CLEAN LIKE A PRO Mould and Algae Treatment Pro Mould User Manual

CLEAN LIKE A PRO Mould and Algae Treatment Pro Mould

Product Specifications:

• Product Name: PRO MOULD
• Type: Mould Cleaner & Inhibitor
• Usage: Ready to Use
• Features: Fast acting, deeper penetration, long-lasting results
• Indoor and Outdoor Use: Yes
• Duration of Effectiveness: Up to 2 years and longer
• Suitable Surfaces: Various indoor and outdoor surfaces
• Safety Classification: Not a dangerous good

Product Usage Instructions

Spray and Wipe Method:

1. Decant the product into a spray bottle.
2. Spray or foam onto the surface to be treated, such as shower grout.
3. Leave the product on the surface for 20 minutes.
4. For stubborn cases, use a brush to agitate the area and then reapply the spray.
5. Rinse off with water and allow to dry.

Large Area Cleaning:

1. Clean all dirt and debris from the area to be treated.
2. Apply PRO MOULD using a garden sprayer or pressurized spray pack.
3. Use a broom to spread the product and ensure it penetrates ingested areas.
4. Hose off the area once satisfied with the effect. Repeat if necessary for heavily infested areas.

Frequently Asked Questions (FAQ):

• Q: How long does PRO MOULD keep mould off external areas?
  A: PRO MOULD can keep mould off external areas for up to 2 years and even longer in many cases.

• Q: Can PRO MOULD be used indoors?
  A: Yes, PRO MOULD is suitable for indoor use as well as outdoor applications on a wide range of surfaces.

• Q: Is PRO MOULD safe to use?
  A: Yes, PRO MOULD is not classified as a dangerous good and is safe for use when following the provided directions.

READY TO USE MOULD CLEANER & INHIBITOR fast acting, deeper penetration, long- lasting results

WHAT IS SPECIAL ABOUT PRO MOULD COMPARED TO OTHER MOULD CLEANERS?

• PRO MOULD is a ‘ready to use’ mould and algae cleaner.
• PRO MOULD can be used indoors as well as outdoors on a larger range of surfaces.
• PRO MOULD is very fast-acting and is not listed as a Dangerous Good.
• PRO MOULD is proven to keep mould off external areas such as retainer walls, driveways, buildings, tennis courts, fake grass, shade sales and more for up to and beyond 2 years, in many cases considerably longer!
• Great for shower treatments as well as indoor surfaces

HOW DOES IT WORK?

• PRO MOULD is a specialised formula that uses the power of sodium hypochlorite or bleach as a broad-spectrum mould killer and inhibitor.
• However, bleach by its-self is only a very short-term treatment.
• We have been able to create a treatment that enhances, penetrates kills the Mould spores deep in the porous of surfaces where the spores were protected, until now.
• Our unique formula allows mould removal unlike any product before.

BE SAFE, DON’T STAY IN A HOME INFESTED WITH MOULD OR MILDEW. MOULD CAN CAUSE SERIOUS HEALTH PROBLEMS, AS WELL AS STRUCTURAL DAMAGE.

Key features

• Fast acting
• When used externally, it can keep mould off for up to 2 years and longer
• For indoor and outdoor use
• Can be applied to many different surfaces and materials
• Does not have to be used regularly
• Provides a healthy environment, reduces health risks
• Property protection
• Easy to use
• Can penetrate areas other mould cleaners cannot access (such as silicons)
• PRO MOULD is not classified as a dangerous good

Moulds can cause nasal stuffiness, throat irritation, coughing or wheezing, eye irritation, or, in some cases, skin irritation. People with mould allergies may have more severe reactions

DIRECTIONS FOR USE

PRO MOULD is a ‘Ready to Use’ Product. Do not dilute or add water. Do not mix with other chemicals especially with acids

Spray and Wipe

Decant the product into a spray bottle. Spray or foam onto the surface such as shower grout. Leave on the surface for 20 minutes. For extreme cases, it may require a brush over and a repeat of the spray. Wash off with water and allow to dry

Concretes, floor, driveway, stonework, large area cleaning, Tennis courts, Synthetic grass, shade sails and more.

PRO MOULD can be applied using a garden sprayer or pressurised spray pack. Sweep or clean all dirt and debris from the area to be treated. Spray PRO MOULD over the area to be cleaned of algae and mould. Use a broom to push the product around and help it sink into infested areas. Hose off the area when satisfied an effect has taken place. Thick infested areas may require a second treatment.

CONTACT DETAILS
Clean Like a Pro 21 Activity Cres, Molendinar QLD 4214, Australia
E : info@cleanlikeapro.com.au
www.cleanlikeapro.com.au

References

• Clean Like A Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>