TAOTRONICS TT-BH051 True Wireless Stereo Earbuds User Manual

TAOTRONICS TT-BH051 True Wireless Stereo Earbuds

PACKAGE CONTENTS

1.  True Wireless Stereo Earbuds
2.  8 x Ear Tips (two are equipped on the earbuds)ｘ 1 x USB-C Charging Cable
3.  1 x User Manual
4.  1 x Quick Start Guide

PRODUCT DIAGRAM

1.  LED Indicator
2.  Multifunction Touch Control
3.  Microphone
4.  Charging Contacts
5.  Charging Slot
6.  Charging Case
7.  Charging Indicators
8.  Reset Button
9.  USB-C Charging Port

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Hearing Safety

•  Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
•  Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
•  Do not set volume too high to stay aware of your surroundings.
•  Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
•  For your safety, avoid distractions from music or phone calls when you are driving or doing other activities with potential dangers.
• Warning: Please set the volume to the proper level to avoid hearing damages

Caution

•  Do not expose this product to high temperatures.
•  Do not immerse the earbuds into water or expose them to humidity for a long time.
•  Do not clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
•  Avoid dropping.
•  Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazards`.
•  Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty avoidance, and/or property loss.
•  Close attention is needed when using near children.
•  Keep the charging case away from water, rain or any other liquid.
•  Don’t use the product in thunderstorms to avoid malfunction or electric shock.
•  Always ask a professional technician or authorized personnel for repair.

WARNING:
This product contains a lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.

HOW TO WEAR

Choose the Right Tips (Fig. 3)
Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.

Wear the Earbuds (Fig. 4)
Please wear the earbuds as shown below.

Pictures only for reference.

Bluetooth Caution

•  When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
•  When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging
Charging the Earbuds

1.  Put the earbuds into the charging case as per the L (left) and R (right) marks (Fig. 5).
2.  Cover the lid and charging will start automatically (Fig. 6).

Note:

•  Please fully charge the earbuds when using them for the first time.
•  When battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
•  Charge the earbuds at least once every 3 months when not using for a long time.

Charging the Charging Case

1.  Connect the charging port with any USB charging adapter or active computer USB port (Fig. 7).
2.  The charging indicators will light up progressively.

Note : Unplug the charging cable (timely) when fully charged.

Power On
Uncover the lid and they will power on automatically.

Power Off

Put the earbuds into the charging case and close the lid, they will turn off automatically.

Pairing

•  You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
•  Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
•  When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.

Couple Earbuds Mode

1.  Uncover the lid and take out both earbuds. They will connect with each other automatically. The LED indicator on the left earbud will flash blue and white alternately indicating the earbuds are in pairing mode now.
2.  Turn on the Bluetooth function on your device and search for nearby devices. Find “ TaoTronics Duo Free Pro” in the searching results, tap on the name to connect.
3.  Once connected, the LED indicators on both earbuds will flash blue slowly.

Note:

•  The earbuds can remember the devices paired previously, and will attempt to pair with the last connected device. If re-pairing failed, the earbuds will enter pairing mode.
•  It is not recommended to wear the two earbuds on different people. If necessary, please keep the two earbuds close to each other in couple earbuds mode.

Single Earbud Mode

1.  Take out one earbud from the charging case, and make sure the other one is placed in the charging case and the lid is covered.
2.  It will try to pair with the last paired device first then enter pairing mode with its LED indicator flashing blue and white alternately if pairing failed.
3.  Turn on the Bluetooth function on your device and search for nearby devices. Find “TaoTronics Duo Free Pro”in the searching results, tap on the name to connect.
4.  Once connected, the LED indicator will flash blue slowly.

Note :
If you want to change to couple mode, simply take out the other earbud from the charging case, they will pair with each other automatically

Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:

1.  If you have paired your device with the earbuds before, remove “TaoTronics Duo Free Pro” from the Bluetooth device list first.
2.  Uncover the lid and make sure both earbuds are placed in the charging case.
3.  Press and hold the Reset Button for 10 seconds until the indicator flashes white three times. The pairing history is then cleared.
4.  Take them out to re-pair with your Bluetooth® device as instructed in the “Pairing” section.

