globe GB24034 LED Portable Luminaire User Guide
- June 5, 2024
- globe
Table of Contents
Thank you for selecting Globe as your smart home solution. With proper care,
this product will provide years of pleasure and enjoyment.
SMART SHOP LIGHT
Check out the installation video on our website: globe-
electric.com/smart
WHAT’S IN THE BOX
SPECIFICATIONS
- LED Shop Light with the double integrated tube.
- Length – 4 ft (l.2 m}
- 42 Watts & 4000-lumen output
- Adjustable CCT 2000 – 5000K
- 120Volts
- 50,000 life hours
- Dimmable through the Globe Suite app
- ON/OFF Pull Chain
- Linkable up to 4 units
- 5 ft (1.5 m} power cord
- Operating Temperature: – 20°C- 40°C
- Suitable for damp locations
| Part | Description | Quantity |
|---|---|---|
| AA | 4 ft (1.2 m) fixture | 1 |
| BB | 12.5-inch (32 cm) hanging chains | 2 |
| cc | Mounting screws (for the flush mount) | 3 |
| DD | Drywall anchor (for the flush mount) | 3 |
| EE | Cable tie | 1 |
TOOLS REQUIRED
FOR YOUR SAFETY
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Please read these instructions carefully prior to installation. Failure to
follow any of these instructions could void product warranties. Globe Electric
assumes no responsibility for claims arising out of improper or careless
installation.
CAUTION:
120V 60Hz. 0.39A 42W FOR INDOOR OR DAMP LOCATION ONLY
Do not install close to flames or flammable gases. Keep away from children. Do
not install on an unstable surface/position.
Do not stare directly at the light while it is on. To prevent the unit from
falling, install the base unit tightly with an anchor.
MAINTENANCE:
Ensuring the lamp is kept clean will optimize performance.
Most electrical accidents are caused by carelessness or ignorance. If you
combine a basic knowledge of electricity, a healthy respect for it, and a dose
of common sense, you can safely tackle many household electrical repairs. Here
are some basic guidelines for working with electricity:
Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
Always work with enough light to see what you are doing; it’s easy to make
mistakes when you’re working in dim light. When in doubt about the safety of
any electrical repair or test, call in a professional.
CAUTION STATEMENTS:
CAUTION: Read the instructions carefully and save them. Failure to
install and wire fixtures or install in accordance with all applicable
electrical codes, as well as specific U.L./ETL safety standards for the
intended working environment (location/application), may cause serious
personal injury, death, and/or property damage. This product must be installed
by a person familiar with the construction and operation of the product and
the hazards involved.
SAFETY INFORMATION
WARNING: LED modules are integrated to the fixture and are not removable
or replaceable.
WARNING: Ensure the electricity to the wires you are working on is shut
off. Either remove the fuse or turn off the circuit breaker.
CAUTION: For use only in 120V/60HZ circuits. Risk of electrical shock.
This device is intended for indoor use. Do not use where directly exposed to
water.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment. This Class B digital apparatus complies
with CAN ICES-005(8).
IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Never use an extension cord unless the plug can be fully
inserted. Do not alter the plug.
CAUTION STATEMENTS:
RF EXPOSURE:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENCE-EXEMPT RADIO APPARATUS:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: {l) the device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
CAUTION: Use the hook to support the chain, not the electrical cord.
FCC Responsible Party:
Globe Electric
1.888.353.1388
15302 Shoemaker Ave.
Norwalk, CA 90650
www.globe-electric.com
WARNING STATEMENTS:
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
NOTICE: Power cord length is 5ft.
NOTICE: Connect up to a maximum of 4 shop lights.
WARRANTY STATEMENT
LIMITED WARRANTY: This light is warranted to last 2 years from the date of purchase based on the use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the light, proof of purchase, and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
INSTALLATION
A. Suspension mounting -with Hanging chains
-
Mount ceiling hooks (not provided) to the ceiling (fig. 1). The spacing between hooks should be 47.8 in {121.4 cm)
-
Attach the S-hook at the end of the hanging chain (BB) to the hanger in the shop light (fig. 2). Secure S-hook openings by closing them using pliers (not provided) (fig. 3). Repeat this step on the other side of the fixture.
-
Attach the hanging chains (BB) to the ceiling hooks (not provided) (fig. 4). Ensure, the ceiling hooks are properly fastened into the ceiling to prevent the fixture from falling.
-
Plugin the power cord to an electrical outlet, or to additional shop lights (fig. 5). 5. Attach the power cord to the hanging chains (BB) with the cord cable tie (EE; fig. 6).
NOTICE: Connect up to a maximum of 4 shop lights.
INSTALLATION (CONTINUED)
B. Surface mounting
-
Install two drywall anchors (DD) and mounting screws (CC) on the mounting surface. The spacing between the mounting screws (CC) should be 47.16 in (119.78 cm). Do not tighten fully. The spacing between the mounting screws head and mounting surface should be 0.18 – 0.20 in. (0.46 – 0.51 cm).
-
Align the keyholes on the shop light (AA), with the mounting screws in the mounting surface (fig. 7). Once the screw heads are through the large ends of the keyhole, slide the fixture until the heads of the screws slide into the narrow ends of the keyholes.
-
Insert an additional drywall anchor (DD) and mounting screw (CC) in the mounting surface at the end of the light fixture to prevent it from accidentally sliding off the screw heads (fig 8).
-
Plugin the power cord to an electrical outlet, or to additional shop lights.
CONNECTING INSTRUCTIONS
| Let’s get started!
•Download the Globe Suite™ app from the App Store or Google Play to your
mobile device.
•Launch the Globe Suite™ app.
•To register, enter your mobile phone number or email address. Create a
password, then log in to the app. OR
•Login if you already have an account.
---|---
| Verify your network
•Verify your network and ensure your mobile device is connected to a 2.4 GHz
Wi-Fi channel.
• Consult your router documentation for detailed instructions on how to change
wireless settings.
| Add a device
• Power on your smart shop light.
• Once plugged in, the Shop light should be flashing rapidly.
• If it is not flashing rapidly, turn the shop light ON/OFF 3 times through
the pull chain.
• Select the”+” symbol on the top right-hand corner.
•Select your product type and follow the instructions within the app.
• If the connection fails, try using AP mode.
Add a device: AP mode
•On the “Add a device” page select AP mode on the top right-hand corner and
follow the instructions within the app.
• You’re good to go!
| Set up voice assistance
• Instructions in the Globe Suite™ app:
Select “Profile”, select “INtegration”, choose your voice assistant, and
follow instructions.
Did you know?
Most modern routers are dual-band meaning they support both 2.4 GHz and 5 GHz
channels. The most common wireless options are:
Mixed: The router will broadcast both 2.4 GHz and 5 GHz simultaneously
under the same SSID. The device will choose which to connect to based on
multiple variables (congestion, distance to the router, etc.).
2.4 GHz : Broadcast only on this channel.
• 5 GHz: Broadcast only on this channel.
• Dual 2.4 and 5 GHz using Separate SSIDS : The router will broadcast both
channels and the user manually decides which to connect to.
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions, or wish to offer us
your valuable feedback, you may contact us in the following ways:
Toll-Free Telephone: l-888-S43-1388 (North America Only) /Toll-Free Fax:
1-800-668-4562 (North America Only)
E-Mail: info@globe-electric.com I Mail:
Globe Electric Customer Service Department
lSO Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www
.globe-electric.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>