GRANDSTREAM GRP2615 Carrier-Grade HD IP Phone Installation Guide

GRANDSTREAM GRP2615 Carrier-Grade HD IP Phone Installation Guide

The GRP2615 is not pre-configured to support or  carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone don’t do so, it is Your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE GRP2615. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GRP2615 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.

PRECAUTIONS:

WARNING: Please DO NOT power cycle the GRP2615 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.
WARNING: Use only the power adapter included in the GRP2615 package. using an alternative non-qualified power adapter may possibly damage the unit.

OVERVIEW:

GRP2615 is a next generation enterprise IP Phone featuring 10 dual color line keys (can be digitally programmed as up to 40 provision able BLF/ fast-dial keys), 4.3” (480×272) TFT color LCD, 5 programmable context-sensitive soft keys, USB port, 1000M network ports, integrated PoE, Wi-Fi and Bluetooth support, 3-way conference and Electronic Hook Switch (EHS). The GRP2615 delivers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3rd party SIP devices and leading SIP /NGN /IMS platforms. GRP2615 is the perfect choice for enterprise users looking for a high quality, feature rich multi-line executive IP phone with advanced functionalities and performance.

GRP2615 is a next generation enterprise IP Phone featuring 10 dual color line keys (can be digitally programmed as up to 40 provision able BLF/fast-dial keys), 4.3” (480×272) TFT color LCD, 5 programmable context-sensitive soft keys, USB port, 1000M network ports, integrated PoE, Wi-Fi and Bluetooth support, 3-way conference and Electronic Hook Switch (EHS). The GRP2615 delivers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3rd party SIP devices and leading SIP/NGN/IMS platforms. GRP2615 is the perfect choice for enterprise users looking for a high quality, feature rich multi-line executive IP phone with advanced functionalities and performance.

PACKAGE CONTENTS:

PHONE SETUP:

*Installing the phone (Wall Mount sold separately):**

1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab form the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below)

Installing the phone (Phone Stand):

For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. (Upper half, bottom part).

CONNECTING THE PHONE:

To setup the GRP2615, follow the steps below:

1. Connect the handset and main phone case with the phone cord.

2. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 3, this step could be skipped.

3. Network connection is possible via two methods which are described below:
   • Using Ethernet:
   Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
   • Using WiFi:
   – Select “Scan” and GRP2615 will automatically start scanning within the range.
   – A list of WiFi networks will be displayed. Select the desired network, and if required, enter the correct password to connect.

4. The LCD will display provisioning or firmware upgrade information. continuing, please wait for the date/time display to show up.

5. Using the phone embedded web server or keypad configuration menu, you can further confiture the phone using either a static IP or DHCP.

PHONE DESCRIPTION:

PHONE CONFIGURATION:

Configure the GRP2616 using a Web Browser:

1. Ensure your phone is powered up and connected to the Internet.
2. Press and hold the “UP” button for 3 seconds to see the IP address.
3. Type the phone’s IP address in your PC browser.
4. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit).

Configure the GRP2616 using the Keypad:

http://www.grandstream.com/our-products
www.cmspatents.com

U.S FCC Part 68 Regulatory Information

U.S FCC Part 15 Regulatory Information

Canada Regulatory Information

EU Regulatory Information

www.grandstream.com

References

• cmspatents.com
• Grandstream Networks - Networking & Unified Communications
• Products | Grandstream Networks

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>