SONICWALL TZ470W Wireless-AC INTL TotalSecure User Guide

SonicWall® TZ270/TZ270W,
TZ370/TZ370W, and
TZ470/TZ470W
Quick Start Guide

Package Contents

NOTE: The included power cord is approved for use only in specific countries or regions. Before using a power cord, verify that it is rated and approved for use in your location. The power cord is for AC mains installation only. Refer to the TZ270/TZ370/TZ470 Series Safety, Regulatory, and Legal Information document for minimum power cord rating and additional safety information.
Items missing? Contact SonicWall Technical Support at: https://www.sonicwall.com/support/contact-support

Front Panels

The wired and wireless TZs for each model have the same ports and LEDs, except that the wireless TZs have an additional W0 WLAN LED.
Front Panel Ports and LED Descriptions

Yellow = Defective adapter
4| | Test LED: Yellow = Initializing,
Blinking Yellow = SafeMode
5| | Security LED: Green = All Security Services Licensed,
Blinking Yellow = Security Services License Expired
Security Services monitored by this LED:
Gateway Anti-Virus, Intrusion Prevention, Anti-Spyware
6| | Storage LED: Solid Green = Extended Storage module present,
Blinking Green = Activity, Yellow = Storage warning
7| | Wireless W0 WLAN LED (Wireless TZs only) :
Solid Green = Wireless radio is active,
Blinking Green = Activity
8| | LAN/MGMT X0 Port LED: Solid Green = 1G link,
Blinking Green = 1G activity
9| | WAN X1 and X2 Port LEDs: Solid Green = 1G link,
Blinking Green = 1G activity
10| | RJ45 Port LEDs: Solid Green = 1G link,
Blinking Green = 1G activity
11| | SFP/SFP+ Port LEDs (TZ470/TZ470W only):
Solid Orange = 2.5G link,
Blinking Orange = 2.5G activity
12| | U0 WWAN LEDs for USB 5G/LTE:
Green = 5G/LTE signal strength

Back Panels

set the TZ into SafeMode
3| Power Input: 36W 100~240VAC – 12VDC power adapter
4| X0 LAN RJ45 Port: 1 Gbps
5| X1 WAN RJ45 Port: 1 Gbps
6| X2 WAN RJ45 Port: 1 Gbps
7| X3 RJ45 Port: 1 Gbps
8| X4/X5/X6/X7 RJ45 Ports: 1 Gbps
9| SFP/SFP+ Ports X8/X9 – (TZ470/TZ470W only): 2.5 / 1 Gbps
10| RJ45 Console Port

SSD Storage Module – The TZ supports an optional, field-upgradable SSD Storage Module, accessible via a removable panel on the bottom of the appliance. To order, refer to the price list for available SKUs.

Mounting Options

Flat Surface Option
Place the TZ on a flat surface. Allow unrestricted airflow around the unit, leaving a minimum of 1 inch (25.44mm) clearance on all sides.

Connectivity and Power

1. Connect Power
CAUTION: Only use the power adapter included with this appliance. Do not use a power adapter that is damaged or from another appliance.
2. Connect Interfaces
For a wireless TZ, connect the antennas to your TZ.

Setup Options

Setup using Local Management
Set up and manage your TZ by connecting it to a management computer via Ethernet cable.
To minimize scrolling, set your screen resolution to at least 1920 x 1080 pixels.

Setup using Cloud Management
Use SonicWall Capture Security Center (CSC) with Zero Touch to manage and configure your TZ.

Setup using SonicExpress App
Use SonicWall SonicExpress on your smartphone to register and configure your TZ.

NOTE: After initial setup, be sure to download the latest firmware from MySonicWall and upgrade your TZ.

Local Management

1. Connect the TZ LAN interface (X0) to your computer. Your computer should be configured to accept DHCP addressing.

2. Navigate to https://192.168.168.168 in your web browser and log in with the default credentials:

3. Username: admin Password: password

4. Launch the Setup Guide wizard or manually configure it to complete the initial configuration.

5. In SonicOS, click Register and log in with your MySonicWall credentials to register your TZ.
   Your TZ is now initialized and ready for use!

**

**Cloud Management

Use Capture Security Center (CSC) with Zero Touch to manage and configure your TZ.
NOTE: This option requires a Cloud Management license.

1. Log in to CSC at cloud.sonicwall.com using your MySonicWall credentials.
2. Select the SonicWall tile to register your TZ.
3. Enable Zero Touch and NSM licensing on your TZ in SonicWall.
4. Select the Network Security Manager tile in CSC to manage your TZ from the cloud.

SonicExpress App

Use SonicExpress on your smartphone to register and configure your TZ.

1. Download and launch the SonicExpress App on your iOS or Android device.

2. Tap Login and login with your MySonicWall credentials, then select the Tenant for the TZ. Tenants can contain multiple SonicWall appliances.

3. Connect your iOS/Android device to the TZ with the smartphone USB cable (not supplied with the TZ).
   NOTE: Use your mobile device’s USB cable.

4. Use the SonicExpress Setup Guide to register the TZ, synchronize service licenses, change the password, and configure essential interface settings.

Secure SD-Branch

SD-Branch combines SD-WAN, SD-LAN, unified
security, and centralized management for
distributed enterprises. For more information, see:
https://www.sonicwall.com/solutions/use-cases/secure-sd-branch

References

• MySonicWall
• Secure Software-Defined Branch | SonicWall SD-Branch
• Secure Software-Defined Branch | SonicWall SD-Branch
• sonicwall.com/support/contact-support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>