Delta OHM HD32.3TC Viewing the Data with Deltalog10 Software Instruction Manual
- June 5, 2024
- Delta OHM
Table of Contents
HD32.3TC Viewing the Data with Deltalog10 Software
Instruction Manual
-
Start the DeltaLog10 software.
-
Connect the instrument mini-USB port to a PC USB port by means of the supplied CP31 cable (USB drivers installation is not required).
-
Display the tree of the directories in the main window of the software.
Warning: t he instrument does not require a connection procedure, therefore it is not necessary to press the “Connect” button.
-
Expand the disk drive corresponding to the instrument and select the desired folder.
-
Double-click on the name of the data file.
-
Proceed according to the instructions of the software to analyze the data.
Rev. 1.0 – 03/02/2021
DELTA OHM S.r.l. a socio unico – Via G. Marconi, 5 – 35030 Caselle di
Selvazzano (PD) – ITALY
TEL. 0039 049 89 77 150, FAX 0039 049 63 55 96, e-mail:
[email protected], Web Site:
www.deltaohm.com