KOODUU Lite Up Play Bluetooth Speaker and LED Lamp Instruction Manual

June 5, 2024
Kooduu

lite-up play
www.kooduu.com

KOODUU Lite Up Play Bluetooth Speaker and LED Lamp

Dear customer,
Thank you for purchasing our Kooduu lite-up play. This product complies with the statutory national and European requirements. To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!

The operating instructions are part of this product. They contain important notes on commissioning and handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating instructions for reference! All company names and product names are trademarks of their respective owners. All rights reserved.

Intended use

This Kooduu lite-up play is intended to be used as a lifestyle product. The product serves as a multi-functional speaker and light. Any use, other than described above, can damage the product. Additionally, it can lead to dangers, such as a short circuit, fire, electric shock, etc. No part of this product should be modified or converted! Read these operating instructions completely and attentively: they contain a lot of important information on setup, function, and operation. Always observe the safety information!

Box contents

– Bluetooth speaker and LED light – Operating manual – USB cable

Safety Information

The warranty will expire if the damage is incurred resulting from non- compliance with these operating instructions. We do not assume any liability for consequential damage! Nor do we assume any liability for damage to property or personal injury caused by improper use or failure to observe the safety information. The following safety information is intended not only for the protection of your health but also for the protection of the device. Please read the following items carefully: unauthorized conversion and/or modification of the product is inadmissible for safety and approval reasons.

The product is only suitable for dry areas. Do not expose it to direct sunlight, heat, cold, or moisture for long periods of time; this may cause damage to the product. There is a danger of fire or a potentially fatal electric shock. If this is the case, first power down the respective socket (e.g. switch off the circuit breaker) and then pull the power adapter from the socket. Disconnect all cables from the device. Do not operate the product anymore afterward and contact your local dealer or get in touch with us at httos://www.kooduu.com/return-oolicy/ Do not place any source of an open fire, such as candles, on the device. Handle the product with care. It can be damaged by impact, blows or when dropped even from a low height. Note: the wooden handle and other wooden parts are not water-resistant and need to be kept dry at all times.

This product is not a toy and is not suitable for children. Children cannot judge the dangers involved when handling electrical devices.
Do not leave packing material unattended. It may become a hazard for children.
Also, observe the safety and operating instructions of any other devices that you connect to the speaker.

Product overview

Key functions
Al On/off switch

A2 USB charging port
Charging B1 USB cable

LED indicator
DI Charging LED
D2 Mode LED

Setup mono speaker (single-unit) connection

Step 1 : Before first use, turn off the Bluetooth function of any other Bluetooth device near the speaker.
Step 2 : Hold the on/off button on the unit for about three seconds. You will hear a start-up sound and the blue LED indicator light will flash.
Step 3 : Press the on/off button once.
Step 4 : Now turn on the Bluetooth function on your smartphone and search for lite-up Play among the available devices in your Bluetooth menu and pair with the speaker.
You can now play your favorite music.

Setup stereo speaker connection

Step 1 : Before first use, turn off the Bluetooth function of any other Bluetooth devices near the speakers.
Step 2 : If you have purchased two (2) lite-up play products and wish to pair them, hold the on/off button on the unit for about three seconds on the first unit and repeat on the second unit. You will hear a start-up sound and the blue LED indicator light will flash on both units.
Step 3 : Double press the on/off button on one of the units. (This unit is now set as the LEFT channel speaker). Let the second unit automatically connect to the LEFT channel speaker. You will hear a ‘beep’ once the connection between the second unit and the LEFT channel speaker is successful. The second unit’s blue LED indicator light on the bottom will then turn off. (This unit is now set as the RIGHT channel speaker). The LEFT channel speaker unit’s blue LED indicator light will still be flashing. Step 4: Now turn on the Bluetooth function on your smartphone and search for lite-up play among the available devices in your Bluetooth menu and pair with the speaker. The blue LED indicator light will turn off. You can now play your favorite music.

Connecting to a new device

Step 1 : While the product is turned on and connected to a device, press the on/off button once on any of your lit-up play products.
Once the device has successfully been disconnected from the unit, a tone can be heard, and the unit’s blue LED indicator light will start flashing.
Step 2 : Now turn on the Bluetooth function on your smartphone and search for lite-up play among the available devices in your Bluetooth menu and pair with the speaker.
You can now play your favorite music via the new phone/device.

NOMENTA INDUSTl!U:IM’EINATlQ.IIAt IV
Kanovpo&: 33-2,2011 MR,Hoa1lem.
lh& N&thefl(tnds)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals