SENA 50 Series 50S Motorcycle Bluetooth Communication System User Guide
- June 5, 2024
- Sena
Table of Contents
SENA 50 Series 50S Motorcycle Bluetooth Communication
RIDE CONNECTED
The 50S takes a trusted design and makes major upgrades in both hardware and software. With Mesh Intercom™ technology, it’s time for an all-new experience of riding connected.
- Bluetooth® 5.0
- Multi-Way Intercom
- Mesh Intercom™ up to 2 km (1.2 mi)*
- Intercom up to 2 km (1.2 mi)*
- Audio Multitasking™
- Multi-Language Voice Command
- Support Siri and Google Assistant
GETTING STARTED
Icon Legend
- TAP the specified number of times
- Press and hold Press and Hold button Dial for the specified amount of time
- ROTATE ROTATE Rotate Jog Dial clockwise (right) or counterclockwise (left).
- ROTATE Jog Dial clockwise (right) or counterclockwise (left).
- Rotate while Pressing Jog Dial clockwise (right) or cou clockwise (left).
How to Use This Guide
The legend and callouts are here to help you read the illustrations. New
technology can be confusing, but we’ve created a simple way to perform actions
using illustrations.
Buttons
Product Details
Installation
Mesh Intercom Antenna
Pull the Mesh Intercom Antenna outwards slightly to unfold it.
Downloadable Sena Software
Download the SENA MOTORCYCLES App at Google Play Store or App Store.
Download the following items at sena.com
Firmware
Sena Device Manager
- Firmware upgrade
- Device configuration setting
Quick Start Guide, User’s Guide
NOTICE
- This Quick Start Guide (Version 2.0) explains how to operate the 50S with firmware version 2.0 or higher.
- For the operation of the 50S with a firmware version lower than 2.0, refer to the 50S Quick Start Guide (Version 1.0.1).
Basic Operations
Checking the Battery Level
Instructions are for when powering the headset on
Visual Method
Phone Pairing
- Select 50S in the list of Bluetooth devices detected.
- For more information on phone pairing, refer to the User’s Guide.
**Mobile Phone
Siri and Google Assistant
**Activate the Siri or Google Assistant Installed on Your Smartphone
**Music Controls
Mesh Intercom™
**When Mesh Intercom is enabled, the 50S will automatically connect to nearby
50S users and allow them to talk to each other by pressing the Mesh Intercom
Button.
Open Mesh™
When Mesh Intercom is enabled, the headset will be in Open Mesh (default:
channel 1) initially. Users can freely communicate with each other in the same
Open Mesh channel.
Channel Setting (Default: Channel 1)
If the Open-Mesh communication experiences interference because other groups
are also using channel 1 (default), change the channel. You can select from
channels 1 to 9.
Group Mesh™
Group Mesh is a closed group intercom function that allows users to join,
leave, or rejoin a group intercom conversation without pairing each headset.
Up to 24 users can all be connected in each private group.
Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Enter into Mesh Grouping to create a Group Mesh.
The headsets complete Mesh Grouping and automatically switch from Open Mesh to Group Mesh.
Joining an Existing Group Mesh
One of the members in an Existing Group Mesh can allow new members in Open
Mesh to join the Existing Group Mesh.
Joining an Existing Group Mesh One of the members in an Existing Group Mesh can allow new members in Open Mesh to join the Existing Group Mesh.
The headsets complete Mesh Grouping. The new members will hear a voice prompt as their headsets automatically switch from Open Mesh to Group Mesh.
Reset Mesh
If a headset in an Open-Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh Intercom.
Bluetooth Intercom
Up to three other people can be paired with the headset for Bluetooth intercom
conversations. Intercom Pairing There are two ways to pair the headset.
Using the Smart Intercom Pairing (SIP) SIP allows you to quickly pair with your friends for intercom communication by scanning the QR code on the SENA MOTORCYCLES App without remembering the button operation.
- Pair the mobile phone with the headset.
- Open the SENA MOTORCYCLES App and tap (Smart Intercom Pairing Menu)
- Scan the QR code displayed on your friend (B)’s mobile phone.
- Your friend (B) can display the QR code on the mobile phone by tapping > QR code ( ) on the SENA MOTORCYCLES App.
- Tap Save and check that your friend (B) is paired with you (A) correctly.
- Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends (C) and (D).
Using the Button Two-Way Intercom
Ambient Mode
FM Radio
Configuration Menu
Troubleshooting
QUICK REFERENCE
Power on / Power off
Volume up / Volume down
Ambient Mode
Answer phone call
End phone call
QUICK REFERENCE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>