove the battery.
Sharp cleaning agents, cleaning with a water jet or pointed objects can damage
the hedge trimmer, the cutting blades, the battery or the charger. If the
hedge trimmer, cutting blades, battery or charger are not cleaned correctly,
components may no longer function properly or safety devices may be rendered
inopera- tive. They may cause serious injury to per- sons. Clean the hedge
trimmer, cutting blades, battery and charger as described in this instruction
manual.
If the hedge trimmer, cutting blades, battery or charger are not serviced
correctly, compo- nents may no longer function properly or safety devices may
be rendered inoperative. This may result in serous or fatal injury to peo-
ple. Do not attempt to service or repair the hedge trimmer, battery or
charger. If the hedge trimmer, battery or the charger require servicing or
repairs: Contact your STIHL servicing dealer for assistance. Maintain the
cutting blades as described in this User Manual.
The user can be cut by the sharp cutting edges while cleaning or servicing the
cutting blades. This may result in injury to the user. Wear work gloves made
from resistant material.
10
0458-714-0121-D
5 Preparing Hedge Trimmer for Operation
5 Preparing Hedge Trimmer for Operation
5.1 Preparing Hedge Trimmer for Operation
The following steps must be performed before commencing work: Ensure that the
following components are in
safe condition: Hedge trimmer, 4.6.1. Cutting blades, 4.6.2. Battery,
4.6.3. Charger, 4.6.4. Check the battery, 9.2. Fully charge the battery,
6.2. Clean the hedge trimmer, 14.1. Check the controls, 9.1. If you cannot
carry out this work: Do not use your hedge trimmer and contact your STIHL
servicing dealer.
6 Charging the Battery, LEDs
6.1 Mounting the Charger on a Wall
The charger can be mounted on a wall.
1
2
3
a b
d
e
a
e
Check the following points
when mounting the charger on
a wall:
Suitable fixing materials. The charger is level.
The following dimensions are observed: a = at least 100 mm b (for AL 101)
= 75 mm b (for AL 301) = 100 mm b (for AL 500) = 120 mm c = 4.5 mm d =
9 mm e = 2.5 mm
0000099636_001 0000-GXX-0628-A0
English
6.2 Charging the Battery
The charging time depends on several factors, e.g. temperature of the battery
or the ambient temperature. The actual charging time may differ from the
specified charging time. For specified charging times see
www.stihl.com/chargingtimes.
The charging process starts automatically when the plug is inserted in a wall
outlet and the battery is fitted in the charger. The charger switches itself
off automatically when the battery is fully charged.
The battery and charger become hot during the charging process.
3
7 6 2
4
5
1
Insert the plug (6) in a convenient wall outlet (7). The charger (3) runs a
self test. The LED (4) glows green for about 1 second and then red for about 1
second.
Fit the connecting cable (5). Insert the battery (2) in the guides in the
charger (3) and press it home as far as stop. The LED (4) glows green. The
LEDs (1) glow green and the battery (2) is being charged. If the LED (4) and
the LEDs (1) stop glowing: The battery (2) is fully charged and can be taken
out of the charger (3). If the charger (3) is no longer required. Dis- connect
the plug (6) from the wall outlet (7).
0458-714-0121-D
11
English
6.3 State of Charge
80-100% 60-80% 40-60% 20-40%
0-20%
1
Press the button (1). The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
If the LED on the right flashes green: Charge the battery.
6.4 LEDs on Battery
The LEDs can show the state of charge or mal- functions. The LEDs can glow or
flash green or red.
The state of charge is indicated when the LEDs glow or flash green. If the
LEDs glow or flash red: Troubleshooting,
17. There is a malfunction in hedge trimmer or battery.
6.5 LED on Charger
The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged. If the LED flashes red:
Rectify the malfunction.
Malfunction in charger.
7 Removing and Fitting the Battery
7.1 Inserting the Battery
1
0000-GXX-0629-A0 0000080237_002
7 Removing and Fitting the Battery
The arrows (3) on the battery (1) are still visi- ble and the battery (1) is
held securely in the battery compartment (2). There is no electrical contact
between the hedge trimmer and bat- tery (1). Insert the battery (1) into the
battery compart- ment (2) as far as it will go. The battery (1) engages with a
second click and is flush with the hedge trimmer’s housing.
7.2 Removing the Battery
Place the hedge trimmer on a level surface.
2
1
Depress the locking lever (1). The battery (2) is unlocked and can be removed.
