SONICWALL TZ400 Firewall with Total Secure Advanced Edition User Guide
- June 5, 2024
- SONICWALL
Table of Contents
SONICWALL TZ400 Firewall with Total Secure Advanced Edition
view Page online: https://www.sonicwall.com/support/knowledge-base/sonicwall- tz400-wireless-tz400w-out-of-box/170503795770582/
SonicWall TZ400 Wireless (TZ400W) out of box
Description
NOTE: Video Link: SonicWall TZ400 Wireless (TZ400W) Out of Box Video.The SonicWall TZ400 Wireless package includes the following
- SonicWall TZ400 Wireless appliance 3 Antennas
- One Ethernet Cable
- One Power Adapter
- One Power Cord
Quick Start Guide
NOTE: The included power cord is approved for use only in specific
countries and regions. Before using a power cord, verify that it is rated and
approved for use in your location.
Front and Back Views of the SonicWall TZ400W
SonicWall TZ400W Port Descriptions
Cabling the SonicWall TZ400W as a Network Gateway
- Locate the SonicWall ports X0 and X1, port X0 is also labeled as LAN and port X1 is also labeled as WAN.
- Connect your Internet access device such as a cable or DSL modem to SonicWall WAN (X1 port).
- Connect SonicWall LAN (X0 port) to your laptop or PC or to a Network Switch that to which your network devices such as PCs, game consoles, Smart TVs, etc are connected.
- Other ports such as X2, X3þÿ & c a n be a s s I g n t o o t h e r n e t w o r k s .
Cabling Topologies
Option 1
Power On SonicWall TZ400W
- Plug the power cable into an appropriate power outlet (110 – 240 volts).
- Appliance powers on and the orange LED blinks during the boot sequence. This process may take up to 2 minutes.
Access the SonicWall Admin User InterfaceConnect a PC to the SonicWall LAN (X0) interface or a network switch connected to the LAN interface.
- You will automatically receive an IP address from the SonicWall appliance.
- Open a browser to https://192.168.168.168 for access to the SonicWall.
SonicWall TZ400W First time setupSetup Wizard walk through
-
For the first time access as the admin user, you will be offered a choice to use a Setup Wizard or go directly to the SonicWall management Interface.
-
At the Setup Wizard Launch Page, click the Setup Wizard link here. At the Setup Wizard Welcome Page
-
Click Next.
At the Admin Credentials pageThe Admin default login credentials are -
Username: admin
-
Password: password
NOTE: Update the password for the admin user. This is recommended to keep
the admin user secure.
-
Click Next
IP Configuration page -
The WAN Interface will detect for a DHCP server to retrieve its IP configurations.
-
If no DHCP server is detected or if you wish to enter static IP parameters then click on the link Manual Config.
