iTrack TK102 Mini GPS Tracker User Manual
- September 28, 2024
- iTrack
Table of Contents
TK102 Mini GPS Tracker
“`html
Product Information
Specifications
- Product Name: TK102 Mini GPS Tracker
- Version: 1.3
- Manufacturer: iTrack
Product Usage Instructions
1. SIM Card Installation
Follow these steps to install the SIM card:
-
Locate the SIM card slot on the device.
-
Insert the SIM card into the slot according to the provided
diagram. -
Ensure the SIM card is securely inserted.
2. Battery and Charger
To charge the device:
- Connect the charger to the device.
- Plug the charger into a power source.
- Allow the device to charge fully before first-time use.
3. Startup
To start up the GPS tracker:
-
Press and hold the power button until the device powers
on. -
Wait for the device to initialize.
Frequently Asked Questions (FAQ)
Q: How do I change the password of the GPS tracker?
A: To change the password, follow these steps:
-
Send a specific SMS command to the device with the new
password. -
The device will confirm the password change via SMS.
Q: How do I set up continuous interval tracking?
A: Continuous interval tracking can be set up by sending a
specific SMS command to the device with the desired interval
duration.
“`
TK102 Mini GPS Tracker
User Manual
(Version 1.3)
Introduction
Thank you for purchasing the iTrack TK102 Mini GPS Tracker. This user manual
will help you operate the device efficiently and correctly and allow you to
start using your GPS tracker as quickly as possible. Please make sure to read
this manual carefully before using the device.
Please note that the specification and information in this document are
subject to changes without prior notice. Any change will be integrated into
the latest release. The manufacturer assumes no responsibility for any errors
or omissions in this document.
1
Contents
1 Summary…………………………………………………………………………………………………………………………………………3
2 Applications…………………………………………………………………………………………………………………………………..3
3 Hardware Description…………………………………………………………………………………………………………….. 4
4 Specification ……………………………………………………………………………………………………………………………….. 4
5 Usage………………………………………………………………………………………………………………………………………………..5
5.1 SIM card installation ……………………………………………………………………………..5
5.2 Battery and charger………………………………………………………………………………6
5.3 Startup ……………………………………………………………………………………………………..6
5.4 Initialisation…………………………………………………………………………………………….7
5.5 Changing the password……………………………………………………………………….7
5.6 Authorisation ………………………………………………………………………………………….7
5.7 SMS text message tracking…………………………………………………………………8
5.8 Continuous interval tracking………………………………………………………………8
5.9 Monitor mode (Voice Surveillance / Listening Mode)……………………9
5.10 Frequency of alarm messages ……………………………………………………………9
5.11 Alarms ………………………………………………………………………………………………………9
5.11.1
Low battery alarm……………………………………………………………………10
5.11.2
SOS alarm…………………………………………………………………………………..10
5.11.3
Movement alert………………………………………………………………………..10
5.11.4
Overspeed alert………………………………………………………………………..11
5.11.5
Shock sensor alarm …………………………………………………………………11
5.12 Sleep modes………………………………………………………………………………………….12
5.12.1
Timed sleep……………………………………………………………………………….12
5.12.2 Sleep by shock/vibration ……………………………………………………….12
5.12.3 Deep sleep by shock/vibration……………………………………………..13
5.12.4 Scheduled sleep……………………………………………………………………….13
5.12.5 Turning off sleep mode…………………………………………………………..14
5.13 Status check………………………………………………………………………………………….14
5.14 Check IMEI …………………………………………………………………………………………….14
5.15 Time setting ………………………………………………………………………………………….14
5.16 Reset hardware…………………………………………………………………………………….14
5.17 Configure parameters by USB…………………………………………………………..15
5.18 GPRS configuration for live real-time tracking (iTrack Live) ……..15
5.19 Web Tracking Platform Registration ………………………………………………17
6 Cautions ………………………………………………………………………………………………………………………………………..19
7 Troubleshooting……………………………………………………………………………………………………………………….20
2
Note: Throughout this user manual you will be given instructions on how to set
the tracker up in the form of setup commands which are sent to the Mini
Tracker via SMS text message. You will notice that some words are separated by
either a +’ or the word
space’. Where you see a +’ sign, this means that the two words should be written together without a space. Where you see
space’, this means that you need to insert a space between the two words.
The default password for the tracker is 123456 this is the password that
will be used throughout the user manual in all examples.
