ABRITES Diagnostics for Hyundai/KIA Online User Manual
- June 5, 2024
- ABRITES
Table of Contents
Diagnostics for Hyundai/KIA Online
User Manual
Important notes
The Abrites software and hardware products are developed, designed, and manufactured by Abrites Ltd. During the production process, we comply to all safety and quality regulations and standards, aiming at the highest production quality. The Abrites hardware and software products are designed to build a coherent ecosystem, which effectively solves a wide range of vehicle-related tasks, such as:
- Diagnostic scanning;
- Key programming;
- Module replacement,
- ECU programming;
- Configuration and coding.
All software and hardware products by Abrites Ltd. are copyrighted. Permission is granted to copy Abrites software files for your own back-up purposes only. Should you wish to copy this manual or parts of it, you are granted permission only in case it is used with Abrites products, has “Abrites Ltd.” written on all copies, and is used for actions that comply with respective local law and regulations.
Warranty
You, as a purchaser of Abrites hardware products, are entitled of a two-year
warranty. If the hardware product you have purchased has been properly
connected and used according to its respective instructions, it should
function correctly. In case the product does not function as expected, you are
able to claim a warranty within the stated terms. Abrites Ltd. is entitled to
require evidence of the defect or malfunction, upon which the decision to
repair or substitute the product shall be made.
There are certain conditions, upon which the warranty cannot be applied. The
warranty shall not apply to damages and defects caused by a natural disaster,
misuse, improper use, unusual use, negligence, failure to observe the
instructions for use issued by Abrites, modifications of the device, or repair
works performed by unauthorized persons. For example, when the damage of the
hardware has occurred due to incompatible electricity supply, mechanical or
water damage, as well as fire, flood or thunder storm, the warranty does not
pply.
Each warranty claim is inspected individually by our team and the decision is
based on a thorough case consideration.
Read the full hardware warranty terms on our website.
Copyright information
Copyright:
- All material herein is Copyrighted ©2005-2021 Abrites, Ltd.
- Abrites software, hardware, and firmware are also copyrighted
- Users are given permission to copy any part of this manual provided that the copy is used with Abrites products and the “Copyright © Abrites, Ltd.” statement remains on all copies
- “Abrites” as used in this manual is synonymous with “Abrites, Ltd.” And all its affiliates
- The “Abrites” logo is a registered trademark of Abrites, Ltd.
Notices:
- The information contained in this document is subject to change without prior notice. Abrites shall not be held liable for technical/editorial errors, or omissions therein.
- Warranties for Abrites products and services are set forth in the express written warranty statements accompanying the product. Nothing herein should be construed as constituting an additional warranty.
- Abrites assumes no responsibility for any damage resulting from the use, misuse, or negligent use of the hardware or any software application.
Safety information
The Abrites products are to be used by trained and experienced users in
diagnostics and reprogramming of vehicles and equipment. The user is assumed
to have a good understanding of vehicle electronic systems, as well as
potential hazards while working around vehicles. There are numerous safety
situations that cannot be foreseen, thus
we recommend that the user read and follow all safety messages in the
available manual, on all equipment they use, including vehicle manuals, as
well as internal shop documents and operating procedures.
Some important points:
Block all wheels of the vehicle when testing. Be cautious when working around
electricity.
- Do not ignore the risk of shock from the vehicle and building-level voltages.
- Do not smoke, or allow sparks/flame near any part of the vehicle fuel system or batteries.
- Always work in an adequately ventilated area, vehicle exhaust fumes should be directed towards the exit of the shop.
- Do not use this product where fuel, fuel vapors, or other combustibles could ignite.
In case any technical difficulties occur, please contact the Abrites Support Team by email at support@abrites.com.
Introduction
Using the Abrites software for Hyundai/KIA Online:
The Abrites software for Hyundai/KIA is an Online application and requires
your computer to be connected to the Internet. We can suggest a connection to
the Internet via 3G/ 4G from a mobile device as well as a WI-FI network.
Please ensure to have port 8443 allowed by your Internet Service Provider in
order to ensure the correct functionality of your Abrites diagnostics for
Hyundai/KIA Online.
Using the icon in the top right of your software screen you will be able to
see the Internet connectivity and signal strength and the three horizontal
lines will allow you to choose a language in which the software to operate:
When you open the Abrites Quick Start you can select the Abrites software for Hyundai/KIA Icon, once you choose it you will have the option to pick the Hyundai Online icon
After clicking the Abrites software for Hyundai Icon you will see the software
startup.
The software will automatically check if your AVDI is connected, and will
check for updates.
Then follow the vehicle detection options, and there are two:
- Enter the VIN of the vehicle, or read it from the car you are connected to
- Manually choose the model you are working on
The model selection goes into a few other steps:
-
Select the vehicle’s area
-
Select the vehicle’s model (here you select a vehicle model and year or production)
-
Confirm the selection
When applicable, you would have to select the vehicle’s engine -
Select the vehicle’s key
The steps can be seen in the pictures below:
Once the vehicle selection is complete, you will be able to start using the special functions of the Abrites software for Hyundai/KIA Online. It has the following functionalities depending on the model:
- Read PIN Code
- Learn Keys
- Program Remotes
- Module Neutralisation
Diagnostic is currently done with the offline software, here you can perform the special functionalities.
Read PIN Special Function
With the use of this special function, you are able to read the PIN Code of a Hyundai/KIA vehicle. The software works in wizard mode, in other words, it is a guided function and there are informative messages on what needs to be done.
Once you press and hold the START button the procedure begins and it guides you through the process.
There are 3 options for how to read the PIN:
-
Read PIN code from the vehicle
This option is used when there are no available keys for the car. -
Read PIN code from working key (requires PROTAG programmer)
This option is used whenever there is a working blade key with a DST80 transponder or HITAG2 for the vehicle. The software lets you know when the PROTAG needs to be connected. -
Calculate PIN code from VIN (for vehicles manufactured until 09/2007)
Learn Keys Special Function
This special function lets you program mechanical and smart keys to Hyundai vehicles. It is a wizard function, which guides you through the process and provides informative messages on what needs to be done
Following the on-screen directions, the procedure comes to the point where a PIN code is needed. If the PIN is already known, there is an option to manually input it, if not, the procedure would continue with the PIN code reading. There are also two options for that – read it from the vehicle, or read it with the use of a working key and a PROTAG programmer, just as in the Read PIN code special function.
Once the PIN code is present, the wizard function will guide you through the
whole procedure until it is finished.
Key learning serves as module synchronization when a user module is
neutralized or new modules are installed in the car.
Program Remotes Special Function
This special function is another guided function, dedicated to saving transmitter codes for vehicles equipped with mechanical keys.
Module Neutralization
When module neutralization is already chosen, you would have to pic the desired option. There are currently two neutralization methods, which are explained below.
Standard Neutralization
The Hyundai Online software is able to do module neutralization, which is a
very useful functionality when it comes to module exchange and adaptation. In
order for a second-hand (donor) module to be adapted to a car, it needs to be
neutralized. Modules that can be neutralized with the use of Abrites Online
software for Hyundai are ECUs, immobilizers, and smart systems. HK009 license
is required.
The Neutralization function allows the use of second-hand modules in
Hyundai/Kia vehicles.
For vehicles with a smart key:
-
neutralization (allowing adaptation in other vehicles) of the smart system
-
neutralization (allowing adaptation in other vehicles) of the ECU
-
neutralization (allowing adaptation in other vehicles) of the ESC
-
neutralization (allowing adaptation in other vehicles) of the PDM (for vehicles equipped with PDM)
For vehicles with a mechanical key: -
neutralization (allowing adaptation in other vehicles) of the immobilizer – this automatically neutralizes the ECU as well
-
neutralization (allowing adaptation in other vehicles) of the Smart module (for vehicles that are equipped with one)
Neutralization is done in the vehicle that the module belongs to because for ECUs the PIN code is required. If a second-hand ECU is purchased off the Internet, the task would be more difficult. Our new development (HK010 special function) comes in very handy in such cases.
ECU Neutralization on the bench (HK010 special function)
ECU Neutralization without the need for a PIN code.
Our new development for Hyundai/KIA lets you neutralize an ECU with a bench
connection without the need for a PIN code(The PIN code will be required for
the adaptation only). This function works for all ECUs (excluding those with
integrated immobilizers). HK010 license is required.
In case the immobilizer is integrated into the ECU, the PIN code needs to be
read and this is done with the other neutralization method explained above.
There are 2 ways you can make the connection – with and without the use of a
box.
In fact, an option for the older version of DSbox is also included.
The software gives warning messages to remind you to check the connections,
and where connection diagrams can be found.
Wiring
There are two connection methods – one is using the DS box and the other is a
direct connection to the ECU, without the use of the DS box.
-
Wiring with ZN051 DS box
When using ZN051 for connection to the ECU, the following connections should be made:
CB401 Yellow cable (B+) < – > B+ of the ECU
CB401 Orange cable (IGN) < – > IGN of the ECU
CB401 Black cable (GND) < – > GND of the ECU
K7 socket (green cable from the ZN051 set) <-> K-Line of the ECU (also called Data signal cable) -
Wiring without ZN051
12V (external power supply) < – > B+ of the ECU as well as the AVDI (pin 17 of the DB25or pin 16 of the CB100 OBD cable)
12V (external power supply) < – > key switch < – > IGN of the ECU (a key switch should be connected between the 12V power supply and IGN pin of the ECU)
GND (external power supply) < – > GND of the ECU and GND as well as the AVDI(pin 5 of the DB25or pin 6 of the CB100 OBD cable).
K-Line of the AVDI (PIN 7) < – > K-Line of the ECU(also called Data signal cable)
A key switch (sometimes called a lock switch) is a key-operated switch. Key switches are used in situations where access needs to be restricted to the switch’s functions.