LKV488TYPEC 4K 60Hz TypeC Wireless Extender User Manual

User Manual

4K 60Hz TypeC Wireless Extender

• Important Safety Instructions

1. Do not expose this device to rain or place it near water. Any liquid that goes into the device may cause a failure, fire, or electric shock.
2. Never insert anything metallic into the open parts of this device. This may cause a danger of electric shock.
3. The device should be repaired only by a qualified technician.
4. Do not place this device near or over a radiator or heat register, or where it is exposed to direct sunlight.

• Introduction

This is a 4K@60Hz TypeC wireless extender, including a transmitter and a receiver. Adopting ipcolor STREAM technology can realize high definition and low-latency transmission. Based on the 5G wireless frequency band, with stable anti-interference and safety performance. It supports 1-to-1 wireless transmission, and the transmission distance can reach 20 meters, effectively solving problems caused by complicated wiring. It’s an ideal wireless video transmission solution for video conferences, home entertainment, multimedia education, etc.

Note
1) Transmission distances may vary depending on the environment.
2) Signals may be reduced or completely lost by solid structures such as walls, bricks, and glass.
3) The surrounding wireless signal may cause certain interference to the transmission, and the channel can be switched to reduce the interference.

• Features

1. Adopting ipcolor STREAM technology can realize high definition and low-latency transmission.
2. Support up to 3840×2160@60Hz resolution, backward compatible.
3. Support wireless transmission up to 20 meters (line of sight).
4. In case of multiple sets of products in the same area, support SSID pairing and channel switching to avoid interference.
5. Support 5G wireless frequency bands, strong anti-interference.
6. Support firmware upgrade via Micro USB port.
7. Portable design, plug and play.

• Package Contents

Transmitter x1                       Receiver x1

Micro USB cable x1                User manual x1

• Installation Requirements

1. TypeC source device (DVD, game console, PC, etc.)
2. HDMI display device (TV, projector, LED screen, etc.)

• Panel Description

Transmitter (TX)

b) Steady on: connection succeeded
c) Quick flash: SSID Pairing mode
3| Power indicator| The indicator will turn red when the power is turned on
4| Channel switch button| a) press to switch channels
b) Press and hold 5s for SSID pairing
c) Press and hold 10s for restore factory settings
5| Signal indicator| a) Light off: no HDMI signal
b) Steady on: HDMI signal is transmitting
c) Quick flash: restore factory settings
6| Micro USB port| Firmware upgrade

Receiver (RX)

b) Steady on: connection succeeded
c) Quick flash: SSID Pairing mode
3| Power indicator| The indicator will turn red when the power is turned on
4| Channel switch button| a) After connecting with TX, press to switch channels
b) Press and hold 5s for SSID pairing
c) Press and hold 10s for restore factory settings
5| Signal indicator| a) Light off: no HDMI signal
b) Steady on: HDMI signal is transmitting
c) Quick flash: restore factory settings
6| Micro USB port| For power input and firmware upgrade

• Installation Procedures

1. Connection Diagrams

One to one connection

1. Macbook
2. Transmitter
3. Receiver
4. HDMI Display

2. Connection Instructions

a) Connect the transmitter to the TypeC output port of the signal source device.
b) Connect the receiver to the HDMI input port of the display device.
c) Plug the power supply into the devices to get started.

Note: Please connect the Micro USB cable to the 5V 1A wall charger when transmitting 4K video, for long-distance use or when the picture is not smooth.

3. SSID Pairing

1. Enter the SSID pairing mode by holding the transmitter and receiver’s channel switch buttons for five seconds. Both WiFi connection indicators will flash quickly in blue.
2. When the SSID pairing is successful, the WiFi indicators on the transmitter and receiver will change from quick flashing to slow flashing or steady on.

• FAQ

Why the receiver and transmitter cannot be connected, showing “Search ipcolor Tx…” on the screen?

1. Move transmitter and receiver closer.
2. Re-power the transmitter or receiver.
3. Re-pair the transmitter and receiver.

Why the Wi-Fi indicator is steady on but showing “Please check the TX input signal” ?

1. Make sure the TX has TypeC input and that the resolution is within the specified range.
2. Try to connect the signal source directly to the display device, or change the signal source and test again.

Why is the display stuttering or unstable?

1. Place the transmitter or receiver within the signal coverage and minimize obstructions between the transmitter and receiver.
2. Switch to a different channel to avoid interference from other wireless signals.
3. Re-power the receiver or transmitter.

• Specification

RGB),1080P@50/60Hz, 720P@50/60Hz, 1920×1200@60Hz
Input and output TMDS signal| 0.7~1.2Vp-p（TMDS）
Input and output DDC signal | 5Vp-p（TTL）
Transmission| Wi-Fi Frequency bands| 5.18-5.24 GHz
Transmission distance | ≤ 20m
Latency| 100~250ms
Connection types| One to one
SSID pairing| Supported
Protection Level| ESD protection| 1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Operating Environment| Working temperature| -20~50℃
Storage temperature| -30~70℃
Humidity (no condensation)| 0~90% RH
Physical Properties| Dimension| TX: 40.2(W) 230(L) 15.0(H)mm
RX: 40.2(W) 230(L) 15.0(H)mm
Color| Black
Material| ABS
Net weight| TX: 47g; RX: 54g

Disclaimer

The product name and brand name may be registered trademark of related manufacturers. ™ and ® may be omitted on the user manual. The pictures on the user manual are just for reference, The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>