1 Summary The iTrack TK102 Mini GPS Tracker can be used to track and monitor
vehicles, assets or people. The Mini Tracker can either be used in SMS mode or
real-time live tracking mode using our iTrack Live GPS Tracking Platform. SMS
tracking allows you to call the tracker from your mobile phone and receive a
text message back to your phone with a full location report including a link
to Google maps so you can see on a map where your asset is to within 5 metres.
Live tracking uses mobile internet to continuously upload location data to a
remote server, allowing you to log on to our web-based tracking platform to
monitor your asset live in real time. Location data will be stored for 90 days
allowing you to look back at historical location records and run simulated
route repeats. There are also many more features within the software. Before
using the tracker, you must activate/top up your SIM card with credit and
insert it inside the tracker. An optional hard wire kit is available to
purchase separately from our website. This allows you to connect your Mini
Tracker to an external power source such as a vehicle battery, thus
eliminating battery life restrictions.
For live tracking, please visit our website www.itrackgpstrackers.com and
click on the `iTrack Live Login’ link at the top of the page or go direct to
www.itracklivetracking.com. You can also download our iOS/Android app to
effortlessly control your Mini Tracker.
2 Applications Fleet management Vehicle/motorcycle tracking Personal tracking
(e.g. children or vulnerable relatives) Asset tracking Personnel Management
3
3 Hardware Description Front View
Side View
Micro USB charging point and firmware data sync port
GSM/GPRS antenna
Bottom View
LED status light
ON/OFF SOS button
Microphone
Interior View
SIM card slot
4 Specification
Battery
4
Dimensions Weight Network Band
GPS Sensitivity GPS Accuracy
Time to First Fix
64mm x 46mm x 17mm (1.8″ x 2.5″ x 0.65″) 50g GSM/GPRS 850/900/1800/1900Mhz
-159dBm 5m
Cold status: 45s Warm status: 35s Hot status: 1s
Hard Wired Charger 12–24V input
(optional)
5V output
Wall Charger Battery Standby
Storage Temp. Operating Temp.
Humidity
110220V input 5V output Rechargeable changeable 3.7V 800mAh Li-ion battery 80 hours (approx.) Battery life can vary depending on many factors. -40°C to +85°C -20°C to +55°C 5%–95% non-condensing
5 Usage
5.1 SIM card installation Please make sure the SIM card is activated and you
have topped it up with credit. The tracker will only accept a standard size
SIM card micro’ or
nano’ SIM cards will not work in the tracker. Make sure
that there is no call transfer and call display is on the tracker will not
respond if the phone you are using to communicate with the tracker has its
number withheld.
5.1.1 Open the rear cover and remove the battery. 5.1.2 If you intend to use
an SD card for data logging, then please insert
the micro SD card in the holder as shown in the image below. If you prefer not
to use an SD card this is OK. SD cards are optional and are not included with
the tracker.
5
5.1.3 Insert the standard size SIM into the device by sliding it in to the SIM
card holder. The gold chip must be facing down. Please note that Micro or Nano
SIM cards will not work. Please see image below:
5.2 Battery and charger The battery needs to be charged for 8-12 hours before
the first use. Please use the desk top battery charging cradle provided. The
desk top charger can be found in the box underneath where the tracking device
is located. The tracker uses built-in Li-ion battery technology – a full
battery can power the Mini Tracker in standby mode for approximately 80 hours.
Under normal operation you can expect the battery to last 1-2 days, but this
can vary depending on usage and operating conditions. After the first use, the
battery should be charged for 3-4 hours each time. Warning! Do not puncture
heat or modify Li-ion batteries which contain harmful chemicals. If at any
time you notice a battery swell up or overheat then you should stop the
charging process immediately. Improper use of Li-ion batteries may cause the
battery to explode.
5.3 Startup Insert the SIM card and make sure the battery is inserted
correctly. Place the tracker outdoors and turn it on by pressing the “on/off”
button
until the green LED indicator is illuminated. It will take 10 to 40 seconds
for the tracker to acquire a GSM/GPS signal.
