Therabody AIRBDL-MP2-PKG-US RecoveryAir Pneumatic Compression System User Guide
- June 5, 2024
- Therabody
Table of Contents
Therabody AIRBDL-
MP2-PKG-US RecoveryAir Pneumatic Compression System
Get the most out of your RecoveryAir Pneumatic Device
-
Battery Status
-
Start/Stop button
Use to start or stop a massage. To pause a massage, press start/stop and hold for 3 seconds. Press start/stop again to resume. -
Status indicator
- Power is on
- Massage in progress
- Error indication
-
Time button
-
Air outlet
-
Pressure knob
Light – 20 to 30 mmHg Medium – 40 to 60 mmHg Intense – 70 to 100 mmHg
Using the RecoveryAir Pneumatic Device
- Place the RecoveryAir Pneumatic Device on a flat stable surface and insert the DC power adapter cable into the DC adapter socket on the device.
- Put on the garment.
- Connect the garment hoses to the RecoveryAir Pneumatic Device by holding the device handle with one hand while connecting or disconnecting the hose bundle with your other hand.
- Set massage pressure by pressing and holding the Pressure Knob while setting the desired pressure. The recommended pressure for first-time users is 40mmHg.
- Press the Time button to set the massage time by 15min, 30min, 45min, 60min or continuous mode.
- Select the Hold Time by holding down the Time button
- Shorthold – press for three sec. (1 beep)
- Medium hold – press for three more secs. (2 Beeps)
- Long hold – press for three more secs. (3 Beeps)
- Start the massage
Charging the RecoveryAir Pneumatic Device
- Turn On the Power Switch to enable charging the battery
- Turn Off the Power Switch to conserve battery power when not charging or not using the RecoveryAir Pneumatic Device
- Battery level is continuously displayed by the battery status indicators
| Battery Status | Displayed Icon | Available Power |
|---|---|---|
| Constant bars | 100% | |
| Constant bars | 75% | |
| Constant bars | 50% | |
| Constant bars | 25% | |
| Blinking bar | Almost empty | |
| No bars | Empty |
Air Outlet
Connects the garment hoses to the RecoveryAir Pneumatic Device.
Blocker Plug
Use Blocker Plug when only one garment is in use.
Storage and Transportation
- Keep the RecoveryAir Pneumatic Device, hoses and garments away from direct sunlight.
- Store in a dry, shaded place.
- Do not twist or fold the garment hoses.
- Store the power cord lightly wrapped and secured.
Cleaning Instructions
- Wipe clean using a slightly damp cloth.
- Do not allow any moisture or liquids to enter the RecoveryAir Pneumatic Device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>