MG Chemicals 8330D Silver Conductive Epoxy Adhesive Instruction Manual
- June 5, 2024
- MG Chemicals
Table of Contents
8330D Silver Conductive Epoxy Adhesive
Instruction Manual
Silver Conductive Epoxy Adhesive
8330D is an electrically conductive, silver-filled 2-part epoxy adhesive. It
is smooth, non-sagging, thixotropic, and bonds well to a wide variety of
substrates.
This product allows for quick, cold-soldering repairs. It can also be used as
a solder replacement for bonding heat-sensitive electronic components, or for
making conductive connections where soldering is not an option, such as when
bonding to glass, soft metals, or plastics.
8330D is highly filled to maximize electrical conductivity. For a more
economical version, use 8331D. For a longer working life, use 8330S.
Features and Benefits
- Creates strong permanent electrical connections
- Cures at room temperature
- SVHC free
- Excellent adhesion to many substrates
- Room temperature storage
- Long shelf life
Cured Properties
| Resistivity | 5.3 x 10 -4 Ω·cm |
|---|---|
| Hardness | 84 D |
| Tensile Strength | 8.3 N/mm2 |
| Compressive Strength | 75 N/mm2 |
Lap Shear (stainless steel)
(aluminum)| 3.6 N/mm2
2.6 N/mm2
Glass Transition Temperature (Tg)| 40 ˚C
CTE Prior Tg| 63 ppm/˚C
CTE After Tg| 63 ppm/˚C
Thermal Conductivity @ 25 ˚C| 2 W/(m·K)
Service Temperature Range| -50–150 ˚C
Available Packaging
| Cat. No. | Packaging | Net Vol. | Net Wt. |
|---|---|---|---|
| 8330D-19G | 2 Syringe kit | 6 mL | 19.4 g |
| 8330D-160G | 2 Jar kit | 50 mL | 162.2 g |
Usage Parameters
| Working Time | 20 min |
|---|---|
| Service Cure | 65 min @ 22 ˚C |
| Mix Ratio by Volume | 1:1 |
| Mix Ratio by Weight | 1.1:1 |
Contact Information
MG Chemicals, 1210 Corporate Drive
Burlington, Ontario, Canada L7L 5R6
Email: support@mgchemicals.com
Phone:
North America: +(1)800-340-0772
International: +(1) 905-331-1396
Europe: +(44)1663 362888
Uncured Properties
| Mixed Density | 3.220 g/mL |
|---|---|
| Shelf Life | 3 y |
| Viscosity @ 25 ˚C | (A) 698.1 Pa·s |
Application Instructions
Read the product SDS and Application Guide for more detailed instructions
before using this product (downloadable at
www.mgchemicals.com).
Recommended Preparation
Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of
oils, dust, and other residues.
Syringe
- Twist and remove the cap from the syringe. Do not discard the cap.
- Measure 1 part by volume of A.
- Measure 1 part by volume of B.
- Dispense material on a mixing surface or container, and thoroughly mix parts A and B together.
- To stop the flow, pull back on the plunger.
- Clean nozzle to prevent contamination and material buildup.
- Replace the cap on the syringe.
Can or Jar
- Stir each part individually to re-incorporate material that may have separated.
- Measure 1.2 parts by weight of A.
- Measure 1 part by weight of B.
- Thoroughly mix parts A and B together.
- Apply adhesive to the application area.
Cure Instructions
Allow curing at room temperature for 6 hours, or cure the adhesive in an oven
at one of these time/temperature options:
- 10 min @ 65 ˚C
- 5 min @ 80 ˚C
Storage and Handling
Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To
maximize shelf life, recap product firmly when not in use.
Disclaimer
This information is believed to be accurate. It is intended for professional end-users who have the skills required to evaluate and use the data properly. M.G. Chemicals Ltd. does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it.
ISO 9001:2015 Quality Management System.
Burlington, Ontario, Canada
SAI Global File: 004008
23 September 2020 / Ver. 1.0