OPCOM OFG009 Microgreens Ball User Guide
- June 5, 2024
- OPCOM
Table of Contents
OPCOM OFG009 Microgreens Ball
Installation
- Place the main device on the terrarium by tightening 3 screws
- Plugin the USB cable
- Plug USB adapter to AC power outlet
- Unplug the stopper from the water port
- Use the drop bottle to fill the water into the opening (This step is only for Garden Mode, not recommended for other modes, to maintain the humidity of the moss and ferns)
- Drip the water into the glass terrarium
Planting
Succulents
Moss / Ferns
Aquarium
- Unscrew the device to open the glass terrarium port and set up Aquarium planting
- Plug Bubble tube
- into water filter
- And put it into the water bottom.
- Plug Bubble Tube
- Another end to Air Pump
- And screw device to glass terrarium.
- Plug Power Code type C connector to Air Pump(1) and plug Air Pump(1) type C connector to the device. Press Air Pump(1) button to switch ON/OFF pump>
Control
Main Device Single Button
Remote Control Button
Remarks
- Double press to switch On/Off
- Set up the Wake-up(automatically turns on every day) and Sleeping(automatically turns off every day) modes through the lighting time setting.
- Wake-up time setting: When the light is on, press and hold for 5 seconds until it beeps.
- Sleeping time setting: When the light is off, press and hold for 5 seconds until it beeps.
- One short + One long-pressing the Timer button resets the product to default settings.
Fan setting
Turns off for 5 minutes/hour for the fan’s maintenance
Mode setting
- G Mode: Dedicated to wet plants (fill the water tank with 80ml of water to circulate moisture within the glass terrarium)
- S Mode: Dedicated to both Succulent and Aquarium plants (Do Not fill the water tank with water)
Planting Environment Notification Feel free to visit the OPCOM website
This product is designed for indoor gardening. Without built-in temperature control, our product works best within a temperature range of 18°C~30°C, specifically, 25°C. Except for special plants that naturally grow in higher or lower temperatures, please adjust the air circulating fans once the indoor temperature exceeds the range to sustain the plants’ growth.
Indoor Garden Families
Microgreens Ball
Thank you for your interest in having MicroGreen Ball. Hope you will like it very much. The Microgreens Ball has the conditions for precision planting, including light, air, water, etc. From the succulent plants to the mosses of wetland and aquatic ecology, all that could get sufficient growth conditions in the intelligent mode without the special care. Its automatic mode provides the function of photometric sensing, which is quite suitable for creative placement or hanging in the environment of restaurant, balcony, and indoor garden, and no need to worry about the lack of light at all. The MicroGreen Ball produces fresh air and positive energy every day, as well as the living environment that changes and projects light and shadow with the growth of plants. It provides the automatic On / Off mode. In the early morning, it can be awakened by the Microgreens Ball gradually as the phototherapy to start the beautiful day; and at night, it can also help to fall asleep surrounded by the green landscaping. When several Microgreens Balls are hung alternately up and down, the indoor environment soon becomes a 3D ecological garden immediately, with High Color Accuracy up to Ra90 grow light to display the true color of the garden and floodlight. Now, let’s begin the wonderful planting journey…
-
Standard Accessories
-
Aquarium set (Optional)
-
Hanging set (Optional)
-
Micro landscape toolset(Optional)
-
Hanging set setup: The hanging set can handle a weight of up to 10kg and Win the 3D Sky Garden Art design around the room.
-
Fasten the fixing piece to the ceiling with screws.
-
Place the base on the fixing piece.
-
Use screws to lock the base to the fixing piece.
-
Insert the transformer in the base.
-
Plug the USB power cable into the adapter.
-
Adjust the lanyard to the proper length.