Therabody B09QVQTQ9G RecoveryAir JetBoots Foot and Leg Air Massage Boots User Guide

Therabody B09QVQTQ9G RecoveryAir JetBoots Foot and Leg Air Massage Boots

1. To get started, put your boots on and get into a comfortable position.
2. Once ready, turn ON the RecoveryAir JetBoots integrated pump, by pressing the power button.
3. After your boots are ON and have automatically paired, you can adjust the pressure and time settings directly from the integrated pumps before your treatment begins. More settings can be made from the Therabody app.(If your boots are not automatically paired, see section Troubleshooting on page 8.)
4. Use your JetBoots at the same time as a pair or independently of each other.

Prepare your treatment

1. After turning on and pairing your RecoveryAir JetBoots, you are ready to choose your program settings.
2. Access two preset program options when connected to the Therabody app: Recover and Warm-up.
3. Once you have chosen your desired program, use the Pressure button to adjust the pressure setting.
4. Then, toggle through the time options using the Time button, to set your desired treatment time (20min, 40min, 60min, or continuous).
5. Once you have selected the treatment options that are right for you, press start, relax, and you’ll be on your way to recovery in no time.

Feature Callouts

Smart Features
The RecoveryAir JetBoots also connect to the Therabody app via Bluetooth, giving you control of your session from the convenience of your smartphone.
Not only can you easily access the Recover and Warm-up treatment options, but you can also adjust the pressure and time.

RecoveryAir JetBoots Programs

About negative gradient for all programs:

The RecoveryAir JetBoots’ unique true negative gradient of pressure sequentially travels up the limb from the foot toward the heart in four internal overlapping chambers. The spiraling overlap of chambers safely maximizes circulation.

• The pressure can be the same in two consecutive chambers, but the pump won’t allow a back chamber to have a higher pressure than a front chamber.
• The minimum pressure level of each chamber is 20 mmHg.

Recover and Warm-Up preset programs

• Access the Recover and Warm-Up preset programs via the Therabody app.
• The Recover program is the perfect go-to when experiencing fatigue, tension, or soreness brought on by your everyday activities or post-workout.
• The Warm-Up program is recommended for use before a workout.
• The only difference between the two programs is the default pressure level and treatment time.

Sequential inflation cycle
Both the Recovery and Warm-Up preset programs use the Sequential inflation cycle.

• A directional massage is applied, starting at the base of the treated area, and progresses upwards towards the torso and then releases.
• Starting with Chamber 1, once the inflating chamber has reached its preset pressure level, the pressure level for that chamber is held and the next chamber begins inflating.

Charging the RecoveryAir JetBoots

You can use your JetBoots while they are charging. Also, you can charge one of the boots at the time directly with the power adapter.

1. After turning off the integrated pump, locate the power charging port found at the front right side of the foot of the boot.
2. Connect one side of the splitter to the charging port.
3. Do the same for the second boot.
4. Connect the other end (female end) of the splitter to the power adapter and connect the other side to a wall power outlet.
5. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Superior, hygienic design
It’s important to take proper care of your RecoveryAir JetBoots compression boots because the longer they last, the longer you will feel the benefits. Each boot has non-porous medical-grade material that helps fight bacteria and provides a resistant surface. Our internal overlapping chambers provide a smooth surface to clean, this means no wiping under chamber flaps where bacteria can build up. This also means, no smells.

How to Clean
Here are simple steps to cleaning your RecoveryAir JetBoots:

1. Unzip the boots completely and lay them on a flat surface.
2. Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil-based cleaning products.
3. Once you have cleaned your garment, make sure to fully dry the surface by hanging them up or wiping them down.
4. We also recommend you wipe down the exterior of the pump to reduce surface contaminants. Avoid using sprays or soaking wet wipes on the back of the pump due to the air vents. Clean with caution.

What it is and why it’s important:
We use medical-grade material covering the internal chamber to help reduce the potential for microbial growth and moisture retention. Whether you are an individual or a clinic, our boots are designed to help limit the potential for bacterial transmission.

Traveling with your RecoveryAir JetBoots

The RecoveryAir JetBoots’ components are all packed into a sleek, compact design for on-the-go recovery, making traveling even more convenient.
When traveling with your RecoveryAir JetBoots, we recommend:

• Pack your boots, including the integrated pump, in the provided carrying pouch and simply fold to fit into your travel bag or carry on luggage.
• The integrated pump eliminates the need to pack the pump separately.

Important Safety Information

Read all instructions before using the RecoveryAir JetBoots for the first time.

