VONROC CR501AC 1100W Portable Air Compressor Instructions

VONROC CR501AC 1100W Portable Air Compressor Instructions

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety
   a) Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
   b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety
   a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
   f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety
   a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
   c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
   d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
   f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
   g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards.
   h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care
   a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   c) Disconnect the plug from the power source and/ or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
   h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Battery tool use and care
   a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
   b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
   c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
   d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
   e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
   f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
   NOTE The temperature „130 °C“ can be replaced by the temperature „265 °F“.
   g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

6. Service
   a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
   b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SPECIAL SAFETY INSTRUCTIONS

• Warning! The compressor may only be used in suitable rooms (with good ventilation and an ambient temperature from 0°C to +40°C).

• Do not perform any actions on the compressor without first having taken the plug out of the plug socket.

• Do not aim water jets or jets of flammable liquids at the compressor.

• Do not place flammable objects near the compressor.

• Switch the switch (3) to the “0” position (OFF) during dwell time.

• Never aim the air jet at persons or animals.

• N.B.: some parts of the compressor such as the head and the feed-through pipes may reach high temperatures. Do not touch these parts to avoid burns.

• Transport the compressor by lifting it or by using the special grips or handles.

• Children and animals should be kept far away from the area of operation of the machine.

• If you use the compressor to spray paint:
  a) Do not work in enclosed spaces or near naked flames.
  b) Make sure that the environment in which you will be working has dedicated ventilation.
  c) Protect your nose and mouth with a dedicated mask.

• Do not use the compressor when the electrical cable or the plug is damaged, and instruct an authorised Support Service to replace them with an original part.

• When the compressor is placed on a surface higher than the floor, it should be secured to prevent it from falling down during operation.

• Do not put objects or your hands in the protective covers to avoid physical damage and damage to the compressor.

• Do not use the compressor as a blunt instrument against persons, objects or animals in order to prevent serious damage.

• If the compressor is no longer in use, always take the plug out of the plug socket. Always make sure that compressed-air hoses are used for compressed air and which are characterised by a maximum pressure adjusted to that of the compressor. Do not try to repair the hose if it is damaged.

SAFETY INSTRUCTIONS FOR WORKING WITH COMPRESSED AIR GUNS

• The compressor and hoses can get very hot during operation. Touching them can cause burns.
• The gases or vapours sucked in by the compressor intake must be kept free of admixtures that could lead to fires or explosions inside the compressor.
• When removing the hose coupling, always holdthe hose coupling firmly to avoid injury caused by the hose flying off .
• When working with the blow-out gun, wear goggles. Foreign bodies and blown out particles can easily cause injuries.
• Do not direct the blow-out gun at people or use it to clean clothing you are wearing.

Electrical safety
When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions.

Always check that the voltage of the power supply corresponds to the voltage on the rating plate label.

Replacing cables or plugs
Immediately throw away old cables or plugs when they have been replaced by new ones. It is dangerous to insert the plug of a loose cable in the wall outlet.

Using extension cables
Only use an approved extension cable suitable for the power input of the machine. The minimum conductor size is 1.5 mm2. When using a cable reel always unwind the reel completely

MACHINE INFORMATION

Intended use

This appliance is designed for blowing air for cleaning jobs, inflating car tires, bicycle tires, inflatable mattresses, sport balls and etc. in conjunction with the supplied adapter. The appliance is not designed for continuous operation.

TECHNICAL SPECIFICATIONS

*S3 = intermittent operation without the impact of the start-up. This means that during a period of 10 minutes, the maximum operating time is 15% (1.5 min)

DESCRIPTION

1. Quick coupler air outlet
2. Accessory compartment
3. Carrying handle
4. Switch
5. Electricity cable
6. Quick coupler
7. Connector
8. Air gun
9. Manometer
10. Release valve
11. Trigger
12. Extension nozzle
13. Hose with air coupler
14. Air hose
15. Ball needle
16. Universal adapter small
17. Valve adapter
18. Universal adapter
19. Nozzle adapter for the nozzle set
20. Nozzle set

OPERATION

For household use only.

