SIIG 5338509 Auto Clamping Wireless Charger Mount User Manual

SIIG 5338509 Auto Clamping Wireless Charger Mount

What is included:

Features:

• A car holder with a wireless charging function charges your phone conveniently when driving.
• Advanced gravity sensor system, automatically opens and clamps your phone onto the mount.
• Power output 5W/7.5W/10W, compatible with all phones with QI standard.
• Full 360 degrees rotation for perfect viewing angle.
• Start charging once as the phone contact the holder, no need for cable anymore.
• Fix foot support to fit any size of the phone, much more convenient for use.
• QC 3.0 USB car charger included so you can start charging readily, with over-temperature, over current, and over voltage muti-safety protection.

Compatible devices:

• Work well with: iPhone 11/11 Pro/11 Pro Max / iP XS Max / NOTE 8 / 9 / iP XR / 8P / iP XS / iP X / S8 / S9 / iP 8.
• Also, work with all other Qi-enabled devices.
• Qi disabled devices with a wireless receiver or wireless charging case. （Require receiver compliant with WPC Qi standard to match).

Parameters:

Gravity Sensor Wireless Charger Holder

Product specification:

Wireless holder

Input voltage| DC 5V/9V
Input current| 2A
Output power| 5W / 7.5W / 10W
Frequency| 115-205KHZ
QC 3.0 car charger

Input voltage| DC 12-24V
Output Current| 5V 3A, 9V 2A, 12V 1.5A

LED Mode:

Charge complete

| For iPhone: Red light keeps on.

For Samsung: The indicator light turns blue

Attentions:

• Please use the product correctly according to the instructions
• Please do not disassemble the product or throw it into fire and water, to avoid leakage caused by an electrical short circuit
• Please do not use the wireless charger in high temperature, wet, corrosive environment, to avoid leakage caused by damaged circuit
• Please do not put wireless chargers close to cards with magnetic stripes or chips (ID card, credit card etc.) to avoid demagnetization
• Please keep the wireless charger at least 20 CM distance away from implantable medical devices (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences
• Please do safekeeping, do not let your kids treat wireless chargers as toys to avoid unwanted accidents
• The pictures only supply the reference, please take the actual product as the standard
  

**Attentions:

**

1. Insert the adjuster into the ball joint adapter.
2. Insert the ball into the socket at the back of the bracket and tighten.
3. Insert the mount directly into the car air vent blade, and set the locking switch to the proper position
4. Connect the cable head to your charge holder.
5. Connect the other end to car charger, then insert the car charger to the car cigar lighter.
6. The clips will open automatically when you touch the touch-sensitive switch on the left and right.
7.  After the phone has been placed in the holder, the clamps close automatically and start charging.
8. The clips will open automatically when you touch the touch-sensitive switch left and right, take your phone away ]
9. The clamps close automatically

FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC RF exposure statement:
The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>