PROCHEM B171 Filter Out Spray Instructions

: June 3, 2024
: PROCHEM

Table of Contents

B171 Filter Out Spray
DESCRIPTION
FEATURES
WHERE TO USE
USE DIRECTIONS
ADDITIONAL REFERENCES
Documents / Resources

B171 Filter Out Spray
Instructions

B171 Filter Out Spray

Removes filtration soil lines, toner, carbon soils, soot, and other charged particle soils
FOR PROFESSIONAL USE ONLY
APPLICATION: Spotter

DESCRIPTION

Filtration soils are one of the toughest problems in professional carpet cleaning. Air is forced through the carpet pile at doorways, against walls, and near HVAC vents and registers. The carpet pile acts as a filter for airborne particles, removing them from the airstream. These particles cling tightly to the carpet fibers through electrostatic and mechanical attraction. Over time this can form a tough soil that is a real challenge to remove . . .UNTIL NOW!
Filter-Out removes air filtration soil lines along walls, under doors, and near heating and air conditioning vents, where airborne particles are filtered out and deposited in the carpet pile. Exclusive Prochem formulation technology defeats the particle charge attraction and allows the soil to be extracted away. Solves problems that you couldn’t solve before.
Filter-Out also can remove other types of tough spots, including copier, printer, and fax machine toner spills, carbon-containing soils, carbon soot, and other charged particle soils which are strongly attracted to fibers.

FEATURES

Removes filtration soil lines from the carpet along walls and doorways.
Extracts dry toner spills near copiers, fax machines, laser printers
Rinse-extract with water or Prochem’s All Fiber Rinse solution.
Available ready-to-use in quart bottles with convenient applicator caps.

WHERE TO USE

Residential and commercial carpets with filtration soil lines. Removes dry toner spills near photocopiers, fax machines, and laser
printers. Soot and other dry carbon soils on carpets or hard surfaces.
USE DILUTION: Ready-to-use – No mixing necessary.

USE DIRECTIONS

Pre-vacuum thoroughly to remove loose soil, especially dry toner.
Apply Filter-Out to saturate fibers in soiled areas. Allow 3-5 minutes of dwell time to loosen the soil. Agitate with a soft brush or groomer to help break loose tough spots.
Extract completely using hot water or All Fiber Rinse solution. Repeat if needed.
Lightly brush or groom to align fibers.

USAGE TIPS:

Pre-vacuum toner spills repeatedly to remove as much loose toner as possible before wet cleaning. Use a vacuum hose attachment or a vacuum without a beater bar to avoid spreading toner.
Always rinse-extract to remove soil and residues.
Apply a carpet protector such as FourGuard to restore soil and stain resistance.
Filter-Out is not recommended for use on upholstery fabrics.

Additional tips for spot and stain removal are available in our Tech Tips blog at LegendBrandsCleaning.com

ADDITIONAL REFERENCES

available at LegendBrandsCleaning.com

Cleaning system guides
Product User Guides
Safety Data Sheets
Product labels
Tech Tips blog

Filter Out Technical Data

Boost your skills and knowledge with Legend Brands Education!
Taught by leading experts in the cleaning and restoration industry,
Legend Brands Education courses enhance your knowledge of cleaning and restoration processes and improve your skills and boost your profitability. Courses are hosted online, at distributor locations, and at in hands-on training facilities. For current offerings, visit
LegendBrandsEducation.com or call 800-932-3030.

Sales/Technical Support:800-932-3030
Emergency Hazards Hotline (INFOTRAC): N. Amer.800-838-5053 / Intl. 352-323-3500
PC_FilterOutB171UserGuide_RevA
Legend Brands