JONES STEPHENS In Stainless Steel Large Removal Tool Remove Pipe Tubing Instructions
- June 13, 2024
- JONES STEPHENS
Table of Contents
JONES STEPHENS In Stainless Steel Large Removal Tool Remove Pipe Tubing
Product Information
This product is a removal tool designed to remove pipe/tubing from fittings. It is equipped with a flat side and a beveled side to ensure proper usage.
Product Usage Instructions
- Identify the direction imprint on the side of the removal tool.
- Place the flat side of the tool on the pipe/tubing side of the collar.
- Position the beveled side of the tool on the fitting side of the collar.
- Apply gentle pressure and twist the removal tool to disengage the pipe/tubing from the fitting.
- Once the pipe/tubing is detached, carefully remove it from the fitting.
Please note that these instructions are provided in English. For Spanish instructions, refer to “Lado Biselado de la Herramienta – del lado del soporte del accesorio” in the user manual.
To Remove Pipe/Tubing from Fitting:
-
Follow direction imprint on the side of the removal tool:
Flat Side of Tool – on the pipe/tubing side of the collar.
Beveled Side of Tool – on the fitting side of the collar. -
Slide removal tool over PlumBite® collar.
-
With tool firmly pressed over collar, slide pipe/tubing out of PlumBite® fitting.
Note: The PlumBite® fitting can be reused after disconnection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>