Note :
If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or remove “TaoTronics Duo Free Pro” from its Bluetooth list. Restore the earbuds to factory settings as instructed above if pairing failed.

OPERATION AND FUNCTIONS

Play / Pause

| • Tap the Touch Control on either of the earbuds twice under music

• Put on / take off the earbuds

| ****

/

Volume +| Tap the Touch Control on the

right earbud

| Toots when highest setting is reached
Volume –| Tap the Touch Control on the

left earbud

| /
Next Track| Tap the Touch Control on the right earbud three times| /
Previous Track| Tap the Touch Control on the left earbud three times| /
Answer Phone Call| Tap the Touch Control on either of the earbuds once| /
Hang Up Phone Call| Tap and hold the Touch Control on either of the earbuds for 2 seconds| /
Decline an Incoming Call| Tap and hold the Touch Control on either of the earbuds for 2 seconds| Call rejected

Turn On / Off Ambient Mode

| Only available in Couple Earbuds and Non-call Mode after connecting with phone:

• Tap and hold the Touch Control on the left earbud for 2 seconds to turn on Ambient Mode.

• Limited by mobile protocol, you may experience a short pause when turning on music or sounds under Ambient Mode.

| ****

Toot

Turn On / Off Voice Control

| Couple Earbuds Mode:

Tap and hold the Touch Control on the right earbud for 2 seconds

Single Earbud Mode:

Tap and hold the Touch Control on either of the earbuds for 2 seconds

| ****

Toot

Clear Pairing List| Refer to the “Clear Pairing List” section| /
Go into Pairing Mode| Refer to the “Pairing” section| Pairing
Function| Operation| Voice Prompt
---|---|---
Successfully paired with your device| /| Connected
Bluetooth out of Range / Failed to pair with your device| ****

/

| ****

Disconnected

Note : Only when you are wearing the earbuds can you hear the voice prompt.

CLEANING AND MAINTENANCE

1.  Clean the earbuds and the charging case on a regular basis.

2.  Use dry and soft cotton cloth to wipe the unit.
   Note: Do not insert anything into the product.

3.  Keep away from sharp objects to avoid scratches.

4.  Put the unit in a dry and shady place if it is to be idle for a long time.

5.  Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

1

| Failed to turn on the earbuds| Earbuds low battery, please charge them

2

| ****

Failed to charge the earbuds

| • Place the earbuds into the charging case properly

• Make sure the charging case is fully charged

3

| Can’t charge the charging case| Make sure the charging cable is intact and plugged in properly

4

| ****

Can’t find

“ TaoTronics Duo Free Pro” in the Bluetooth device list

| ****

The earbuds reconnected with previously paired device automatically:

• Deactivate the Bluetooth function of previously paired device or clear “TaoTronics Duo Free Pro” from its Bluetooth device list, and then search again

5

|

Failed to pair the earbuds with your device

| • Turn on the device and activate its Bluetooth function before pairing

• Bring the earbuds into pairing mode as instructed in the “Pairing” section

6

|

No sound in one of the earbuds in couple earbuds mode

| Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them back to the factory settings as instructed in the “Clear Pairing List” section

7

|

Poor sound quality

| • Wear the earbuds properly and keep them close to each other.

• Place the connected device close to the earbuds or remove the obstacles between them

• Clear the debris on the earbuds

8

|

Unstable connection

|

• The effective distance may shorten with obstacles in the way

• Turn off other Bluetooth devices to decrease the interference

9| Can’t hear the other party during a phone call|

Set the volume to higher level

10

| The other party can’t hear your voice during a phone call| Free the built-in microphone of any covers

11

|

Touch Control of the earbuds is unresponsive

| Place the two earbuds into the charging case and cover the lid, disconnect the Bluetooth connection. Uncover the lid to turn on the earbuds and pair again.

WARRANTY AND SERVICE

If any problems occur, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide

References

• TaoTronics Official Site - Technology Enhances Life
• User Manual - TaoTronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>