8 Switching the Hedge Trim- mer On/Off
8.1 Switching On
WARNING The motor accelerates and the cutting blades
run regardless of the sequence in which the switch lever and trigger are
depressed. If you depress the trigger first and then the switch lever, you may
lose control of the hedge trim- mer. This can result in serious injuries.
Depress the switch lever first and then the
trigger.
1
3 2
Insert the battery (1) in the battery compart- ment (2) and press it home
until you hear a click.
0000080236_002 0000-GXX-1454-A0
2 3
4
Depress the switch lever (1) and hold it in that position.
Push the retaining latch (2) with your thumb to position .
12
0458-714-0121-D
9 Testing the Hedge Trimmer and Battery
Depress the trigger lockout (3) with your hand and hold it there.
Pull the trigger (4) with your index finger and hold it there. The motor
accelerates and the cutting blades run.
8.2 Switching Off
Release the switch lever, trigger and lockout lever.
Wait until the cutting blades come to a com- plete standstill after about 1
second.
If the cutting blades continue to run after about 1 second: Remove the battery
and contact your STIHL servicing dealer. Your hedge trimmer has a malfunction.
Push the retaining latch into position .
9 Testing the Hedge Trimmer and Battery
9.1 Checking the Controls
Retaining latch, trigger lockout and trigger Remove the battery. Push the
retaining latch into position . Attempt to pull the trigger without depressing
the lockout lever. If the trigger can be pulled: Do not use your
hedge trimmer and contact your STIHL servic- ing dealer. Retaining latch or
trigger lockout is faulty. Push the retaining latch into position . Depress
the trigger lockout lever and hold it in that position. Pull the trigger.
Release the trigger and trigger lockout lever. If the trigger or trigger
lockout is stiff or does not spring back to the idle position: Do not use your
hedge trimmer and contact your STIHL servicing dealer. Trigger or trigger
lockout is faulty.
Switch Lever Remove the battery. Depress the switch lever and release it
again. If the switch lever is stiff or does not spring
back to its idle position: Do not use your hedge trimmer and contact your
STIHL servic- ing dealer. The switch lever has a malfunction.
Switch on the hedge trimmer Fit the battery. Depress the switch lever and
release it again.
English
If the cutting blades have run or are running: Do not use your hedge trimmer
and contact your STIHL servicing dealer. The trigger has a malfunction.
Depress the trigger lockout lever and hold it in that position.
Pull the trigger and hold it there. If the cutting blades run: Do not use your
hedge trimmer and contact your STIHL servic- ing dealer. The switch lever has
a malfunction. Depress the switch lever and hold it in that position. The
cutting blades run. If 3 LEDs flash red: Remove the battery and contact your
STIHL servicing dealer. There is a malfunction in the hedge trimmer. Release
the switch lever. The cutting blades stop running after about 1 second. If the
cutting blades continue to run after 1 second: Remove the battery and contact
your STIHL servicing dealer. Your hedge trimmer has a malfunction.
9.2 Testing the Battery
Press button on battery. The LEDs glow or flash.
If the LEDs do not glow or flash: Do not use the battery and contact your
STIHL servicing dealer. There is a malfunction in the battery.
10 Operating the Hedge Trim- mer
10.1 Holding and Controlling the Hedge Trimmer
Hold the hedge trimmer with one hand on the control handle wrap your thumb
around the control handle.
Hold the hedge trimmer with the other hand on the loop handle wrap your
thumb around the loop handle.
0000-GXX-1455-A0
0458-714-0121-D
13
English
10.2 Cutting
Use lopping shears or a chainsaw to cut out thick branches first.
0-10°
Swing the hedge trimmer from the bottom upwards in an arc while making the
cut.
Lower the nose of the hedge trimmer without cutting.
Walk slowly and steadily forwards. Swing the hedge trimmer from the bottom
upwards in an arc while making the cut. Cut the other side of the hedge in the
same
way. Hold the cutting blades at an angle of 0° to 10°
to the top of the hedge. Swing the hedge trimmer horizontally and in
an arc while making the cut. If cutting performance deteriorates: Sharpen
the cutting blades.
11 After Finishing Work
11.1 After Finishing Work
Switch off the hedge trimmer, push retaining latch to position and remove the
battery.
If the hedge trimmer is wet: Allow the hedge trimmer to dry.
If the battery is wet: Allow the battery to dry. Clean the hedge trimmer.
Clean the cutting blades. Fit the blade scabbard so that it completely
covers the cutting blades. Clean the battery.
12 Transporting
12.1 Transporting the Hedge Trim- mer
Switch off the hedge trimmer, push retaining latch to position and remove the
battery.
Fit the blade scabbard so that it completely covers the cutting blades.
Carrying the hedge trimmer Carry the hedge trimmer by the loop handle
with the cutting blades behind you.
0000-GXX-1456-A0
11 After Finishing Work
Transporting the Hedge Trimmer in a vehicle Secure the hedge trimmer to
prevent turnover
and movement.
12.2 Transporting the Battery
Switch off the hedge trimmer, push retaining
latch to position and remove the battery. Check that the battery is in a safe
condition. Pack the battery in packaging in such a way
that it cannot move inside the packaging. Secure the packaging so that it
cannot move.
The battery is subject to the Carriage of Danger- ous Goods regulations. The
battery is classified as UN 3480 (lithium ion batteries) and has been tested
pursuant to UN Manual Tests and Criteria Part III, Subsection 38.3.
The transport regulations can be found at www.stihl.com/safety-data-sheets.
12.3 Transporting the Charger
Disconnect the plug from the wall outlet. Remove the battery. Wind up the
connecting cable and attach it to
the charger. Transporting the charger in a vehicle: Secure
the charger with lashing straps, belts or a net to prevent it turning over and
moving.
13 Storing
13.1 Storing the Hedge Trimmer
Switch off the hedge trimmer, push retaining
latch to position and remove the battery. Fit the blade scabbard so that it
completely
covers the cutting blades. Observe the following points when storing the
hedge trimmer: Hedge trimmer is out of the reach of chil-
dren. Hedge trimmer is clean and dry.
13.2 Storing the Battery
STIHL recommends keeping the battery in a charging state between 40% and 60 %
(2 green LEDs lit).
14
0458-714-0121-D
14 Cleaning
The battery should be stored in such a way that the following conditions are
fulfilled: The battery is out of the reach of children. The battery is
clean and dry. The battery is in an enclosed space. The battery is
separated fron the hedge trimmer. If the battery is stored in the charger,
dis- connect the mains plug and store the bat- tery at a state of charge
between 40% and 60% (2 lit green LEDs). The battery is in a temperature
range between – 10 °C and + 50 °C.
NOTICE
If the battery is not stored as described in this user manual, the battery may
become deeply discharged and irreparably damaged. Charge a discharged battery
before storing it. STIHL recommends keeping the battery state of charge
between 40% and 60% (2 lit green LEDs). Store the battery separately from the
hedge trimmer.
13.3 Storing the Charger
Disconnect the mains plug from the power supply.
1
2
3
0000-GXX-0592-A1
Wind up the connecting cable and attach it to the charger.
Observe the following points when storing the charger: Charger is out of the
reach of children. The charger is clean and dry. The charger is in an
enclosed space. The charger is not suspended from the con- necting cable or
the holder (3) for the con- necting cable. The charger is in a temperature
range between + 5°C and + 40°C.
English
14 Cleaning
14.1 Cleaning the Hedge Trimmer
Switch off the hedge trimmer, push retaining
latch to position and remove the battery. Clean the hedge trimmer with a damp
cloth or
STIHL resin solvent. Clean vents with a paintbrush. Remove foreign objects
from the battery com-
partment and clean the battery compartment with a damp cloth. Clean the
electrical contacts in the battery compartment with a paintbrush or soft
brush.
14.2 Cleaning the Cutting Blades
Switch off the hedge trimmer, push retaining
latch to position and remove the battery. Spray both sides of blades with
STIHL resin
solvent. Fit the battery. Run the hedge trimmer for 5 seconds, .
The cutting blades run. STIHL resin solvent is distributed evenly.
14.3 Cleaning the Battery
Clean the battery with a damp cloth.
14.4 Cleaning the Charger
Disconnect the mains plug from the power supply.
Clean the charger with a damp cloth. Clean vents with a paintbrush. Clean the
charger’s electrical contacts with a
paintbrush or a soft brush.
15 Maintenance
15.1 Maintenance intervals
Maintenance intervals depend on the ambient conditions and the operating
conditions. STIHL recommends the following maintenance inter- vals:
After every 50 hours of operation Have the gearbox lubricated by a STIHL
dealer.
15.2 Sharpening the cutting blade
STIHL recommends you have the cutting blades resharpened by a STIHL dealer.
