PESTWIZARD PWT600 Marmorated Stink Bug Instructions
- June 1, 2024
- PestWizard
Table of Contents
PESTWIZARD PWT600 Marmorated Stink Bug
How to Assemble a Pest Wizard® Bugs on the Window Trap
- Peel release strip of the window side of trap to reveal a thin strip of adhesive that will adhere to glass.
- Position the trap at the bottom of the window. Press against glass firmly.
- Peel release paper off the room side of trap to reveal the adhesive.
- Replace trap when it becomes saturated with insects. NOTE: when trap is removed, no residue will remain on glass.
- (Small Bugs on the Window only) If using optional Trap Coverup, fold paper on the scored lines on each end. Bend the stiffener bar ends outward and attach it to the inside center of the Coverup as shown. Attach the Coverup to the window by pressing the folded ends on the edges of the adhesive trap.
Curious Cat? Place trap out of reach, so they don’t knock off the Coverup or get their hair stuck in the trap adhesive. Small window? Just trim the trap to fit!
ABOUT COMPANY
Read User Manual Online (PDF format)
Loading......