TAOTRONICS TT-CL023 Smart Nursery Light User Manual

TAOTRONICS TT-CL023 Smart Nursery Light

IMPORTANT SAFETY INSTRUCTIONS

• READ AND FOLLOW
• ALL SAFETY
• INFORMATION AND
• INSTRUCTIONS.
• KEEP FOR FUTURE
• REFERENCE.

When using an electrical appliance, basic precautions should always be followed, including the following:

THIS IS AN ELECTRIC LAMP – NOT A TOY!
TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

• To ensure correct and safe installation, usage and functioning of the product, always follow these instructions carefully and keep for future reference.

• DO NOT place or operate near extreme heat sources, moisture, or corrosive substances.

• Always unplug the light prior to installation, maintenance or carrying out any repair activities.

• Use ONLY the provided USB-C cable and AC power adapter. For enough brightness, ensure an input power of more than
  5V 1.5A.

• DO NOT operate any light with a damaged cord or after malfunction occurs, or damaged in any manner.

• Follow local regulations regarding disposal or recycling of the device and components.

• The luminaire cannot be replaced, please do not dismantle or modify by yourself. Otherwise it will be deemed as waiver of warranty.

• DO NOT remove the power plug with wet hands as it may cause electrical shock.

• If you have any product problems during use, please contact the Customer Support at [email protected]

KNOWING YOUR SMART NURSERY LIGHT

DC 5V 1.5A

Power| Light 3.8W, Speaker 3W
Supported Wi-Fi Protocol| IEEE 802.11 b/g/n 2.4GHz
Supported OS| Android 5.0 or higher

iOS 9.0 or higher

Lumens| 125lm±10%
Color Temperature| 2700K
CRI| ≥80
Operating Temperature| -10°C ~ 40°C
Lifespan| 25000 Hours

USING YOUR SMART NURSERY LIGHT

Control and Functions All of the controls can be customized in the TaoTronics App.

Press Once Long Press

SMART CONTROLLING VIA APP

Connecting with Smart Device

Make sure your device is connected to a secure 2.4GHz network.

Controlling via TaoTronics App

TaoTronics App allows you to control and customize your controls for Smart Nursery Light via your smart device.

CLEANING AND MAINTENANCE

TROUBLE-SHOOTING GUIDE

Related to App / Connectivity

Cannot enter Pairing Mode (Wi-Fi indicator does not flash blue).

• Indicator in Red: Press and hold the Wi-Fi button for 5 seconds until it
  flashes blue to manually enter Pairing Mode.

• Indicator OFF: Short press the Wi-Fi button to turn on, it will enter
  Pairing Mode automatically.

Cannot receive the Verification Code?

• Make sure you have entered a correct Email address for sign up.
• Check if the Email is blocked in the blacklist.
• If still failed to receive after several attempts, please contact TaoTronics Customer Support.

Cannot connect Wi-Fi network/ Wi-Fi connection unstable.

• Make sure your smart device is connected to a secure 2.4GHz network.
• Make sure you have entered a correct Wi-Fi password.
• Place the light within the signal coverage of the router.
• Avoid obstacles such as metal doors and windows, multiple walls, etc.

Cannot connect my light to TaoTronics APP?

• Make sure your phone and light are connected to the same and secure 2.4GHz Wi-Fi network.
• Follow the steps in “Connecting with Smart Device” to try again.

Can I control the light without using the APP?

Yes, the App is for extra features. The light works perfectly fine without connecting to a smartphone.

Related to the Nursery Light

Failed to light up after connecting.

• Make sure the light is connected to an appropriate electrical outlet.

Control panel is not responsive.

• Operate with dry hands.
• Disconnect the power adapter to restart the light.

LED failure or bad smell.

Please contact TaoTronics Customer Support.

THE FOLLOWING TROUBLESHOOTING GUIDE ADDRESSES THE MOST COMMON PROBLEMS. IF PROBLEMS PERSIST, CONTACT THE CUSTOMER SUPPORT AT

WARRANTY AND SERVICE

Thanks for choosing TaoTronics Smart Nursery Light.
This product is covered with TaoTronics product and labor warranty for 12 months from the date of its original purchase.
The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purpose.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by TaoTronics.
  We can only provide after sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

Please have your invoice and order ID ready before contacting Customer Support.

FCC Compliance

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) Thisdevice must accept any interference received, including interference that may cause undesired operation
  RF Exposure Warning Statements:
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

[email protected] www.taotronics.com Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

References

• TaoTronics Official Site - Technology Enhances Life

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>