Shenzhen Zeri E Commerce B5019 150ft Bluetooth LED Strip Lights Kit User Manual
- June 5, 2024
- Shenzhen Zeri E Commerce
Table of Contents
Shenzhen Zeri E Commerce B5019 150ft Bluetooth LED Strip Lights Kit User
Manual
Instructions
Installation
- a. Open the package and spread the strip straight.Please check whether the strip light appearance and all parts are in good condition. Then power the strip light to test whether it could light normally.
- b. Clean the surface of the object where the strip needs to be installed and keep it dry.Any dust and liquid will affect the stickiness of adhesive. The surface where the light adhere must be smooth and clean, otherwise the strip lights will fall oft
- c. Tear off the adhesive tape,paste the strip on the correct place at once time. Press the strip firmly from the beginning to the end to remove the air from the strip and the surface of the object. (Notice: Do not move the strip light to other place after it is attached.)
- d. Considering the gravity of the strip light themself and other influence,you can place a clip to each section of the strip light to reinforce it. If there is a corner, place the clips on each side of the right angle
- e. The installation is over, please connect the power with strip light. You can switch the light on/off and choose the color effect using the control box or remote or APP. Enjoy your new strip light!
Test
Clean
Paste
Press firmly
connect
Light up
Use
a. APP control
-
CAPP name is “Keepsmile” . Please search for and install the application in Google play and Apple store or via the QR code on the manual/controller.
-
Connecting power with the device to let the light on first, then open the blue tooth of your smart phone.
-
Then strip lights automatically connect to the APP If you have any questions about the use of the APR you can refer to the Setting-Guide in the upper right corner of the APP interface
Note: IOS 8.0 or Android 4.3 or later edition required. Your smart device should support bluetooth 4.0 or later version.
Functions are listed as fillows:
- Color: /gust the color and brigheness,16 million kinds of colors fo your choice
- Music: Wheiyou play the music,the light strip will sync with the music and change the color and flashing speed;
- Rhythm:Bui It-in high-sensitivity microphone,the light strip will change the color and speed according to the volume of sound source and the speed of speaking;
- Scene:Multiple modes to choose from,including strobe, static,gradual,fade.You can choosr the right mode according to the atmoaphere;
- Timer:Set the timer,the light will turn on/off according to your schedule.
b. 44 keys Remote control
Warning
- Please pay attention to anti-static during the installation and use of the product. Do not use sharp objects to touch the product, and avoid contact with strong chemicals such as strong acid and alkali.
- There is no hidden nail or metal conductive object in the contact part between the lamp and the wall. If there is,remove or avoid the conductive object in advance to prevent unnecessary short-circuit of the led light strip.
- The working voltage of the lighting is 100-240V, please do not make the working voltage of the lighting exceed the maximum allowable range. Please do not exceed the length more than 32.8ft on each port connection
Customer Service
We are looking forward to provide the perfect services for you,and will pay
attention to your feedback.
Should you have any question,please give me the letter via
Support004@keepsmile.vip
Thank you for purchasing our products,
please read the instructions carefully before use Keepsmile is a brand
dedicated to the development of high-end Led light strips. The company is
equipped with a professional Led light strips development team and production
plant.
Keepsmile·s products will deffnitely add a lot of fun to your life. We are always striving to provide customers with quality products and the most satisfactory service.
WARNING
- The battery case and receiver do not immerse in water.
- The LED sriip light kit do not immerse in fire
- Childern unde age of 16 should use this product adult supervision
Specifications
| LED type | 5050 RGB |
|---|---|
| LED quantity | 270PCS |
| Output power | 36W |
| Input voltage of adapter | AC100v-240v |
| Output voltage of adapter | DC 24V |
| Remote distance | within 5M |
Packing List
| 50ft LED Strip Lights | 1 |
|---|---|
| Controller Box | 1 |
| 44-KEY IR remote Control | 1 |
| Power Adapter | 1 |
| Instruction Manual | 1 |
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>