ABUS AZBW10120 Motion Detector PIR MW User Guide

June 5, 2024
ABUS

AZBW10120 Motion Detector PIR MW
User Guide

Disassembling the Detector

ABUS AZBW10120 Motion Detector PIR MW - overview

1 Lens
2 LED Light Pipe
3 Lens holder
4 PCB
5 Nut
6 Casing Screw

Printed Circuit Board (PCB)

ABUS AZBW10120 Motion Detector PIR MW - overview 2

1 PIR Sensor
2 AND/OR Mode

OR is non EN compliant
3| 50Hz as default
60Hz remove header
4| Microwave Module
5| Tamper Resistor Headers
6| Terminals
7| Alarm Resistor Headers
8| Tamper Spring
9| LED ON/OFF
LED ON
LED OFF
10| Sensitivity Settings
LOW
AUTO (DEFAULT)
HIGH

Installation

ABUS AZBW10120 Motion Detector PIR MW - overview1

Detector Backplane Installation
Screw Model: PA_3.5 ×25
Number: 4

Installation Hints

ABUS AZBW10120 Motion Detector PIR MW - Installation

The Lens

ABUS AZBW10120 Motion Detector PIR MW - The Lens

A| Detection Range
85.9°
52 zones
4 planes
---|---
B| Mounting height range from 1.8 m to 2.4 m. The recommended mounting height is 2.2 m.
Note: PET immunity is available up to 10 m and at a height that is below the top plane of view
C| Microwave Range Control
Max: 12 m
Medium: 0 to 8 m
Min: Off
D| To use the pet immunity function, please install a pet mask.
Pet Table
| Sensitivity mode High| Weight
---|---
High| 5 kg
Auto| 10 kg
Low| 15 kg

Resistor Wiring

The detector has two methods for resistor wiring:

  1. Use headers to select the End of Line resistance (Control panel dependent) on the ALARM/TAMPER header pins.
  2. Select a resistance (Control panel dependent), and add the resistor to the ALARM/TAMPER wiring ports of the detector.

Note: If EOL (End of Line) wiring is not used, leave the headers OFF. If the headers and the header pins do not match, do not force the header, please select method 2 to wire the resistor. Method 1 and method 2 should not be used on the ALARM/TAMPER at the same time.

ABUS AZBW10120 Motion Detector PIR MW - Resistor
Wiring

Choose the Connection Type

  1. Normally Closed
    ABUS AZBW10120 Motion Detector PIR MW - Normally
ClosedA| Alarm Control Panel
    ---|---
    B| Detector
  2. Single End of Line Wiring
    The connection shows the example:
    1. Normal: 1K
    2. Alarm: Infinite
    3. Tamper: 0 KABUS AZBW10120 Motion Detector PIR MW - Line
WiringA| Alarm Control Panel
    ---|---
    B| Detector
  3. Double End of Line Wiring
    The connection shows the example:
    1. Normal: 1K
    2. Alarm: 2K
    3. Tamper: 0 K or infinite

ABUS AZBW10120 Motion Detector PIR MW - Double End

A Alarm Control Panel
B Detector

Powering up

ABUS AZBW10120 Motion Detector PIR MW - Powering up

Powering up:
Aft er powering on, the indicator flashes rapidly. Once the detector self-test is completed, the LED indicator will go out until the detector detects movement

Dimension and Weight

ABUS AZBW10120 Motion Detector PIR MW - Dimension

Technical Specification

Detection range 12m, 85.9°
Detection speed 0.3 ~ 2 m/s
Sensitivity High, Auto, Low*
Auto sensitivity Yes
Onboard EOL Yes
Digital temperature compensation Yes
Technology Digital microprocessor-based
Sealed optics Yes
Creep zone protection Yes
Tamper protection Front
LED indicators Green(PIR), Orange(microwave), Blue(alarm)
Microwave frequency 24Ghz (24.15Ghz to 24.25Ghz)
Microwave range Potentiometer adjustment
Microwave transmission power max. 18.6 mW
AND/OR mode AND = PIR + MW

OR = PIR / MW (shouldn’t be used with pets)
Pet immunity| 10Kg (With optional pet mask)
Power supply| 9 to 16 VDC (standard: 12 VDC)
Current consumption| 17mA quiescent and maximum at12V DC
Operating temperature| -10 °C to 40 °C (14 °F to 104 °F)
Storage temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity| 10% to 90%
Mounting height| 1.8 – 2.4m
Dimensions (HxWxD)| 103.8 mm × 65.7 mm × 45.5 mm
Weight| 99 g

  • Low is non-EN and non INSERT compliant.

DECLARATION OF CONFORMITY
ABUS Security-Center hereby declares that the enclosed product(s) comply with the requirements of the following directives: EMC Directive (2014/30/EU) and RoHS Directive (2011/65/EU). The full EU Declaration of Conformity text can be found at: www.abus.com/product/AZBW10120 It can also be obtained at the following address:
ABUS Security Center
GmbH & Co. KG, Linker Kreuthweg 5,
86444 Affi ng, GERMANY
Subject to technical modifications and color changes. No liability is assumed for mistakes or printing errors.
EN 50131-1:2006+A1:
2009+A2:2017
EN 50131-2-4:2008
Security Grade (SG) 2
Environmental Class (EC) II
ABUS Security-Center GmbH & Co. KG
Linker Kreuthweg 5 86444 Affing
Germany
abus.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals