OPCOM Farm OFG001-2 Hydroponic Growing System User Guide

OPCOM Farm OFG001-2 Hydroponic Growing System

Sprouts and Microgreens

Before your next seedling, take advantage of the seedling tray for sprouts and microgreens, it takes 7-10 days to harvest.

1. OPut seeds in warm water(recommended temperature is 95° F, not over 104°F) for 24 hours.
2. Put the wet paper towels into the tray.
3. Place the seedling tray with cover in the shade or cover it with black cloth.
4. After germination, during the growing stage, keep the green sprout under the light and white sprout in the shade or cover it with black cloth; For 7-10 days. you can harvest.

OPERATION

MAINTENANCE

Add Water
Measure the pH value every week and add water to achieve the value balance.

Change Water

1. After a cycle of planting, you should change the water or clean the unit(Fig1 .)
2. When changing water, you can use the water outlet on the left side to leak the water. Plug out plastic lid(Fig2), plug-in water pipe(Fig3), then plug out water tank inside stopper.(Fig4)
3. After draining the water, please wipe off the water tank.

EC / pH Meter Use and Calibration

1. Every time you use the EC/pH Meter, please wash electrodes with regular water and keep it dry.
2. Cover the electrode protective cap when not in use.
3. Turn off the meter when not in use for an extended amount of time.

TROUBLESHOOTING

GrowBoOx2

Thank you for purchasing OPCOM Growox2, the indoor hydroponics growing system. t is designed with easy to th by one-touch AUTO mode. It holds up to 59 plants capacity. Please read the quick guide For a detailed user manual and assembly video, please visit the official Website: http://www.opcomfarm.com user mar.

ASSEMBLY

Hardware
Remove all the parts from the box and check all the accessories

Grow kit

pH adjusters

Nutrition

Assemble GrowBox2

1. Install Rod A at the rear right corner. Insert another 1 Vertical aluminum rod to each corner of the box and follow the arrow on the bar to assemble. Install the top LED Panel and position in the indicated location by
2. following the arrow on the bar.
3. Connect the LED cable to the LED Panel.
4. Put the planting tray into the water tank to complete the assembly.
5. Fill 6.6 gallons/ 25L (80%) water into the box.
6. Connect the adaptor cable to the adaptor.

Chart 1: Control Box Mode

• Most plants can be grown using the AUTO mode.
• The remote controller supports wireless remote control.
• When Power On, press the hold POWER button until 2 beep sound (About 5 seconds) to reset power on the timeline.
• When Power Off, press the hold POWER button until 2 beep sound (About 5 seconds) to reset the power off the timeline.

Seedling

1. Add water to the seedling tray, up to the water (red) level,(Fig1)
2. Second-time sprout: Open Grow Sponge package, put each sponge place into the water of the seedling tray (make sure the front side with the seed label is side up). press the sponges into water 5 seconds and ensure the sponges absorb water completely. Put seed moisturizing cover on the sponges. (Fig2)
3. Place the seedling tray with cover in the shade.(Fig3)
4. Suggest using Watering Spray water to sponges and keep them wet every day.
5. During 0~7 days, find the sprouted ones in the tray; pick them out, and move them into the product (make sure the sponge’s lineup with the black dot on the partition)(Fig4) Different plant may have different germination times, please check before plant.

Chart 2: Plant Stage

Chart 3,4 Electrical conductivity (EC) & pH adjustment instructions

EC Adjustment instructions
pH Adjustment instructions

Growing Stage

1. When plants grow to over 2 inches in height, switch the control box to auto mode. Please refer to Chart 2
2. After 4-6 weeks, harvest the larger plants for consumption and keep smaller plants growing.
3. To save time, sow the new seeds in a sprouting tray one week before you restart the planting process.
4. When water is less than water level(red) on the tank, please refill new water until over water level(red).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>