PROCHEM S717 Axiom Clean Pre Spray Instructions
- June 3, 2024
- PROCHEM
Table of Contents
PROCHEM S717 Axiom Clean Pre Spray
For Residential & Commercial Carpet and Upholstery Cleaning Removes Spots and Greasy Soils from Traffic Lanes Phosphate-Free, Butyl-Free & VOC-Compliant
PH: 8.5 – 9.0 Ready to Use
FOR PROFESSIONAL USE ONLY
READ ALL INSTRUCTIONS AND PRECAUTIONS BEFORE USING INSTRUCTIONS
For professional use only. See User Guide and SDS found at LegendBrands.com for additional use and safety information. Users are encouraged to attend training sessions offered by Legend Brands Education: LegendBrands.com
Always pre-test surfaces to be cleaned for colorfastness in an inconspicuous location before use. Use according to all label directions. Treat carpet spots directly with Axiom Clean Spotter before hot-water extraction. Pre-vacuum carpet thoroughly to remove loose dry soils.
PUMP SPRAYER: Dilute Axiom Clean Pre-Spray at 4 oz per gallon of water (1:32) for normal soil conditions. For heavier soil, use 6 oz per gallon (1:21).
INJECTION SPRAYER (HIGH PRESSURE 1:8 TIP): Add 1½ quarts of Axiom Clean Pre-Spray to the 5-quart container for normal soil conditions. Fill with water. For heavier soil, use 2½ quarts of Axiom Clean Pre-Spray, then fill with water. Spray traffic lanes, spots, and soiled areas of carpet. Allow 10 to 15 minutes of dwell time, but do not allow carpet to dry. Rinse-extract thoroughly, using Axiom Clean Extraction detergent or Axiom Clean Free Rinse. pH: 8.5 – 9.0 ready to use
CAUTION: Use product only in a well-ventilated area. To avoid skin irritation or slip hazards, do not walk on wet carpets with bare feet.
NOTICE: Product must be stored at room temperature (59°F – 86°F/ 15°C – 30°C). Keep in sealed container when not in use. Product is not warranted if used for repack, improperly stored, or used in a manner not consistent with the manufacturer’s instructions.
WARNING: This product can expose you to ethylene oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Axiom Clean Pre-Spray
Not a dangerous substance or mixture according to the US (OSHA 29 CFR, 1910) Globally Harmonized System (GHS). If any condition(s) persist: Get medical advice/attention. More detailed First Aid measures may be found in Section 4 of the SDS. If any condition(s) persist: Get medical advice/attention. More detailed First Aid measures may be found in Section 4 of the SDS. 10.7% of the mixture consists of ingredient(s) of unknown acute toxicity.
Contains: water (CAS 7732-18-5); sodium citrate (CAS 68-04-2); 2-(2-butoxyethoxy)ethanol (CAS 112-34-5); ethoxylated alcohols (CAS 68439-45-2, 68002-97-1); 1-octanesulfonic acid, sodium salt (CAS 5324-84-5); sodium iminodisuccinate; isopropyl alcohol (CAS 67-63-0); sodium sulfate; aspartic acid, disodium salt; 2-butenedioic acid (E)-, disodium salt; magnesium nitrate; fragrance blend; 5-chloro-2-methyl-4-isothiazolin-3-one; magnesium chloride; 2-methyl-2H-isothiazol-3-one; colorant; copper(II) nitrate; potassium iodate; ethylene oxide; 1,4-dioxane
READ SDS at: LegendBrands.com
Made in U.S.A.
TEL: 1-800-535-5053