SPEKTRUM SPMXSEMC18 Firma 1:24 Scale Brushless ESC Motor Combo Instruction Manual

SPEKTRUM SPMXSEMC18 Firma 1:24 Scale Brushless ESC Motor Combo

NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discre-tion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhob-bies.com and click on the support or resources tab for this product.

MEANING OF SPECIAL LANGUAGE

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:

WARNING : Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.

NOTICE : Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will provide warranty service related thereto.

SPECIFICATIONS

ESC Specifications SPMXSE1008

Motor Specifications SPMXSM3900

Compatibilty

Axial models equipped with the 4-Channel 2.4Ghz surface transmitter (HRZ00014) and the ESC/receiv-er, 2.4Ghz, EC2 (HRZ00015) are not compatible. The SLT3 3-channel transmitter (SPMSLT350) with SLR300 receiver (SPMSLT300) are recommended for use in Axial vehicles

Gearing
The included motor has the proper pinion gear already installed for use in the Axial SCX24. How-ever, it is best to monitor the system’s operating temperature when you are operating on new sur-faces and in different environments. Your system’s operating temperature should never exceed 160°F (71°C). The best place to monitor the system’s temperature is at the center of the end bell. If the temperature is higher than 160°F (71°C) after a 5 minute run, the gearing should be lowered (change to a smaller pinion gear).

CAUTION: Once the battery is connected to the system, stay clear of the rotating shaft and pinion gear. Failure to do so could result in personal injury.

Installing the System

Always ensure the mounting screws are long enough to properly seat into the motor. However, ensure the screws do not enter into the motor too far, which could cause damage. The maximum depth that the mounting screws can enter into the motor is approximately 0.79 in (2mm). We suggest using the mounting hardware included with your vehicle. The use of screws that are too long will damage the system and void any warranty. When installing the motor into your vehicle, it is very important that the gear mesh is correct and smooth with no binding. The vehicle’s motor mounts usually feature adjustable slotted mounting holes so that you can adjust the gear mesh properly. Proper gear mesh (how gear teeth meet) is important to the performance of the vehicle. When the gear mesh is too loose, the spur gear could be damaged by the pinion gear of the motor. If the mesh is too tight, speed could be limited and the system will overheat. Insert a small piece of paper in between the pinion and spur gears as you are installing them. Push the gears together while tightening the screws that mount the system. When the mesh is at the correct distance, remove the small piece of paper by rotating the spur gear until the paper comes out. Check the mesh at multiple points around the larger spur gear before finalizing the motor mounting position

Connecting the Motor to the ESC

1. The Firma 8A sensored brushless ESC only supports the Spektrum sensorless brushless motors. This ESC cannot be paired with any other type of motor. These Spektrum motors cannot be used with any other type of ESC.

2. There is strict wiring order from the ESC to the motor. The three A/B/C ESC connections must connect to the three A/B/C motor wires correspondingly. Connect ESC Terminal A to Motor Terminal A (blue); ESC Terminal B to Motor Terminal B (yellow); and ESC Terminal C to Motor Terminal C (orange). Unlike sensorless ESCs and motors, you cannot change the wiring order with a sensored ESC and motor
   NOTICE : Never change the order of your motor wires or damage will occur.

3. Connect the small 5-pin sensor wire to the ESC and motor. Note that one the sensor wires is white. Line the white wire up with the dots next to the ports on the ESC and motor.
   NOTICE : Always disconnect the battery from the system when you have finished operating your vehicle. The system’s switch only controls power to the receiver and servos. The system will continue to draw current when connected to the battery, resulting in possible damage to the battery through over-discharge

Quick Start Guide

The quick start setup guide will get you running quickly using the component’s default settings

1. Mount the system in the car.
2. Connect the system’s receiver lead to the throttle channel on your receiver.
3. Bundle any excess wire lengths with zip ties.
4. Ensure that the system switch is OFF.
5. Connect a fully charged battery to the system.

Ensure all wiring connections can be reached prior to mounting. Use double- sided foam tape to secure the switch to a convenient location in the vehicle.

NOTICE : Always disconnect the battery from the system when you have finished operating your vehicle. The system’s switch only controls power to the receiver and servos. The system will continue to draw current when connected to the battery, resulting in possible damage to the battery through over-discharge

System Calibration Procedure

Ensure proper system function by calibrating the system to your transmitter inputs.

1. Power on the transmitter. Ensure that the throttle is not reversed, the throttle trim is at neutral and the throttle range is set to 100%. Disable any special functions such as AB#, etc.
2. Keep the throttle at neutral and power on the ESC.
3. The motor creates 2 sets of tones and the ESC LED flashes twice at the same time indicating the system is calibrated and ready to use.