The green indicator LED will flash quickly while a signal is being
established. Once the signal is established the light will flash every 3
seconds. If the tracker fails to establish a signal the green light will be on
solid constantly. If this happens, please check the SIM is inserted correctly
and make sure the SIM has been topped up with credit. If the green light stays
on solid, then this could just mean there is no signal in your area. When the
tracker receives a GPS signal, you can begin to set up the device
6
Note: Throughout this user manual you will be given instructions on how to set
the tracker up in the form of setup commands which are sent to the Mini
Tracker via SMS text message. You will notice that some words are separated by
either a +’ or the word
space’. Where you see a +’ sign, this means that the two words should be written together without a space. Where you see
space’, this means that you need to insert a space between the two words.
5.4 Initialisation To initialise the Mini Tracker, you need to send the
following SMS command to the tracker:
SMS Command: begin+password Tracker Response: begin ok! Example: begin123456
5.5 Changing the password
SMS Command: password+old password+space+new password Tracker Response:
password ok! Example: password123456 888888 The new password must be 6 digits
long using only numbers. Note: If you forget your password, you can restore it
to the default setting (123456) by sending the SMS command:
adminpassword13142324
5.6 Authorisation To use features such as geofence, shock sensor, movement or
over speed alerts you will need to authorise your mobile phone number first.
Up to 5 telephone numbers can be authorised. If you call the tracker 10 times
in succession the number will be authorised automatically. Alternatively, you
can authorise your number in the following way:
SMS Command: admin+password+space+mobile phone number Tracker Response: admin
ok! Example: admin123456 07976123123
Once a phone number is authorised, the tracker will not reply to phone calls
with a location report from unauthorised numbers. However, the tracker will
still respond to SMS commands providing the password is correct. Alarm
notifications and alerts can only be sent to authorised numbers. Deleting an
authorised number:
7
SMS Command: noadmin+password+space+authorised number Example: noadmin123456
07976123123
Note: You must make sure there are no spaces in the phone number. If you are
planning on using the tracker in another country, then make sure you authorise
your number in international format (e.g 44 for UK). This will make sure the
tracker can communicate with the authorised number if it was to go outside of
the UK. To enter your phone number in international format simply remove the
0′ and replace it with
44′. For example, 07976 123123 would be entered as
447976123123. In the UK don’t use the `44′ format.
5.7 SMS text message tracking If there are no authorised numbers set up, the
Mini Tracker will reply to all calls from any mobile phone with a location
report via SMS. If there are authorised numbers set up the tracker will only
send location reports to authorised numbers.
To use SMS tracking, simply call the tracker from your mobile phone. After a
couple of rings, the call will be sent to the answerphone at this point hang
up the call and wait for the tracker to send you a detailed location report
via SMS. The text message will include co-ordinates of the tracker, current
speed, remaining battery percentage, date & time. There will also be a link to
Google Maps simply click on the link and Google Maps will automatically open
on your smart phone with a pinpoint showing the location of your tracker.
In the event where the tracker is unable to establish a GPS signal, the last
known location will be sent.
5.8 Continuous interval tracking You can configure the tracker to send
automatic location reports at set time intervals. If SMS mode is activated,
reports will be sent continuously via SMS. If GPRS real-time live tracking
mode is activated, updates will be automatically uploaded to the online
tracking platform.
You can change the time values accordingly to suit your tracking requirements.
Please see various interval tracking examples below:
SMS Command: fix030s002hn+password Tracker Response: tracker will update
every 30 seconds when the device is moving and every 2 hours when stationary
until told to stop. (n means unlimited times) Example:
fix030s002h***n123456
8
SMS Command: fix030m001h005n+password Tracker Response: the tracker will
update every 30 minutes when moving and every 1 hour when stationary for 5
times only. Example: fix030m001h005n123456
To cancel interval tracking: SMS Command: nofix+password Tracker Response:
nofix ok Example: nofix123456
5.9 Monitor mode (Voice Surveillance / Listening Mode) The Mini Tracker can
also be used as a listening device. When monitor mode is activated the tracker
will automatically answer when you call the tracker and allow you to listen
using the in-built microphone. The tracker will be totally discreet and not
make any sound in this mode.
To activate monitor mode: SMS Command: monitor+password Tracker Response:
monitor ok! Example: monitor123456
The tracker will now answer the call and allow you to listen. To stop
listening, simply hang up the call.
The tracker can only be used in a single mode either tracking mode or
monitor (listening) mode.
To switch back to tracking mode: SMS Command: tracker+password Tracker
Response: tracker ok! Example: tracker123456
5.10 Frequency of alarm messages By default, the tracker will send alarm
messages 5 times before the alerts stop. However, you can change the number of
times the tracker sends the alarm messages to your authorised phone number.