The appliance vibrates during operation. During operation, always put it down backwards on its rubber feet

Connecting the device to an outlet (Fig. A)

1. Open the cover and take out the air hose (14)and required accessories from the storage compartment (2).
2. Make sure the ON/OFF switch (4) is in the position ‘O’ (switch off).
3. Connect the electricity cable (5) to an outlet.

Before using the machine, make sure that the mains voltage complies with the specifications on the rating plate. Long supply cables, extensions, cable reels etc. cause a drop in voltage and can impede motor start up.

The appliance vibrates during operation. During operation, always put it down backwards on its rubber feet.

On/Off switch (Fig. A)

• Move the ON/OFF switch (4) into the position ‘I’ to switch the appliance on.
• Move the ON/OFF switch (4) into the position ‘O’ to switch the appliance off.

The appliance is not designed for continuous operation. To prevent the motor from overheating, the appliance may only be used as follows: Within a period of 10 minutes, the appliance may only be operated for 15% of the period so 1,5 minute. During the rest of the period (8.5 minutes) the appliance needs to cool down again.

Connecting the air gun (Fig. B1)

• Insert the connector (7) of the air gun (8) into the quick coupler (6) on the air hose. When pushing, the connector clicks into place to secure the air gun.

Disconnecting the air gun (Fig. B2)

When releasing the quick coupler, be sure to hold the coupling to protect yourself from injury from the rebounding hose.

Pull back the sleeve on the quick coupler (6) and remove the tool.

Using the air gun as blow-out pistol (Fig. C)
This way the air gun (8) can be used for blowing air for several cleaning purposes and to clear hard- toreach areas. The trigger (11) on the gun (8) allows exact dosing of the air volume.

1. Unscrew the hose (13) from the air gun (8)
2. Replace it by the extension nozzle (12).

Using the air gun for inflating car tires (Fig. C & D)
This way the air gun (8) can be used for inflating tires, inflatable beds etc.

1. In case the hose (13) is not assembled, connect it to the air gun (8) by screwing.
2. Connect the air coupler directly to a air valve of the object to be inflated. To connect: press the clamp on the hose (13) and push it onto the valve of the object.
3. First check the pressure of the object.Read the pressure on the gauge (9):
4. Pressure too high: press the button (10) on the left side to release air.
5. Pressure too low: press the trigger (11) to fill the object till required pressure.
6. Check pressure by releasing the trigger (11) and read the pressure gauge (9).
7. Disconnect the tyre inflating gun.

Check the service-manual of your car for the correct tyre pressure of your car.

The manometer (9) is not calibrated! After inflating tires always check the tire pressure with a calibrated device, for example at a petrol station.

Risk of injury! Do not pump any objects up to more than the intended pressure. They could burst and cause injury and/or material damage.

Using the adapters for inflating other items (Fig. C & D)
The air gun (8) comes with several adapter types (15-20) for inflating all kinds of objects. These adapters (15-19) can be connected directly to the air coupler (13). To connect, press the clamp on the coupler (13) and attach the adapter (15-19) you want to use.

Ball needle (Fig. C)
The ball needle (15) can be used to inflate balls. Push the needle (15) into a ball valve and inflate the ball as described above.

Universal adapter (Fig. C)
The universal adapters (16,18) facilitates easy inflation of air mattresses, swimming bands etc. Push one of the adapters (16,18) onto the valve and inflate as described above.

Valve adapter (Fig. C)
The valve adapter (17) facilitates easy inflation of bicycle tires. And works well with ‘Sclaverand’ valves, race valves and universal ‘Dunlop’ valves. Push the adapter (17) onto the valve and inflate as described above.

Nozzle set (Fig. C)
The nozzles (20) facilitates easy inflation of air mattresses, swimming bands etc. Push one of the nozzles (20) onto the nozzle adapter (19) and inflate as described above.

MAINTENANCE

Always disconnect the machine from the main power supply before carrying out any maintenance work.
Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/ EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any  failure during this period due to defective materialand/or workmanship then contact VONROC directly.

The following circumstances are excluded from this guarantee:

• Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
• Normal wear and tear;
• The tool has been abused, misused or improperly maintained;
• Non-original spare parts have been used.

This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages.  The dealers remedies shall be limited to repair orreplacement of nonconforming units or parts.

The product and the user manual are subject to change. Specifications can be changed without further notice.

References

• garna.Om
• VONROC Gereedschap & Tuin artikelen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>