System Programming
The system is pre-programmed at the factory and is not user adjustable

Troubleshooting Guide

or replace battery
Ensure all connections are secure
Repair or replace system switch or system
Ensure system programming for battery is correct for your battery
System turns in the wrong direction| Ensure throttle is not reversed

System stops

| Ensure system programming is correct for voltage and battery
Ensure battery is fully charged
Disconnect battery and let system cool
Ensure system programming is not causing overheating
Replace gearing
Ensure gearing is not causing overheating

System accelerates irregularly

| Replace with a high-power battery
Replace battery
Replace damaged wiring
Adjust or replace gearing
System does not turn continuously in response to throttle| Ensure good reception between transmitter and receiver
Replace system

Steering servo operates but the system does not run

| Ensure all system programming matches your installed systems requirements for safety|
---|---|---
Ensure all receiver connections are correct and secure|
Test the system apart from the vehicle system and replace system as needed|
Recharge or replace batteries|
Ensure all system connections are secure|
Adjust throttle travel or other throttle settings on the transmitter and the system|
Steering and system do not function| Ensure all connections to receiver are correct and secure|
Refer to manufacturer’s instructions to repair or replace transmitter|
Recharge or replace batteries|

Vehicle does not operate at full speed

| Recharge or replace batteries|
Ensure system programming is correct for voltage and battery|
Adjust transmitter settings, such as trim, throttle travel, etc.|
Ensure ESC settings are correct for system|
Calibrate throttle control to system|
System slows but will not stop| Adjust transmitter settings, such as trim, throttle travel, etc.|
Ensure system settings are correct for system|
Calibrate throttle control to system|

Decreased transmitter range

| Repair or replace system antennas|
Repair or replace damaged motor, wiring and electrical parts|
Move receiver or adjust antenna location so that no metal parts are between the antenna and the transmitter|
Recharge or replace batteries|
Refer to receiver and transmitter manufacturer’s instructions to adjust reception or change to a free and open radio frequency|

1-Year Limited Warranty

What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.

What is Not Covered
This warranty is not transferable and does not cover .

1. cosmetic damage,
2. damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance,
3. modification of or to any part of the Product,
4. attempted service by anyone other than a Horizon Hobby authorized service center,
5. Product not purchased from an authorized Horizon dealer,
6. Product not compliant with applicable technical regulations, or
7. use that violates any applicable laws, rules, or regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRAN-TIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE. Purchaser’s Remedy—Horizon’s sole obliga-tion and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement deci-sions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDEN-TAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modifica-tion or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law—These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services—Your local hobby store and/or place of purchase can-not provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Sup-port representative. Inspection or Services—If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a ship-ping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection.

Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby. com/content/service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.

NOTICE : Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements —For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service —Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non- warranty service estimates will be billed a minimum of ½ hour of labor. In addi-tion you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/service-center_render-service-center.

Warranty and Service Contact Information

Country of Purchase| Horizon Hobby| Contact Information| Address
---|---|---|---

United States of America

| Horizon Service Center (Repairs and Repair Requests)| servicecenter.horizonhobby.com/ RequestForm/|

2904 Research Rd. Champaign, Illinois 61822

USA

Horizon Product Support (Product Technical Assistance)| productsupport@horizonhobby.com
877-504-0233
Sales| __websales@horizonhobby.com __
800-338-4639

FCC Information

Supplier’s Declaration of Conformity Spektrum Firma 1:24th Scale Brushless ESC/Motor Combo (SPMXSEMC18) This device complies with part 15 of the  FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates,

CAN ICES-3 (B)/NMB-3(B)
This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science, and Economic Development Canada’s license-ex-empt RSS(s). Operation is subject to the following uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Compliance Information for the European Union
EU Compliance Statement: Spektrum Firma 1:24th Scale Brushless ESC/ Motor Combo (SPMXSEMC18): Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: 2014/30/EU EMC Directive; RoHS 2 Directive 2011/65/EU; RoHS 3 Directive – Amend-ing 2011/65/EU Annex II 2015/863.
The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/support- render-compliance.

EU Manufacturer of Record: Horizon Hobby, LLC 2904 Research Road Champaign, IL 61822 USA EU Importer of Record: Horizon Hobby, GmbH Hanskampring 9 22885 Barsbüttel Germany WEEE NOTICE: This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable

References

• bies.com - bies Advertising Resources and Information.
• RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
• RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
• Ferngesteuerte Flugmodelle, Autos, Trucks, Hubschrauber, Boote und Fernsteuerungen | Horizon Hobby
• Horizon Hobby Service Center
• RC Cars, RC Trucks, RC Airplanes, Model Trains, and Slot Cars at Tower Hobbies
• RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
• RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
• RC Cars, RC Trucks, RC Airplanes, Model Trains, and Slot Cars at Tower Hobbies
• RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>