SMS Command: xtime+password+003 Tracker Response: xtime ok! Example:
xtime123456003 The tracker will now only send the alarm messages 3 times
before they stop. 5.11 Alarms
9
5.11.1
Low battery alarm The tracker can send you an alert when the battery is low. feature is activated by default.
This
To activate: SMS Command: lowbattery+password+space+on Tracker Response: When battery is low tracker will send alert with coordinates. Example: lowbattery123456 on
To deactivate: SMS Command: lowbattery+password+space+off Tracker Response: When battery is low tracker will send alert with coordinates Example: lowbattery123456 off
5.11.2 SOS alarm Using the SOS button located on the side of the tracker, the user can press this button in case of emergency. Once the button is pressed for 3 seconds, an SOS message will be sent to all authorised numbers.
The SOS messages will continue until one of the authorised numbers replies to the tracker. Please see below:
SMS Command: help+space+me! Example: help me!
5.11.3 Movement alert The movement alert allows authorised numbers to be alerted if the tracker moves outside of a set radius. To configure the movement alert feature the tracker must be stationary for a minimum of 5 minutes. After 5 minutes, you may proceed as follows:
SMS Command: move+password+space+0200 Tracker Response: move+location (when tracker moves outside of set radius) Example: move123456 0200
This will activate the movement alert with an area radius of 200 metres. The maximum radius is 999 metres.
Note: Setting the radius less than 100 metres could result in a false 10
alarm. The fault occurs if the GPS position is miscalculated due to bad GPS signal.
To cancel movement alert: SMS Command: nomove+password Example: nomove123456
5.11.4 Overspeed alert The tracker can be configured to send an alert to authorised numbers when a certain speed in exceeded.
To activate: SMS Command: speed+password+space+080 Tracker Response: speed ok! Example: speed123456 080
(speed in km/h)
To deactivate: SMS Command: nospeed+password Example: nospeed123456
Note: The recommended speed should not be less than 50km/h. If the speed is set lower than this you may get a false alarm due to GPS inaccuracy.
5.11.5 Shock sensor alarm The tracker has an in-built shock sensor which will sense the slightest movement. When the shock sensor is triggered, an alert will be sent to the authorised numbers. The shock sensor is deactivated by default.
To activate: SMS Command: shock+password Tracker Response: shock is activated! Example: shock123456
To deactivate: SMS Command: noshock+password Tracker Response: shock is deactivated! Example: noshock123456
The sensitivity of the shock sensor can be changed.
There are 3 different settings: 11
First Level: Alarm will be triggered after detecting very slight vibration.
Command: sensitivity+password+space+1 Example: sensitivity123456 1 Second
Level: Alarm will be triggered after medium vibrations in 2 seconds.
Command: sensitivity+password+space+2 Example: sensitivity123456 2
Third Level: Alarm will be triggered after heavy vibrations in 5 seconds.
Command: sensitivity+password+space+3 Example: sensitivity123456 3
5.12 Sleep modes There are various sleep modes available which can
significantly increase the battery life of the tracker.
5.12.1 Timed sleep When this mode is activated, the tracker will go in to
sleep mode after the tracker has been in an idle state for 5 minutes. The GPS
module will shut down and the LED will turn off. The GSM module will still be
on, so you are still able to call or text the tracker. If you call or text the
tracker, it will wake it up. Please note if the movement or shock sensor is
activated then sleep mode will not work.
SMS Command: sleep+password+space+time Tracker Response: sleep time ok
Example: sleep123456 time
5.12.2 Sleep by shock/vibration When this mode is activated, the tracker will
go in to sleep mode when no movement or vibration is detected for 5 minutes.
The GPS module will shut down and the LED will turn off. The GSM module will
still be on, so you are still able to call or text the tracker. Vibrations or
any operation can wake the tracker.
SMS Command: sleep+password+space+shock Tracker Response: sleep shock ok
Example: sleep123456 shock
12
5.12.3 Deep sleep by shock/vibration When this mode is activated, the tracker
will go in to deep sleep mode when no movement or vibration is detected for 5
minutes. The GPS module will shut down and the LED will turn off. The GSM
module will also shut down so you will not be able to communicate with the
tracker. Only vibration or shock will wake the tracker up the tracker will
automatically send a notification message once it is woken up by vibration.
