HOMEDEPOT THZ00011 Wall Light Instruction Manual
- June 4, 2024
- HOMEDEPOT
Table of Contents
THZ00011 Wall Light
Instruction Manual
SAFETY PRECAUllONS:
- TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
- IRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE MTH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE Fl XllJRE, llJRN OFF THE POWER, WAIT FOR IT TO COOL, AND M PE THE Fl XTURE MTH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE Fl XIIJRE.
NOTE: The product may not look exactly as shown in the figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt
compact fluorescent light bulbs or 9-watt LED bulbs.
To avoid the risk of fire, do not exceed the recommended wattage.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
Assembly Steps
PARTS INCLUDED
A| Junction box| 0
F| Leading wire| 3
G| Wire nut| 3
H| Wire| 3
I| Socket| 3
L| Glass shade| 3
K| Socket ring| 3
M| Bulb| 0
J| Backplate| 1
HARDWARE INCLUDED
B| Mounting Bracket| 1
C| Mounting Screw| 2
D| Stud| 2
E| Decorative nut| 2
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The power is OFF. | Ensure the power supply is ON. |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is OFF. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or the circuit breaker trips when the light is turned on. | ||
| There are crossed wires or the power wire is grounding out. | Check the wire |
connections. Contact a qualified electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>