OUKITEL C22 C Series Most Affordable Cutting-Edge Phone User Guide
- June 5, 2024
- OUKITEL
Table of Contents
C22
C Series
Most Affordable Cutting-Edge Phone
Smart Phone
Overview
|
---|---
Accessories
Battery
C22 includes an internal battery.
When overheated by microwave ovens, stoves, radiators, batteries may explode.
Warning
- Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
Basic parameters
Display:
Operating system:
Processor:
GPU:
RAM:
ROM:
Battery:| 5.86″HD+
Android 10
4*ARM Cortex-A53
IMG PowerVR
4GB
128GB
4000mAh
---|---
Camera
Rear Camera
13 MP+2 MP+2 MP
Front Camera
8 MP
Connection (I/O)
2G: B2/3/5/8
3G: B1/2/5/8 (European version) 3G:B2/4/5 (American version)
4G: B1/3/7/8/20/38/40 (European version)
4G: B2/4/5/7/12/17(American version)
SIM card slot: Micro + TF / Micro + Nano
FM:87.5 MHz -108 MHz
Other Features
Video: AVI, MP4, WMV, RMVB, MKV, MOV, ASF, RM, FLV
Audio: AAC/AAC+/AMR/AWB/MP3/WMA/VORBIS/FLAC/APE
Image: JPEG, BMP, GIF, PNG
Dimensions
Height: 150.5mm
Width: 73.7mm
Thickness: 8.9mm
Weight: 178g
Package contents
1USB Cable
1Multi-language Manual
1Charger
1Warranty card
1*SIM Card pin
Comes with the Google™ app and Google Chrome™.
Android is a trademark of Google LLC
MANUFACTURER NAME: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20
DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW
DISTRICT, SHENZHEN CHINA
Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD
Smart Phone
Model number: C22
Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version USB 2.0
- Adapter shall be installed near the equipment and shall be easily accessible.
- The plug considered as disconnect device of adapter
- The device complies with RF specifications when the device used at 5mm form your body
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Smart Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters,
and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be avoided. Body-worn
Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
FCC ID: 2ANMU-C22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>