0458-714-0121-D
15
English
16 Repairing
WARNING
The teeth of the cutting blades are very sharp. This may result in the user
cutting themselves. Wear work gloves made from resistant material.
Switch off the hedge trimmer, push retaining
latch to position and remove the battery.
Use a damp cloth to remove the filing dust. Spray both sides of cutting blades
with STIHL
resin solvent. Run the hedge trimmer for 5 seconds.
The cutting blades run. STIHL resin solvent is distributed evenly. If you have
any doubts, be sure to consult a STIHL dealer.
16 Repairing
16.1 Repairing Hedge Trimmer, Bat- tery and Charger
Use a STIHL flat file to sharpen each cutting edge on the upper blade. The
file only sharp- ens on the forward stroke. Maintain the pre- scribed
sharpening angle, 18.2.
Turn the hedge trimmer over. Sharpen the remaining cutting edges. Deburr each
cutting edge from below. Turn the hedge trimmer over. Deburr the remaining
cutting edges.
17 Troubleshooting
0000-GXX-1426-A0
The hedge trimmer, cutting blades, battery and charger are not user
serviceable. If the hedge trimmer or cutting blades are
damaged: Do not use your hedge trimmer and contact your STIHL servicing
dealer. If the battery has a malfunction or is damaged: Replace the battery.
If the charger has a malfunction or is dam- aged: Replace the charger. If the
connecting cable has a malfunction or is damaged: Do not use the charger and
have connecting cable replaced by a STIHL servic- ing dealer.
17.1 Troubleshooting Hedge Trimmer or Battery
Fault Hedge trimmer does not start when switched on.
LEDs on the Cause battery
Remedy
1 LED flashing State of charge of the Charge the battery.
green.
battery is too low.
1 LED emits red light. 3 LEDs flash red.
3 LEDs light up red. 4 LEDs flash- ing red.
The battery is too warm or too cold.
Remove the battery. Allow the battery to cool down or warm
up.
There is a malfunction Remove the battery. in the hedge trimmer. Clean
electrical contacts in the battery
compartment. Insert battery. Switch on the hedge trimmer. If 3 LEDs continue
to flash red: Do not
use your hedge trimmer and contact your STIHL servicing dealer for assistance.
The cutting blades do Spray both sides of cutting blades with
not run freely.
STIHL resin solvent.
If 3 LEDs continue to flash red: Do not
use your hedge trimmer and contact your
STIHL servicing dealer for assistance.
Hedge trimmer is too Remove the battery.
hot.
Allow the hedge trimmer to cool down.
There is a fault in the Remove battery and reinsert it.
battery.
Switch on the hedge trimmer.
16
0458-714-0121-D
18 Specifications
English
Fault
LEDs on the battery
–
–
Hedge trimmer cuts out during operation.
3 LEDs light up red. –
Hedge trimmer’s running time is too short.
–
Charging does not start when the battery is inserted into the charger.
1 LED emits red light.
Cause
Remedy
If 4 LEDs continue to flash red: Do not use the battery; contact a STIHL author- ized dealer.
No electrical contact between the hedge trimmer and battery.
Remove the battery. Clean electrical contacts in the battery
compartment. Insert battery.
Hedge trimmer or bat- Allow hedge trimmer or battery to dry. tery is damp.
Hedge trimmer is too Remove the battery.
hot.
Allow the hedge trimmer to cool down.
There is an electrical Remove battery and reinsert it.
fault.
Switch on the hedge trimmer.
The battery is not fully Fully charge the battery. charged.
The battery life has been exceeded. The battery is too warm or too cold.
Replace battery. Leave battery inserted in charger.
Charging starts automatically as soon as the permitted temperature range is
reached.
17.2 Troubleshooting the Charger
Fault
LED on Charger
Battery not being The LED
charged.
flashes red.
Cause
Remedy
No electrical contact Remove the battery.
between charger and Clean contacts on charger.
battery.
Insert battery.
There is a malfunction Do not use the charger and contact your
in the charger.
STIHL dealer for assistance.
18 Specifications
18.1 STIHL HSA 56 Hedge Trimmer
Approved battery: STIHL AK Weight without battery: 2.9 kg
For battery life see www.stihl.com/battery-life.
18.2 Cutting Blades
Tooth spacing: 30 mm Cutting length: 450 mm Sharpening angle: 35°
18.4 Charger STIHL AL 101
Rated voltage: see rating plate Frequency: see rating plate Rated power:
see rating plate Charging current: see rating plate Permissible
temperature range for use and
storage: + 5 °C to + 40 °C
The charging times are indicated at www.stihl.com/charging-times.
