wilfa XPLODE 1500 Blender Instruction Manual

wilfa XPLODE 1500 Blender

IMPORTANT SAFETY INSTRUCTIONS

• Read this user manual carefully before you use the appliance and save it for future reference.
• Never leave the appliance unattended when it is connected to the mains.
• Never immerse the appliance in water.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• Is there damage to the device or if it does not work, it must be serviced only by authorized personnel.
• Connect the appliance only to a properly installed wall socket with a voltage matching the technical data of the appliance.
• Do not let the cord hang over the edge of the table or counter or touch a hot surface.
• The motor must not come into contact with water or any other liquid, as there is the danger of an electric shock. Therefore, do not use the appliance near to a wash Basin, not with wet hands or while standing on wet ground. If the appliance has turned wet, pull the mains plug immediately out of the socket before touching the appliance.
• Do not use the appliance outdoors.
• This product is intended for household use and not for commercial use.
• Use the appliance only for the purpose it was designed for.
• Do not use an appliance, if it or parts of it show visible damage or if the appliance was dropped.
• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• An appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised.

CAUTION

We are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions that are essential for the safe use of an electrical appliance:

• There is a potential injury from misuse. Care shall be taken when handling the sharp cutting blades, emptying the bowl, and during cleaning.
• To reduce the risk of injury, never place cutter-assembly blades on the base without jar properly attached.
• Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Be careful is hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.

SPECIAL SAFETY INSTRUCTIONS FOR THIS UNIT

• Operate the blender with the lid closed.
• The blades are very sharp. Handle with care.
• Only remove the jar while the motor is off.
• Avoid overwork of the motor.
• Handle carefully with the glass jar.
• Never place your hands into the glass jar while the motor is on.
• Avoid contact with moving parts.

PRODUCT OVERVIEW

1. Measuring cup
2. Lid
3. Glass jar with level indication
4. Sealed
5. Blade assembly unit
6. Blade assembly unit interface
7. Control panel
8. Motor unit

BEFORE USING EN BUILT-IN SAFETY LOCK

This function ensures that the user can only switch the appliance on when the accessories have been placed on the unit in the correct position. When the accessories have been fixed properly, the unit can only be switched on. (i.e. Built-in safety lock function is disabled at this moment)

BEFORE FIRST USE

Clean the unit and parts thoroughly before you use the appliance for the first time

OPERATION

To switch on the appliance, turn the knob to the “ON” position. The “ON” light will be illuminated. To control the rotary speed, turn the knob between the “MIN” &  MAX” positions.

CONTROL PANEL

1. ON/ OFF switch
2. Speed control (MIN -> MAX)
3. Pulse/Auto clean button

PULSE/AUTO CLEAN BUTTON

This function is only working when the blender is already running. When the blender is running, the button is pushed to get the blender quickly up to full speed. When the button is released, the blender gets down to pre-set speed again. This function is suitable for ice-crushing or cleaning.
Warning: Do not add more than 8pcs ice cubes (less than 20 x 20 x 20mm size of the ice) in a glass jar at a time

HOW TO USE THE GLASS JAR

1. Place the ingredients in the glass jar.
2. Place the lid on the jar and close it tightly.
3. Insert the measuring cup into the lid opening.
4. Select the speed by turning the control knob or pressing the Quick-select button

Note: Do not let the appliance operate for more than 2 minutes continuously. Let the appliance cool down to room temperature before continuing to operate the appliance

AFTER USING THE BLENDER

1. Disconnect the power from the main supply.
2. Remove the lid (together with the measuring cup) from the jar.
3. Remove the jar (together with the blade assembly unit interface) from the motor part.
   Note: Always clean the removable parts immediately after use.
   Note: It is recommended to cut the meat or other food into smaller pieces before putting them in the jar. Do not operate with large quantities of food at one time

CLEANING & MAINTENANCE EN

Always clean the removable parts immediately after use.
Note: Be careful when cleaning the parts. Avoid touching the sharp blades!

1. Disconnect the power from main supply.
2. Disassemble all removable parts before cleaning.
3. Clean all removable parts in lukewarm water with dishwashing liquid.
4. Use dry cloth to clean the main body.

GUARANTEE

Wilfa issues a 5 year guarantee on this product from the day of purchase. The guarantee covers production failure or defects that arise during the guarantee period. Your purchase receipt works as proof towards retailer if claiming your guarantee. The guarantee is valid only for products that are bought and used in private households. The guarantee is not valid if the product is used commercially. The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modified or if unauthorized reparation is done. The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:

• Overloading of product
• Damage on glass
• Parts which are normally worn down

PRODUCT SPECIFICATIONS

• 220-240V~ 50/60Hz, 1500W

SUPPORT AND SPARE PARTS

For support please visit us at wilfa.com, and see our customer service/support page. Here you will find frequently asked questions, spare parts, tips and tricks and all our contact information

RECYCLABILITY

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling free of charge

References

• Wilfa - Norwegian quality since 1948 – Wilfa AS
• Koti - Wilfa
• Wilfa - Norwegian quality since 1948 – Wilfa AS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>