RBX EWL-21122-OL Wireless Charging Desk Lamp User Manual
- June 5, 2024
- RBX
Table of Contents
RBX EWL-21122-OL Wireless Charging Desk Lamp
Packaging Content
- (1) Desk Lamp
- (1) Charging Cable
- (1) Instruction Manual
The Product
- Wireless charging area
- Brightness button (Down)
- Power button/light temperature mode button
- Brightness button (Up)
- Charging LED indicator
- Power input
Product Specifications
- Compatible with Qi wireless -Operating frequency:
- charging devices 115-205kHz
- Material: ABS + Aluminium -LED quantity: 27pcs
- alloy -CRI: >80Ra
- Power input: 5V/3A – 9V/2A -Center luminance: 800lux
- Wireless charging output -Color temperature:
- power: 10W/7.5W/5W 3000-3200K (warm) /
- Charging distance: 6mm 6500-7000K (white)
- (best on 3.5mm) -LED longevity: 50000hrs
- Efficiency: .73% -Comes with charging cable
Charging Your Smartphone
- Place the Wireless Charging Desk Lamp on a flat surface.
- Plug charging cable (included) into the indicated port to an energy source of at least 5V/3A.
- Place your smartphone onto the wireless area with the backside down. If your device is compatible with the wireless charger, your device will automatically start
charging.
Note: If the LED indicator is blinking red, please check your mobile phone and
make sure that no magnets or metals are blocking the wireless charger.
Using the Lamp
- With the lamp connected to an energy source, press the power button to turn the lamp on.
- Press the power button to cycle through the different light temperatures.
- Select from the following light temperature settings:
- Press once for cold white light.
- Press twice for strong warm light.
- Press again for warm white light.
- The fourth press will turn the LED desk lamp off.
- To adjust brightness, press the Up button to increase brightness and press the Down button to dim brightness.
Safety Instructions
Be careful with your product. The following advice will help you to optimize its life.
-
Keep the product dry. Rain, moisture, and liquids of any kind may contain minerals that can cause corrosion on the circuits. If the product gets wet, use a clean soft cloth or dry-wipe immediately and stop using it. Do not try to dry this product with heat sources such as dryers or microwaves.
-
Do not use abrasive cleaning solvents such as detergent, alcohol, or other cleaning products to clean on this product. Only use a clean, dry, soft cloth to clean the surface.
-
Use the product for its intended purposes only. Improper use or use of incompatible devices may a risk of fire, explosion, or other hazards. Never
use a damaged product. Only use this product indoors. -
Do not try to use this product if any of the internal parts are exposed if the shell is damaged or presents rupture and if the device is not compatible with the wireless charger.
-
Do not try to use or store this product in dusty or dirty places. This will affect the beauty of the product and will reduce its lifetime.
-
Do not try to use and store this product in a high-temperature environment. High temperatures can deform the product and its parts or even melt it.
-
Do not try to store the device in a cold place. Low temperatures can damage the electrical parts of this product.
-
Always avoid extreme temperatures.
-
Do not open, disassemble, compress, bend or fold, puncture, shatter, or submerge this product.
-
Unauthorized modification may damage the product and will violate the relevant provisions of the use of radio equipment.
-
Do not throw, drop, knock, or vibrate this product.
-
Protect this from falls and electric discharges.
-
Rough use of the product will destroy the internal circuit boards and mechanical structure.
-
Do not use other batteries or metals on this product while it is on.
-
You can use protective cases to charge your device on this product, but it may affect its use. This product is compatible with most cases up to 4mm thick.
-
If your case contains metal plates, studs, or magnetic clasps, you must remove the case before placing your phone in the wireless charging area.
-
Medical implants should stay at least 20 cm from this product, or any implants that may be damaged by electromagnetic fields, such as pacemakers.
-
Avoid exposing this product to the sun for long periods.
-
Avoid exposing it to high temperatures, close to ovens, fire, or explosive materials.
-
Always verify the voltage of your charging adapter and its conversion to avoid damage to this product.
-
Pay attention to the output voltage to avoid damage to your device.
-
Do not try to fix, disassemble or modify this product, you may lose the warranty and generate damage to the product. There are no parts that can be repaired by the user.
-
If you do not use this product for long periods, keep it stored in a dry place, far from extreme temperatures, humidity, and dust.
-
Do not use non-certified energy sources or if they are incompatible with the product. This may cause failure as well as fires, explosions, or other damages.
-
This is not a toy. Keep it away from children to avoid accidents. We advise not to let underage children use this product without supervision.
Recycle
Make a conscious discard of this product. Dispose it only on recyclable bins.
Do not dispose of this product in a conventional bin. Contact the local
recycling center to know the best way to dispose of this product. This way you
help to avoid the uncontrolled disposing of residues and promote the
recycling of materials.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator your body: Use only the supplied antenna.
2022© Manufactured by Lifeworks Technology Group LLC. under license from TRB
Acquisitions LLC. New York, NY 10001.
All brands are registered trademarks of their respective companies.
Made in China.
Customer Service: 877-543-3540