MG5 Wireless Charger User Manual

June 5, 2024
MG

MG5 Wireless Charger

Wireless Charger

User Manual

Thank you for choosing MG wireless charger!

  • Please read this instruction carefully for correct and safe use.
  • Be sure to read the “Precautions for use” before using it
  • Please keep this brochure for future reference.

Precautions for use

Please be sure to comply
In order to avoid possible injury and financial loss to yourself or others, please pay attention to the following safety precautions.

Prohibited behavior

Don’t operate while driving.
Be sure to stop in a safe place and operate with the parking brake on, otherwise it may lead to an accident.

Don’t place the car remote control key within 15cm of the product.
Too close distance will affect the vehicle to find the key, and thus affect the normal work of the car body.

Don’t place magnetic storage media and precision machines In the charging area during charging.
The magnetic force will cause data such as credit cards and ETC cards to disappear.
In addition, watches and other sophisticated machines may fail.

Medical device manufacturers recommend that Implanted medical devices be kept away from wireless devices.
To avoid potential interference with medical devices, follow the instructions of manufacturers of implantable medical devices, such as pacemakers, implanted cardioverter defibrillators, cochlear implants, etc.

To avoid accidents when using wireless charger, please observe the following contents:

  • Don’t charge in the state of the wireless charger and corresponding device with metal objects (coins, clamps, metal brackets, etc.).
  • Don’t charge with a towel covered.
  • Don’t contact any liquid directly with the wireless charger, such as pure water or beverage.
  • Don’t scrub with oil, alcohol, lubricant or thinner.

Don’t use It In the state of malfunctions or exception.
When an exception occurs(water damage, smoking, sound, Peculiar smell etc.), stop using it immediately.
Please contact the sales shop, otherwise it may lead to accidents, fire and electric shock. Unauthorized repair is prohibited.

Attention behavior

  • This product supports mobile phones or devices with QI certification. Mobile phones or devices without QI certification may not be able to charge when using this product.
  • During or after charging, the charging area and the corresponding equipment will heat up, which is normal.
  • If more than one phone or device is placed in the charging area, the wireless charger can only identify and charge one phone or device.
  • Don’t give the wireless charger a strong impact force and impact force, otherwise ii may cause functional failure.
  • Because the wireless seat charge consumes more power, so when the engine stops operating, please do not use it for a long time, otherwise it may cause battery loss and affect the start of the engine.
  • Don’t bring metal accessories (metal mobile phone protective covers) for charging. Metal accessories can cause heat and cause burns.
  • Factors affecting the charging timeout: cell phone battery capacity, working environment temperature, the protective case installed on the phone and the location of the phone, etc., will affect the charging timeout. When charging the same brand of mobile phone, the new and old models of mobile phone due to different battery design, resulting in a difference in charging efficiency, which is normal.
  • When the working voltage is less than 10V, don’t run at the max load power; otherwise, the battery may be burnt out or the product may be damaged.

Use requirement

When using this product to charge the vehicle should be in ACC ON state, IG ON state or Ignition start state.

  • This product has entered the working state.

When using this product to charge, It Is recommended to remove the phone protection case, metal buckle, ate.

  • The effective charging distance of this product is less than 4.5mm. If the distance is too large, the charging efficiency will be reduced or even the charging will stop.

Do not place any other Items on the surface of the product when the mobile phone is charging.

  • This may result in low charging efficiency or failure to charge.

When charging, the canter part of the back of the phone should be placed as far as possible in the canter marked position of the anti-slip pad.

  • The center part of the back of the phone is placed in the center marked position of the product to ensure a better charging experience.

Instruction

Instruction

When the vehicle is in ACC ON state, IG ON state or Ignition start state, the product will enter the working state.

1. Place the center of the back of the phone on the Qi mark in the center of the non-slip mat.

2. After placing, you can start charging.

Functional specifications

FOD

Metal Foreign Body Detection under Charging Condition (FOD)

  1. When the mobile phone is charging, if there is a metal foreign body between the mobile phone and the wireless charger, the wireless charger will stop charging.
  2. After removing the metal foreign body between the phone and the wireless charger, the phone can be restored to normal by replacing the phone.

Over temperature protection

This product has over-temperature protection function, protect the product will not cause damage due to too high temperature;

When an internal sensor detects a temperature above 60 ° C, the product stops charging.

Overvoltage / Under voltage Protection
This product has the function of over-voltage/under-voltage protection, protection products will not be damaged due to the input of too high or too low voltage.

Over current protection
This product has the over-current protection function, the protection product will not cause damage because of the input too high current.

When the input current is too high, the product stops charging.

Troubleshooting

Your phone cannot be charged. Try the following methods. If you still can’t charge, please discuss with the special shop.

Troubleshooting

Product specification

Product specification

Maintenance And Repair Related

Failure to use the product in accordance with the requirements of this product manual causes a malfunction, even if it is within the warranty period, it can’t betreated as a warranty.

In addition, the following cases will not be repaired:

  • The damage is caused by force majeure, natural disasters such as earthquake, flood, lightning and fire, etc.
  • The damage is caused by vehicle accident.
  • The damage is caused by the fault of the consumer.

Model No: ACM-01-00

FCC ID: 2APX9-WPC

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged lo try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

APPLICANT/ MFRS: AAPICO ELECTRONICS CO.,LTD
Add: 99 Moo 1 Hitech Industrial Estate, Tambol Ban Lane, Ampur Bang-Pa-In, Ayuthaya, 13160, Thailand.

Commissioned Manufacturer: CONSERVE&ASSOCIATES, INC.

Add: No.3 Industrial Middle Rd., Science and Technology Industrial Park,
Huan Gang, Hou Jie Town, Dong Guan City, Guang Dong, China.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals