Marshall CV-MICRO-J2 Micro Joystick Remote Controller Instructions
- September 9, 2024
- Marshall
Table of Contents
Marshall CV-MICRO-J2 Micro Joystick Remote Controller
All functions are controlled with the CV-MICRO-J2 in three modes
1. Pan & Tilt
2. Zoom & Focus
3. Menu Scroll & select
The modes are changed with the touch-down switch on the joystick. You can
either tap the switch or hold down the switch.
A tap is less than 0.5 second
A hold down is more than 0.5 second
The joystick powers up in Pan & Tilt mode. To toggle between Pan & Tilt mode
and Zoom & Focus mode, just tap the joystick switch.
To enter Menu, Scroll mode, hold down the joystick switch. Then use the
joystick to navigate the menu.
To exit Menu, Scroll mode, hold down the joystick switch.
Connections
DC jack: 12 – 35v
XLR4: on a flying lead. This has both power & data for a remote head.
There is a connector on the PCB inside which can be used to connect a Remote
Camera Panel or other equipment into the system. When data is being received
the LED will flash.
Note : Not all functions apply to all camera models. Check camera specifications for applicable functions.
Function List
Home Menu
Pan & Tilt Control
Tap
Zoom Focus Menu
Zoom & Focus
Hold Down
Menu Scroll
- Joystick up/Down to Scroll
- Joystick Left/Right to change value
Head Functions
- Pan Gear
- Tilt Gear
- Josytick Ramp (Ramp up & Ramp down together)
- Head Select 1 – 32
- Preset Store
- GoTo Preset
- Tally On/Off
- Set Home
User Setup
- Change Head ID.
- Reset Head to Factory
- Calibrate Joystick
- Head Reverse. Pan/Tilt directions, Swap Iris & Focus, reverses Zoom and Focus directions
- Select Camera Model – Marshall / Dreamchip
- Camera Format – HD/4K, 24/25/29.95/50/60, i/p etc.
- Reset ALL Heads to ID #01
CCU Functions
- Iris – Auto / Manual / Adjust
- Gain
- Shutter
- Dynamic Noise Reduction (DNR
- Detail
- Gamma
- Master Pedestal (MPED)
- White Balance – Push, Manual, Full Auto White, 3/k2, 5k6
- Red Gain
- Blue Gain
- Auto Focus On/Off
Note : Not all CCU functions are available on all cameras. Check camera
data sheet for available functions.
Further CCU functions are available but require a Remote Camera Panel. Ask
your dealer or visit website for details.
www.marshall-usa.com
Tel : 800-800-6608
support@marshall-usa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>