ABUS 787/797 Smart-BT Wall Mounting KeyGarage Instruction Manual
- June 6, 2024
- ABUS
Table of Contents
ABUS 787/797 Smart-BT Wall Mounting KeyGarage Instruction Manual
Thank you for choosing this ABUS product!
Please read this guide carefully before use. Keep these instructions and
provide all users with instruction on how to use it.
To set up your smart KeyGarage™ for the first time, you will need a Bluetooth®
enabled smartphone (Bluetooth 4.0 LE or higher), a currently supported iOS or
Android software version and the free ABUS HomeTec Pro app for iOS or Android.
The smart KeyGarage™ can be operated using either the ABUS HomeTec Pro app or the keypad with an automatically generated code.
The contents of this installation and operating manual reflect the current
status at the time of printing. The printed manual may be outdated at the time
of the product’s entry into service due to updates and further developments.
We therefore ask you to visit our website
and enter ,,787 SmartBT” or ,,797 Smart-BT” into the search bar. You’ll always
find the current and complete version of the installation and operating
instructions on the product page under the ,,Downloads” column.
Opening the key compartment
- Can be done in delivery state without Bluetooth® / code
- Via Bluetooth®
- Via generated code
Warnings and safety instructions
Please read and observe these safety instructions. Non-observance of these instructions could lead to fire, injury to persons and/or device damage!
Caution
- Keep packaging material and small parts away from children: Danger of suffocation!
- Danger of pinching fingers when closing the KeyGarage™.
- Keep batteries out of the reach of children. Children may put batteries in their mouths and swallow them. This can cause serious harm to their health. Seek immediate medical attention in this event!
- Batteries must be inserted with the correct polarity (+ and -).
- Empty batteries must be removed or replaced immediately.
- Different battery types, or new and used batteries, must not be mixed.
- The battery terminals must not be short-circuited.
- Risk of burns from contact with leaking or damaged batteries! In these cases, use suitable protective gloves and clean the battery compartment with a dry cloth.
- Batteries must not be dismantled, punctured, damaged, short-circuited, heated, charged or thrown into an open fire (risk of explosion!).
- Do not use or store the product in areas where the temperature could reach below -10°C or above +50°C. Do not expose the product to direct sunlight for long periods of time!
Attention
- Only open the key compartment of the KeyGarage™, never the housing with the electronic unit.
- For 797 Smart-BT: When changing the shackle of the smart KeyGarage™, make sure that the lock does not fall down.
- Make sure that the smart KeyGarage™ is always properly locked.
- The smart KeyGarage™ must not be operated lying down in unprotected outdoor areas: penetrating moisture can damage the electronic unit or objects in the key compartment.
- When dismantling the shackle, put on the silicone sealing plugs so that no moisture can get into the smart KeyGarage™.
- The product may only be used for its intended purpose. Any modification to the product is prohibited.
787 Smart-BT wall mounting
Insert or change batteries
HomeTec Pro App
- Download the ABUS HomeTec Pro app and enable Bluetooth® on your smartphone.
- Start the app and follow the instructions in the app.
- Pay attention to the assignment of the different key cards to the products, and always scan the correct key card. Never leave the key card in the smart KeyGarage™.
- To program the smart KeyGarage™, start by pressing the button ,,Add HomeTec Pro / component”.
- It is imperative to keep the ABUS key card(s) in a safe place even after completing the setup! If you forget your password, you can reset and reassign it by scanning the QR code. Do not give the card to third parties.
To guarantee proper function, we expressly recommend performing updates in the app and software/firmware updates for HomeTec Pro components in a timely manner. The app will provide information on this. You can also perform the respective update in the component’s settings.
LED signalling
Technical data
EU Declaration of Conformity
Hereby, ABUS August Bremicker Söhne KG declares that the radio equipment types
787 / 797 Smart-BT are in compliance with Directives 2014/53/EU and
2011/65/EU. The full text of the EU Declaration of conformity is available at
the following internet address: docs.abus.com
UK Declaration of Conformity
Hereby, ABUS August Bremicker Söhne KG declares that the radio equipment types
787 / 797 Smart-BT are in compliance with the Radio Equipment Regulations 2017
and the Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012. The full text of the UK declaration
of conformity is available at the following internet address: docs.abus.com
Disposal
It is your responsibility to delete all stored personal data prior to disposal
of the product. This product contains valuable raw materials. At the end of
its service life, dispose of the product in accordance with the applicable
legal requirements. Electrical appliances, rechargeable batteries and
batteries must not be disposed of with household waste. Disposal must be
carried out in accordance with Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), or Directive 2006/66/EC on batteries and
accumulators and waste batteries and accumulators. Dispose of the packaging
according to type. Separate the cardboard, foil and plastic elements for
recycling. Please contact the local authority responsible for disposal if you
have any queries. You can obtain information on collection points for your old
appliances, for example, from the local municipal or city administration, the
local waste disposal companies, or your specialist dealer.
WEEE-Reg.-Nr. DE79663011
Warranty
ABUS products are designed, manufactured and tested in accordance with
applicable regulations with great care. The warranty exclusively covers faults
that are caused by material or manufacturing defects. If a material or
manufacturing defect can be proven, the product will be repaired or replaced
at the discretion of the warrantor. In such cases, the warranty ends with the
termination of the original warranty period. Any further claims are expressly
excluded. ABUS assumes no liability for defects or damage that has been caused
by external influences (e.g. transport, external forces), improper use, normal
wear and tear or non-compliance with this operating and installation
instructions document. If a warranty claim is asserted, the product must be
returned with the original receipt with date of purchase and a brief written
description of the fault. Subject to technical alterations. No liability for
mistakes and printing errors.
Licence texts
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by ABUS is under license. Other
trademarks and trade names are those of their respective owners.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries and regions. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
USA-required information regarding products with FCC certification and
SDoC
Contains Transmitter Module FCC ID: XPYANNAB1 Changes or modifications not
expressly approved by the party responsible for compliance could void the
user`s authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Supplier`s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Unique Identifier: 787 Smart-BT KeyGarage™ and 797 Smart-BT KeyGarage™
Responsible Party U.S. Contact Information ABUS USA LLC 23910 N 19th Avenue,
Unit #56 Phoenix, AZ 85085-1850
Phone: 623-516-9933
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Canada-required information regarding products with ICES certification and
SDoC
Contains IC: 8595A-ANNAB1
CAN ICES-003 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
© ABUS 2021
ABUS August Bremicker Söhne KG
D 58292 Wetter | Germany.
Tel.: +49 (0) 23 35 63 40 |
www.abus.com|info@abus.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>