PROFI COOK PC-FW 1173 Professional Mincer Instruction Manual

PROFI COOK PC-FW 1173 Professional Mincer Instruction Manual

Instruction Manual

Thank you for choosing our product. We hope you will enjoy using the appliance.
Symbols in these Instruction Manual
Important information for your safety is specially marked.
It is essential to comply with these instructions in order to avoid accidents and prevent damage to the appliance:

WARNING:
This warns you of dangers to your health and indicates possible injury risks.

CAUTION:
This refers to possible hazards to the appliance or other objects.

General Notes

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this appliance to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged This appliance is not fit for commercial use.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it
• The appliance and the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be
• Use only original spare parts.
• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:
Do not allow small children to play with the foil. There is a danger of suffocation!

Special Safety Instructions for this Appliance

WARNING: Risk of injury!

• Before replacement of accessories or additional parts which move during operation, the appliance must be switched off and cut off from the mains.
• Do not touch moving parts.
• Before changing accessories, wait until the knife has come to standstill.
• Before switching on, make sure that the accessories attachment has been installed correctly and is seated securely.

WARNING: Risk of injury!

• Always use the supplied tamper. Never insert your fingers or tools into the filling neck!
• Handle the knife with the necessary care when taking out and cleaning it!
• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• Do not repair the appliance by yourself. Always contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance shall not be used by children.
• Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
  use of the appliance in a safe way and if they understand the hazards involved.

CAUTION:

• Do not immerse the appliance into water for cleaning. Please follow the instructions as stipulated in the chapter “Cleaning”.
• Do not break up hard items such as bones or shells.
• Do not manipulate safety switches.
• Use this appliance only for the processing of food. The abuse for any other purposes may result in injury.

Unpacking the Appliance

1. Remove the appliance from its
2. Remove all packaging material such as plastic films, filler

material, cable ties and cardboard packaging.

3. Check the content for any missing
4. In the event that the packaging content should be incom- plete or if damages are noticeable, do not operate the Return it to the dealer immediately.

Overview of the Components / Scope of Delivery

• Filling tray
• Switch ON / / R (Forward / Off / Return)
• Function switch ON / R (On / Return)
• Motor
• Screw
• Spiral housing
• Tamper

Illustrations A – C

• Spiral
• Knife
• 3 perforated disks (fine, medium, coarse)
• Plug
• Sausage attachment
• 2-part “Kebbe” attachment

Intended Use

This appliance serves

• Cut up
• You can shape noodles or dough with different attach- ments. It is intended for the use in private households and similar applications. It may only be used in the manner described in these oper-
  ating instructions.
  You may not use the appliance for commercial purposes.

Use for any other purpose is considered improper and not for the intended purpose and can result in damage to prop- erty and personal injury.
The manufacturer shall not be liable for damages caused by not intended use.

Notes for Use

• Do not mince any hard objects, such as bones or
• Cut the meat into 2.5 cm pieces. Ensure that there are no bones or tendons in the
• To shred the meat coarsely, use the disc with the largest
• In a second step, select the disc with the finer or centre Depending on how finely you want to shred the meat.
• Before you start, lightly coat the sieves with vegetable fat.
• If you mince meat, place a container under the
• With the help of the “Kebbe” attachment (13) tubes of meat or dough can be

Making Sausage

• You can use both natural and synthetic
• If you have opted for a natural casing, soak this casing some time in water before using it.
• Tie a knot at one end of the
• Slide the casing over the sausage
• Feed the sausage meat through the sausage attachment and fill the sausage
• Make sure that the sausage meat is “loosely” stuffed into the casing as the sausage expands in volume during cooking or frying and may cause the casing to burst
• When the first sausage reaches the desired length, squeeze the sausage at the end of the sausage attach- ment together with your
• Turn the sausage once or twice around its own
• Until you have established some exercise routine, you can turn off the appliance after each sausage

Preparation

Please see the overviews on pages 3 and 4.

1. Open the fixture for the spiral housing with the screw (5) on the
2. Place the spiral housing (6) with the filler neck facing up- wards into the spiral drive and turn the screw clockwise until it is
3. Place the filling tray on to the filler neck in such a way that the fixture for the tray is above the motor
4. Push the spiral (8) into the horizontal section of the spiral housing until the axle locks in

Assembly of the accessories is described by the following sections. Prepare the mincer according to your require- ments.

Assembly of the Meat Grinder

• Please also observe our illustrations under “A” (Page 4).
• Please follow points 1 to 4 as described under “Prepa- ration”.

5. Insert the knife with the sharpened edge outwards onto the shaft of the
6. Select a perforated disc (10). Use the recesses to do
7. Rotate the catch

More details can be found under “Electrical connection” & “Operation”.

Assembly of the Sausage Attachment

• Please also observe our illustrations under “B” (Page 4).
• First proceed as described under “Preparation” and “Assembly of the Meat Grinder”, points 1 to

7. Position the sausage attachment on the spiral
8. Rotate the catch

More details can be found under “Electrical connection” & “Operation”.

Mounting of the “Kebbe” Attachment

• Please also observe our illustrations under “C” (Page 4).
• Please follow points 1 to 4 as described under “Prepa- ration”.

5. Position the 2-piece Kebbe attachment on the shaft of the Use the recesses to do so.
6. Rotate the catch

More details can be found under “Electrical connection” & “Operation”.

Electrical Connection

1. Check whether the mains voltage that you want to use, corresponds with that of the You will find the information about it on the rating plate.
2. Ensure that the function switch is set to “ ” (Off).
3. Only connect the appliance to a properly installed safety socket.

Switch Functions

Function Switch ON / R (On / Return)

Use the switch (3) to select the desired operating mode for the switch (2).

Switch ON / / R (Forward / Off / Return)

The appliance is equipped with a forward and return function. If the scroll should block, you can use the return function, in order to release it.

Forward

• Turn the switch (3) to “ ON ”.
• Turn the switch (2) to “ ON ”. The appliance is in the “Forward”

Return

• Turn the switch (2) to “ ” nd wait until the motor

stops.

• Turn the switch (3) to “ R ”. Press “ R ” on the switch (2). The appliance will be in the “Return” mode as long as you keep the switch pressed

Switching Off

• Move the switch (2) to “ ” and pull the power

Operation

1. Put the pieces of meat (meat paste / sausage mass or dough) on the filling tray and into the filler
2. Stuff, if necessary, the meat respectively the dough with the tamper (7).

Ending Operation

1. Disconnect the power plug.
2. Disassemble all parts of the meat
3. Clean the parts used as described under “Cleaning”.

Cleaning

WARNING:

• Always pull the power supply plug before cleaning and wait until the appliance has cooled down.
• Never immerse the motor assembly in water for cleaning. It could result in an electric shock or fire.
• The blade of the meat grinder is sharp! There is a risk of injury! Proceed carefully when disassembling, cleaning and assembling the individual parts.

Motor assembly

• Only wipe the motor assembly with a damp cloth and dry with a dry cloth

Filling tray, spiral, spiral housing and all accessories

• These parts can be cleaned by hand in the wash
• Rinse with clear water and dry the

Storage

• Clean the appliance as Let the accessories dry completely.
• We recommend that you store the appliance in its original packaging when it is not to be used for a longer
• Always store the appliance at a well ventilated and dry place outside the reach of
• Regularly coat the steel discs with vegetable

Troubleshooting

the socket with another appliance.
Plug in the mains plug

correctly.

Check the main circuit

breaker.

The appli-

ance is faulty.

| Contact our service centre or a specialist.
The function switch (3) is set to “ R ”.| Set the function switch to

“ ON ”.

The appliance is blocked.| Meat residue is sticking to the spiral.| 1.   Set the switch (2) to “ ” and wait until the motor has stopped.

2.   Set the function switch

(3) to “ R ”.

3.   Press “ R ” on the switch

(2) to loosen the blocked

meat residue.

4.   Switch the appliance off and pull the power plug.

5.   Now remove any sticking

residue.

Technical Data

Model:………………………………………………………..PC-FW 1173
Power supply:……………………………….220-240V~, 50/60Hz
Nominal power consumption: …………………………………650W
Maximum power consumption:……………………………..2000W
Sound pressure level: ………………………………………..84dB(A)
Protection class:……………………………………………………….. Ⅱ
Net weight: ………………………………………………. approx. 5.2kg
The right to make technical and design modifications in the course of continuous product development remains reserved.
This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.

Disposal

Meaning of the Symbol “Dustbin”
Protect our environment; electrical appliances do not belong in household waste.
Use the collection points for the disposal ofelectrical equipment and submit your electrical and electronic equipment to these points that you will no longer use.
You help reduce the potential impact of incorrect disposal on the environment and human health.
You contribute to recycling, and other forms of recycling of electrical and electronic equipment. Information concerning the disposal of appliances can be obtained from your local or municipal authorities.

Read More About This Manual & Download PDF:

References

• Proficook Startseite

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>