SMS Command: sleep+password+space+deepshock Tracker Response: sleep deepshock
ok Example: sleep123456 deepshock
5.12.4Scheduled sleep When this mode is activated, the tracker will turn
itself off completely and only wake up at set time intervals. When it wakes up
it will work for 5 minutes, report its location, and then switch it off again.
If you are using the tracker in GPRS live real time tracking mode, remember to
activate less GPRS’ mode otherwise the tracker will keep waking up to record its location at the set time interval. (see
Less GPRS’ section)
SMS Command: schedule+password+space+time interval Tracker Response: schedule
ok Example: schedule123456 30m
Time interval setting: m=minutes, h=hours, d=days The example above is set
every 30 minutes.
The maximum time setting for schedule mode is 30 days.
To cancel the scheduled sleep mode: SMS Command: noschedule+password Tracker
Response: schedule ok Example: noschedule123456
Note: Scheduled sleep mode can only be cancelled once the tracker has been
woken up. This mode will offer the longest battery life as the power
consumption will be significantly reduced as the GPS and GSM modules are shut
down.
13
5.12.5 Turning off sleep mode
SMS Command: sleep+password+space+off Tracker Response: sleep off ok Example: sleep123456 off 5.13 Status check
SMS Command: check+password Tracker Response: Complete status report of Mini Tracker Example: check123456
The tracker will respond with a complete status report. below:
Battery: 100% GPRS: ON/OFF GPS: OK/NO GPS GSM Signal: 1-32 (the higher, the
better) APN: payandgo.o2.co.uk IP: 195.181.245.145 PORT: 10200
See example
5.14 Check IMEI The IMEI number of the tracker can be found on the sticker behind the battery cover. However, if you can’t access the tracker, you can send the following command to the tracker:
SMS Command: imei+password Tracker Response: 15-digit IMEI number Example: imei123456
5.15 Time setting It is important to change the time setting of the tracker to suit the country you are in.
SMS Command: time+space+zone+password+space+local time zone Tracker Response: time ok! Example: time zone123456 0
The example shown above is set for GMT (UK time). For a country with a time
zone of -6 you would replace the 0′ with
-6′
5.16 Reset hardware This command will reboot the GSM and GPS modules of the
tracker.
14
Please note this will not restore factory settings.
SMS Command: reset+password Tracker Response: reset ok Example: reset123456
5.17 Configure parameters by USB Using the USB cable supplied, you can connect
the tracker to a computer and open the configuration file of the tracker. Once
you have opened the configuration file you can manually change the parameters
and settings.
5.18 GPRS configuration for live real-time tracking (iTrack Live) GPRS
tracking mode (live tracking) allows the tracker to upload its location to the
web based tracking platform at pre-determined time intervals. All iTrack GPS
trackers are designed to be compatible with our online tracking platform
iTrack Live. All trackers are supplied with a free 14-day trial subscription.
After the trial period expires, you will need to purchase a subscription from
our online shop. The tracking login can be found on our home page
www.itrackgpstrackers.com or direct at www.itracklivetracking.com If you would
like to use GPRS live tracking mode, you must configure the tracker and set up
the APN and IP settings. Please follow the instructions below:
5.18.1 Configure APN setting APN is an abbreviation for Access Point Name and
changes depending on which mobile network you are using. For more information
about your local APN, please check with your SIM card provider (e.g. O2,
Vodafone, EE, Three, etc.)
SMS Command: apn+password+space+local APN Tracker Response: apn ok Example:
apn123456 payandgo.o2.co.uk
The example above shows the command required when using an O2 PAYG SIM card.
15
Please see table below showing some different examples of APN codes:
MOBILE NETWORK PROVIDER
O2 (PAYG) O2 (Pay Monthly) T-Mobile Orange / EE Vodafone (Pay Monthly)
Vodafone (PAYG) Three Tesco Mobile Virgin Mobile
APN CODE
payandgo.o2.co.uk mobile.o2.co.uk uk.general.t-mobile.uk everywhere
wap.vodafone.co.uk pp.vodafone.co.uk three.co.uk prepay.tesco-mobile.com
goto.virginmobile.uk
5.18.2Configure IP and port setting This setting will configure the tracker to upload its location to the online tracking server.