18.5 Extension Cords
18.3 STIHL AK Battery
Battery technology: Lithium-ion Voltage: 36 V Capacity in Ah: see rating
label Energy content in Wh: see rating label Weight in kg: see rating
label Permissible temperature range for operation
and storage: -10°C to +50°C
If an extension cord is used, the cross sectional area of its conductors must
meet the following minimum requirements depending on the line voltage and
length of the extension cord:
If rated voltage on the rating label is 220V to 240V: Cord length up to 20
m: AWG 15 / 1.5 mm²
0458-714-0121-D
17
English
Cord length 20 m up to 50 m: AWG 13 / 2.5 mm²
If rated voltage on the rating label is 100V to 127V: Cord length up to 10
m: AWG 14 / 2.0 mm² Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
18.6 Sound Values and Vibration Values
The K-value for sound pressure levels is 2 dB(A). K-value for sound power
levels is 2 dB(A). Kvalue for vibration level is 2 m/s².
STIHL recommends wearing ear defenders. Sound pressure level Lp measured
according
to EN 60745-2-15: 80 dB(A). Sound power level LwA measured according to
EN 60745-2-15: 91 dB(A). Vibration level ahv measured as specified in
EN 60745-2-15 Control handle: 2.7 m/s². The K value for
the vibration level is 2 m/s². Loop handle: 1.2 m/s².
The vibration levels indicated were measured according to a standardized test
method and can be used as a basis for comparing electric power tools. The
vibration levels actually occurring may vary from the values indicated,
depending on the type of application. The vibration levels indicated can be
used for an initial estimate of the vibration stress. The actual vibration
stress has to be esti- mated. The times when the electric power tool is
switched off and the times when it is switched on but running under no load
can be taken into account in the estimate.
For information on compliance with Employers’ Vibration Directive 2002/44/EC
see www.stihl.com/vib.
18.7 REACH
REACH is an EC regulation and stands for the Registration, Evaluation,
Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation see
www.stihl.com/reach.
19 Spare Parts and Accessories
19 Spare Parts and Accesso- ries
19.1
Spare parts and accessories
These symbols indicate original STIHL spare parts and original STIHL acces-
sories.
STIHL recommends the use of original STIHL spare parts and accessories.
Despite ongoing market observation, STIHL is unable to judge the reliability,
safety and suitabil- ity of other manufacturers’ spare parts and accessories;
accordingly, STIHL cannot warrant for the use of those parts.
Original STIHL spare parts and original STIHL accessories are available from
STIHL dealers.
20 Disposal
20.1 Disposal of Hedge Trimmer, Battery and Charger
Contact the local authorities or your STIHL dealer for information on
disposal.
Improper disposal can be harmful to health and pollute the environment. Take
STIHL products including packaging to a
suitable collection point for recycling in accord- ance with local
regulations. Do not dispose with domestic waste.
21 EC Declaration of Con- formity
21.1 STIHL HSA 56 Hedge Trimmer
ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen
Germany
declares under our sole responsibility that Category: Cordless hedge trimmer
Manufacturer’s brand: STIHL Model: HSA 56 Serial number: 4521
conforms to the relevant provisions of Directives 2011/65/EU, 2006/42/EC,
2014/30/EU and 2000/14/EC and has been developed and manu- factured in
compliance with the following stand- ards in the versions valid on the date of
produc- tion: EN 55014-1, EN 55014-2, EN 60745-1 and EN 60745-2-15.
18
0458-714-0121-D
22 UKCA Declaration of Conformity
Applied conformity assessment procedure in accordance with Directive
2000/14/EC, Annex V. Measured sound power level: 91 dB(A) Guaranteed sound
power level: 93 dB(A)
The technical documents are stored at ANDREAS STIHL AG & Co. KG Produktzulas-
sung.
The year of manufacture, country of manufacture and serial number are applied
to the pruning shears.
Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
English
in the Environment by Equipment for use Out- doors Regulations 2001 Schedule
8. Measured sound power level: 91 dB(A) Guaranteed sound power level: 93
dB(A)
The technical documents are stored at ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture and serial number are applied
to the pruning shears.
Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica- tion & Regulatory Affairs
22 UKCA Declaration of Con- formity
22.1 STIHL HSA 56 Hedge Trimmer
ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen
Germany
declares under our sole responsibility that Category: Cordless hedge trimmer
Manufacturer’s brand: STIHL Model: HSA 56 Serial number: 4521 conforms
to the relevant provisions of UK regula- tions The Restriction of the Use of
Certain Haz- ardous Substances in Electrical and Electronic Equipment
Regulations 2012, Supply of Machi- nery (Safety) Regulations 2008,
Electromagnetic Compatibility Regulations 2016 and Noise Emis- sion in the
Environment by Equipment for use Outdoors Regulations 2001 and has been manu-
factured in compliance with the following stand- ards in the versions valid on
the date of produc- tion: EN 55014-1, EN 55014-2, EN 60745-1, and EN
60745-2-15.
Applied conformity assessment procedure in accordance with UK regulations
Noise Emission
0458-714-0121-D
pp
Dr. Jürgen Hoffmann, Director Product Certifica- tion & Regulatory Affairs
23 General Power Tool Safety Warnings
23.1 Introduction
This chapter reproduces the pre-formulated, gen- eral safety precautions
specified in the IEC 62841 standard for hand-held motor-oper- ated electric
tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric shock given under
“Electrical Safety” do not apply to STIHL cordless products.
WARNING
Read all safety warnings, instructions, illustra- tions and specifications
provided with this power tool. Failure to follow all instructions lis- ted
below may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term “electric power tool” in the safety warn- ings refers to mains-
operated (corded) power tools or battery-operated (cordless) power tools.
23.2 Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power
19
English
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
23.3 Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (groun- ded) power tools.Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entan- gled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
23.4 Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or carrying
the tool. Carrying power tools
20
23 General Power Tool Safety Warnings
with your finger on the switch or energising power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better con- trol of the power tool in unexpected situa- tions.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facillities, ensure these are connected and properly used. Use of
dust collection can reduce dustrelated hazards.
h) Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action can
cause severe injury within a frac- tion of a second.
23.5 Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dan- gerous and must
be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack,
if detacha- ble, from the power tool before making any adjustments, changing
accessories, or stor- ing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dan- gerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condi- tion that may affect the
power tool’s opera- tion. If damaged, have the power tool
0458-714-0121-D
23 General Power Tool Safety Warnings
repaired before use. Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situa- tion.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
23.6 Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically desig- nated battery packs. Use of
any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connec- tion from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that is dam- aged or modified. Damaged or
modified bat- teries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explo- sion.
g) Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specified in the instruc- tions. Charging
improperly or at tempera-
English
tures outside the specified range may dam- age the battery and increase the
risk of fire.
23.7 Service
a) Have your power tool serviced by a qualified repair person using only
identical replace- ment parts. This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs. Serv- ice of battery packs should only
be per- formed by the manufacturer or authorized service providers.
23.8 Hedge trimmer safety warnings
Safety instructions for hedge trimmers a) Keep all parts of the body away from
the
blade. Do not remove cut material or hold material to be cut when blades are
moving. Blades continue to move after the switch is turned off. A moment of
inattention while operating the hedge trimmer may result in serious personal
injury.
b) Carry the hedge trimmer by the handle with the blade stopped and taking
care not to operate any power switch. Proper carrying of the hedge trimmer
will decrease the risk of inadvertent starting and resultant personal injury
from the blades.
c) When transporting or storing the hedge trim- mer, always fit the blade
cover. Proper han- dling of the hedge trimmer will decrease the risk of
personal injury from the blades.
d) When clearing jammed material or servicing the unit, make sure all power
switches are off and the power cord is disconnected. Unex- pected actuation of
the hedge trimmer while clearing jammed material or servicing may result in
serious personal injury.
e) Hold the hedge trimmer by insulated gripping surfaces only, because the
blade may con- tact hidden wiring or its own cord. Blades contacting a “live”
wire may make exposed metal parts of the hedge trimmer “live” and could give
the operator an electric shock.
f) Keep all power cords and cables away from cutting area. Power cords or
cables may be hidden in hedges or bushes and can be acci- dentally cut by the
blade.
g) Do not use the hedge trimmer in bad weather conditions, especially when
there is a risk of lightning. This decreases the risk of being struck by
lightning.
0458-714-0121-D
21
English
23 General Power Tool Safety Warnings
22
0458-714-0121-D
23 General Power Tool Safety Warnings
English
0458-714-0121-D
23
www.stihl.com
04587140121D
0458-714-0121-D
04587140121D
0458-714-0121-D
References
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Safety Data Sheets: Complete Overview | STIHL
- Information on Physical Agents Directive Vibration | STIHL | STIHL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>