Therabody RecoveryAir PRO System Gen 1 User Guide

Therabody RecoveryAir PRO System Gen 1

Get the most out of your RecoveryAir PRO pneumatic device

• Mode/Menu button
  Used to access the selection of a program, treatment pressure, treatment time, cycle mode, release time, and hold time.

• Up and Down buttons
  Used to select a program, treatment pressure, treatment time, cycle mode, release time, and hold time.

• Start/Stop button
  Used to start or stop treatment.

• Power Switch
  Used to turn On/Off the RecoveryAir PRO Pneumatic Device.

• DC Adapter Socket
  Used for connecting the DC power adapter.

• LCD Display Screen

  •  Displays pressure setting at the most distal pressure zone.
  •  Pressure may be increased or decreased from this home screen.
  •  Displays treatment time setting, which decreases during treatment.

Using the RecoveryAir PRO Pneumatic Device

• Place the RecoveryAir PRO Pneumatic Device on a flat stable surface and insert the DC power adapter cable into the DC adapter socket on the device.
• Put on the garment.
• Connect the garment hoses to the RecoveryAir PRO Pneumatic Device by holding the device handle with one hand while connecting or disconnecting the hose bundle with your other hand.
• Insert the Blocker Plug to block the unused air outlet for single garment use.
• Select the Treatment Program.
  • From the Home screen, press (✓) to select the desired program.
• Set Treatment Pressure.
  •  Press (✓) repeatedly until the desired program screen appears.
  •  Press and hold (✓) until the Pressure value screen is displayed.
  •  Press (✓) until the highlighted pressure value blinks.
  •  To select Pressure, press (▲) or (▼).
  •  To confirm a selection, press (✓).
• Set Treatment Time
  •  Press (✓) until the highlighted Time value blinks.
  • To select Time, press (▲) or (▼).
  • To confirm a selection, press (✓).
• Set Hold Time
  •  Press (✓) until the highlighted Hold value blinks.
  •  To select Hold, press (▲) or (▼).
  •  To confirm a selection, press (✓).
• Set Release Time
  •  Press (✓) until the highlighted Release value blinks.
  • To select Release, press (▲) or (▼).
  • To confirm a selection, press (✓).
• Set Gradient
  • Press (▼) and press (✓) on the word Gradient.
  •  Press (✓) until the selected zone blinks.
  • To select the specific zone pressure, press (▲) or (▼).
  • To confirm a selection, press (✓).
  •  Repeat the above steps for all zones.
• Start the treatment

Charging the RecoveryAir PRO Pneumatic Device

• Turn On the Power Switch to enable charging the battery.
• Turn Off the Power Switch to conserve battery power when not charging or not using the RecoveryAir PRO Pneumatic Device.
• Battery level is continuously displayed by the battery status indicators.

Using your mobile app via Bluetooth connectivity

• Modify treatment parameters
•  Cycle mode
•  Treatment time
•  Treatment pressure
•  Hold time
•  Release time
•  Zone pressures
• Retrieve usage history from the device
• Start or stop the device using your smartphone

References

• Therabody | World-Leading Wellness Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>