Warning

• This system is intended for use by people in good health. This system is not recommended for people who have heart problems, or vascular problems, have a condition requiring the use of any medical device or have any condition that may affect their normal well-being.

• If you are, or maybe, pregnant, consult with your physician before use.

• Do not use this system over insensitive or numb areas, or in the presence of poor circulation. Do not use if you have been diagnosed with blood clots, deep vein thrombosis or phlebitis.
  This system should not be used over swollen or inflamed areas or skin eruptions. Do not use in the presence of unexplained calf pain.

• Consult your physician prior to use.

Safety Warnings and Precautions

• Explosion Hazard: Do not use the RecoveryAir JetBoots in the presence of flammable gases, including flammable anesthetics.
• Electric Shock Hazard: Do not allow liquid to enter any part of the RecoveryAir JetBoots pump. Do not immerse in water or liquid. To clean, follow the instructions found on page 5.
• Electric Shock Hazard: To prevent electric shock, do not open the pump. Do not attempt to service the pump yourself. All repairs should be performed only by Therabody trained and authorized service personnel. Service by unauthorized personnel will void any warranty.
• Stop using the system if there is any change in RecoveryAir JetBoots’ performance.
• Do not modify any part of the RecoveryAir JetBoots.
• The RecoveryAir pneumatic compression system includes small parts that could cause choking in children.
• Keep away from children and pets.
• Do not inflate the garment without wearing it over the intended body area or with open zippers. Doing so can damage the garment.
• Do not apply excessive force to the garment straps. Do not use the straps for any purpose other than intended by the manufacturer. Use of excessive force and/or misuse shall void the manufacturer’s warranty.
• Do not stand or walk while wearing the garment.
• Disconnect the pump from the electrical outlet before cleaning and let it dry completely before reconnecting it to the electrical outlet.

Important Safety Information

Caution

• Do not operate the RecoveryAir JetBoots while operating a vehicle.
• Do not store or transport the RecoveryAir JetBoots beyond the specified temperature, humidity, and atmospheric pressure range.
• Do not use the RecoveryAir JetBoots beyond the specified temperature range: 10 to 30°C (50 to 86°F).
• Do not use the RecoveryAir JetBoots beyond the specified humidity range: 30%rH–75%rH, noncondensing.
• Only use the RecoveryAir JetBoots up to 3000m above mean sea level.
• To prevent any damage to the RecoveryAir JetBoots, keep it away from dust, lint, and dirt. Keep away from sources of heat or moisture.
• To prevent any damage to equipment, use only accessories, detachable parts, and materials described in this User Manual.
• While in use, place the pump on a horizontal firm surface only. Do not place the pump on a bed, blanket, mattress, pillow, or soft furniture. Do not cover the pump.
• The equipment is to be installed and put into service according to the EMC information provided in Chapter 11 – EMC Manufacturer Declarations.
• Portable and mobile RF communication equipment might affect the equipment.
• For indoor use only.
• Use only the DC power adapter provided with the pump.
• The massage sensation should be pleasant and comfortable. If you experience pain or discomfort during or after the massage or if there is onset of bruising or irritation during or after the massage, discontinue use and consult your physician.
• Do not hand or machine wash. Surface wipe only.
• Do not allow liquid to get into the air inlets.
• Do not use bleach.
• Do not dry clean.
• Do not wring, iron, tumble, or force heat dry.

Labels

The following labels and symbols appear on the pump, garments and/or packaging

Indications for Use

RecoveryAir is indicated for the temporary relief of minor muscle aches and pains, and for the temporary increase in circulation to the treated areas in people who are in good health. RecoveryAir simulates the kneading and stroking of tissues by using an inflatable garment.

NOTE:

• The pump is “multi-voltage” and can be used for travel.
• An appropriate socket adapter must be used in countries with incompatible wall outlets.
• Use only RecoveryAir garments with the RecoveryAir pump.
• When immediate garment deflation is necessary, disconnect the garment hose bundle from the pump to immediately deflate the air pressure in the garment.

Troubleshooting

Storage environment:

• The pump can be transported or stored for short periods of time within:
  • Temperature range of -4 – 158°F (-20- 70°C)
  • Humidity range of 10-93% RH non-condensing • Atmospheric pressure range of 190 – 1060hPa
  • Allow the pump to reach a reasonable room temperature of 50 – 86°F (10 – 30°C) before operating.
• When the system has been stored in extreme temperature conditions of -20°C (-4°F) or 70°C (158°F) between uses, wait for two (2) hours before using it again.

Radiation Exposure statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

• MedWatch Online Voluntary Reporting Form
• U.S. Food and Drug Administration
• Therabody | World-Leading Wellness Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>