SMS Command: adminip+password+space+IP+space+port Tracker Response: adminip ok Example: adminip123456 195.181.245.145 10200
The example above will configure the tracker to upload its position IP address 195.181.245.145, port 10200. This is the IP address and port of the iTrack Live GPS Tracking Platform.
Note: The text format of the command is very important. Please take care when inserting spaces where they are required.
5.18.3Switch to GPRS mode
You now need to turn on GPRS mode.
Please follow the instructions below: SMS Command: gprs+password Tracker Response: gprs ok Example: gprs123456
16
To switch back to SMS mode: SMS Command: sms+password Tracker Response: sms ok
Example: sms123456
5.19 Web Tracking Platform Registration You will need to create a user account
on iTrack Live before using the tracker in GPRS real-time mode (live
tracking). Please visit www.itrackgpstrackers.com and click the iTrack Live Login’ link in the top right corner of the page or go directly to www.itracklivetracking.com. Here you will be able to create a new user account. The username and password on the online platform will be the same for the mobile iOS/Android App so please make a note and keep it safe. 5.19.1 Adding your device to the platform You now you need to add your tracker to the iTrack Live GPS Tracking Platform you can add multiple trackers. From the control panel on the left-hand side click the arrow icon with the green’+’ sign as shown below. You will need the IMEI number of the tracker which can be found on a sticker in the battery compartment (alternatively send the SMS command imei123456 and the device will send the IMEI via SMS). Once the
object’ is added you can then click the
three small dots to control the tracker.
Once you have added the tracker to the object list you can now begin to
control the monitor and control the tracker. When the device is online the
signal icon will turn green if the icon is grey this means the tracker is
offline or has no GPRS reception. GPRS settings must be configured before the
tracker will show online (see section 5.19).
You will now be able to use the iTrack Live GPS Tracking Platform and all of
its features.
17
To set continuous tracking intervals follow the steps below: Click 3 dots icon
Send Command > Select
Position Interval’ template > edit command to required time interval in seconds. You can set the local time of the tracker as follows: Send SMS Command: time+space+zone+password+space+time zone. Example for UK time zone: time zone123456 0 Note: You would need to change the time zone to
1′ during British Summer Time
You can view historical location records as follows: Click 3 dots icon > Show History > Choose parameter
It is possible to view a simulated route repeat when viewing the history. You are able to speed the timeframe up to 6x. You can set up geofence zones as follows:
Right click on map > New Zone > Draw Zone > Save Zone You can change the user settings by clicking the icon shown below:
5.19.2 IOS &Android mobile APP If you have a smart phone or tablet you can download the iOS/Android App from the App store. Please search for `iTrack Live’ to find the App. See image below of App icon:
18
6 Cautions 1. Do not put the tracker in overheated or overcooled places. 2.
Handle carefully. Do not vibrate or shake it violently. 3. Please use a dry
cloth to clean and do not use chemicals and aggressive cleaners. 4. Please do
not paint the device; this may lead to internal circuit failure. 5. Please do
not disassemble the device. 6. Please read the user manual carefully before
installation and operation. If you have any questions how to use the device or
any of the features, then please contact us at: hello@itrackgpstrackers.com
19
7 Troubleshooting
Faults
Possible reason
Solution
Tracker won’t turn on
1. Battery is low. 2. Battery not inserted correctly. 3. Battery contacts damaged.
1. Charge the battery 2. Check battery contacts are touching each other. 3. Tracker will need to be repaired.
No GSM signal / tracker not responding to SMS messages
1. SIM card not inserted correctly. 2. Wrong size SIM – Micro or Nano SIM cards will not work. 3. No network coverage in your area. 4. No credit on SIM card.
1. Check SIM installation. 2. Use standard size SIM card. 3. Try using another SIM card. 4. Top up SIM card with credit.
`Pwd fail’ message
1. Tracker not recognising password. 2. Forgot your password.
1.Send the following SMS to reset: reset123456
2. Send the following SMS to reset the password back to default setting
(123456): adminpassword13142324
GPRS fail to be online
1. APNIP and port is not correct. 2. No GPRS subscription on SIM. 3. No credit on SIM card. 4. No GPS signal.
1. Check configuration. 2. Subscribe GPRS service. 3. Top up with credit. 4. Wait for GPS signal to be acquired.
20
References
- iTrack GPS Trackers - Affordable Tracking Devices for All Assets
- iTrack GPS Trackers - Affordable Tracking Devices for All Assets
- iTrack Live 4.24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>